This object applies only to Ethernet frames
using the 802.1P/Qtag header (indicated with
EtherType 0x8100). Such frames include a 16-bit
Tag that contains a 3-bit Priority field and
a 12-bit VLAN number.
Tagged Ethernet packets must have a 3-bit
Priority field within the range of
docsIetfQosPktClassPriLow to
docsIetfQosPktClassPriHigh in order to match this
rule.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 7.
Parsed from file DOCS-IETF-QOS-MIB.mib
Module: DOCS-IETF-QOS-MIB
This object applies only to Ethernet frames
using the 802.1P/Qtag header (indicated with
EtherType 0x8100). Such frames include a 16-bit
Tag that contains a 3-bit Priority field and
a 12-bit VLAN number.
Tagged Ethernet packets must have a 3-bit
Priority field within the range of
docsIetfQosPktClassPriLow to
docsIetfQosPktClassPriHigh in order to match this
rule.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 7.
This object applies only to Ethernet frames
using the 802.1P/Qtag header (indicated with
EtherType 0x8100). Such frames include a 16-bit
Tag that contains a 3-bit Priority field and
a 12-bit VLAN number.
Tagged Ethernet packets must have a 3-bit
Priority field within the range of
docsIetfQosPktClassPriLow to
docsIetfQosPktClassPriHigh in order to match this
rule.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 7.
Parsed from file rfc4323-IPCDN-DOCSIS-QoS.mib.txt
Company: None
Module: DOCS-IETF-QOS-MIB
This object applies only to Ethernet frames
using the 802.1P/Qtag header (indicated with
EtherType 0x8100). Such frames include a 16-bit
Tag that contains a 3-bit Priority field and
a 12-bit VLAN number.
Tagged Ethernet packets must have a 3-bit
Priority field within the range of
docsIetfQosPktClassPriLow to
docsIetfQosPktClassPriHigh in order to match this
rule.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 7.
docsIetfQosPktClassUserPriHigh OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This object applies only to Ethernet frames using the 802.1P/Qtag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a 3-bit Priority field and a 12-bit VLAN number. Tagged Ethernet packets must have a 3-bit Priority field within the range of docsIetfQosPktClassPriLow to docsIetfQosPktClassPriHigh in order to match this rule. If the referenced parameter is not present in the classifier, the value of this object is reported as 7." REFERENCE "SP-RFIv2.0-I06-040804, Appendix C.2.1.7.1" ::= { docsIetfQosPktClassEntry 23 }
docsIetfQosPktClassUserPriHigh OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-only STATUS mandatory DESCRIPTION "This object applies only to Ethernet frames using the 802.1P/Qtag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a 3-bit Priority field and a 12-bit VLAN number. Tagged Ethernet packets must have a 3-bit Priority field within the range of docsIetfQosPktClassPriLow to docsIetfQosPktClassPriHigh in order to match this rule. If the referenced parameter is not present in the classifier, the value of this object is reported as 7." REFERENCE "SP-RFIv2.0-I06-040804, Appendix C.2.1.7.1" ::= { docsIetfQosPktClassEntry 23 }
Vendor: Cisco Systems
Module: DOCS-IETF-QOS-MIB (DOCS-IETF-QOS-MIB-V1SMI.my)
Type: TABULAR
Access: read-only
Syntax: INTEGER
(
0..7 )
Automatically extracted from www.mibdepot.com
docsIetfQosPktClassUserPriHigh OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This object applies only to Ethernet frames using the 802.1P/Qtag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a 3-bit Priority field and a 12-bit VLAN number. Tagged Ethernet packets must have a 3-bit Priority field within the range of docsIetfQosPktClassPriLow to docsIetfQosPktClassPriHigh in order to match this rule. If the referenced parameter is not present in the classifier, the value of this object is reported as 7." REFERENCE "SP-RFIv2.0-I06-040804, Appendix C.2.1.7.1" ::= { docsIetfQosPktClassEntry 23 }
docsIetfQosPktClassUserPriHigh OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This object applies only to Ethernet frames using the 802.1P/Qtag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a 3-bit Priority field and a 12-bit VLAN number. Tagged Ethernet packets must have a 3-bit Priority field within the range of docsIetfQosPktClassPriLow to docsIetfQosPktClassPriHigh in order to match this rule. If the referenced parameter is not present in the classifier, the value of this object is reported as 7." REFERENCE "SP-RFIv2.0-I06-040804, Appendix C.2.1.7.1" ::= { docsIetfQosPktClassEntry 23 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.127.1.1.1.1 | docsIetfQosPktClassId | 0 | 0 | Index assigned to packet classifier entry by the CMTS, which is unique per Service Flow. |
1.3.6.1.2.1.127.1.1.1.2 | docsIetfQosPktClassDirection | 0 | 0 | Indicates the direction to which the classifier is applied. |
1.3.6.1.2.1.127.1.1.1.3 | docsIetfQosPktClassPriority | 0 | 0 | The value specifies the order of evaluation of the classifiers. The higher the value, the higher the priority. The value of 0 is u… |
1.3.6.1.2.1.127.1.1.1.4 | docsIetfQosPktClassIpTosLow | 0 | 0 | The low value of a range of TOS byte values. If the referenced parameter is not present in a classifier, this object reports the … |
1.3.6.1.2.1.127.1.1.1.5 | docsIetfQosPktClassIpTosHigh | 0 | 0 | The 8-bit high value of a range of TOS byte values. If the referenced parameter is not present in a classifier, this object report… |
1.3.6.1.2.1.127.1.1.1.6 | docsIetfQosPktClassIpTosMask | 0 | 0 | The mask value is bitwise ANDed with TOS byte in an IP packet, and this value is used for range checking of TosLow and TosHigh. If… |
1.3.6.1.2.1.127.1.1.1.7 | docsIetfQosPktClassIpProtocol | 0 | 0 | This object indicates the value of the IP Protocol field required for IP packets to match this rule. The value 256 matches traffic… |
1.3.6.1.2.1.127.1.1.1.8 | docsIetfQosPktClassInetAddressType | 0 | 0 | The type of the Internet address for docsIetfQosPktClassInetSourceAddr, docsIetfQosPktClassInetSourceMask, docsIetfQosPktClassInet… |
1.3.6.1.2.1.127.1.1.1.9 | docsIetfQosPktClassInetSourceAddr | 0 | 0 | This object specifies the value of the IP Source Address required for packets to match this rule. An IP packet matches the rule wh… |
1.3.6.1.2.1.127.1.1.1.10 | docsIetfQosPktClassInetSourceMask | 0 | 0 | This object specifies which bits of a packet's IP Source Address are compared to match this rule. An IP packet matches the rule wh… |
1.3.6.1.2.1.127.1.1.1.11 | docsIetfQosPktClassInetDestAddr | 0 | 0 | This object specifies the value of the IP Destination Address required for packets to match this rule. An IP packet matches the ru… |
1.3.6.1.2.1.127.1.1.1.12 | docsIetfQosPktClassInetDestMask | 0 | 0 | This object specifies which bits of a packet's IP Destination Address are compared to match this rule. An IP packet matches the ru… |
1.3.6.1.2.1.127.1.1.1.13 | docsIetfQosPktClassSourcePortStart | 0 | 0 | This object specifies the low-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This object is i… |
1.3.6.1.2.1.127.1.1.1.14 | docsIetfQosPktClassSourcePortEnd | 0 | 0 | This object specifies the high-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This object is … |
1.3.6.1.2.1.127.1.1.1.15 | docsIetfQosPktClassDestPortStart | 0 | 0 | This object specifies the low-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the refere… |
1.3.6.1.2.1.127.1.1.1.16 | docsIetfQosPktClassDestPortEnd | 0 | 0 | This object specifies the high-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the refer… |
1.3.6.1.2.1.127.1.1.1.17 | docsIetfQosPktClassDestMacAddr | 0 | 0 | An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with docsIetfQosPktClassDestMacMask equals the… |
1.3.6.1.2.1.127.1.1.1.18 | docsIetfQosPktClassDestMacMask | 0 | 0 | An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with docsIetfQosPktClassDestMacMask equals the… |
1.3.6.1.2.1.127.1.1.1.19 | docsIetfQosPktClassSourceMacAddr | 0 | 0 | An Ethernet packet matches this entry when its source MAC address equals the value of this object. If the referenced parameter is … |
1.3.6.1.2.1.127.1.1.1.20 | docsIetfQosPktClassEnetProtocolType | 0 | 0 | This object indicates the format of the layer 3 protocol ID in the Ethernet packet. A value of none(0) means that the rule does … |
1.3.6.1.2.1.127.1.1.1.21 | docsIetfQosPktClassEnetProtocol | 0 | 0 | If docsIetfQosEthPktClassProtocolType is none(0), this object is ignored when considering whether a packet matches the current ru… |
1.3.6.1.2.1.127.1.1.1.22 | docsIetfQosPktClassUserPriLow | 0 | 0 | This object applies only to Ethernet frames using the 802.1P/Q tag header (indicated with EtherType 0x8100). Such frames include… |
1.3.6.1.2.1.127.1.1.1.24 | docsIetfQosPktClassVlanId | 0 | 0 | This object applies only to Ethernet frames using the 802.1P/Q tag header. Tagged packets must have a VLAN Identifier that matches… |
1.3.6.1.2.1.127.1.1.1.25 | docsIetfQosPktClassStateActive | 0 | 0 | This object indicates whether or not the classifier is enabled to classify packets to a Service Flow. If the referenced parameter… |
1.3.6.1.2.1.127.1.1.1.26 | docsIetfQosPktClassPkts | 0 | 0 | This object counts the number of packets that have been classified using this entry. This includes all packets delivered to a Se… |
1.3.6.1.2.1.127.1.1.1.27 | docsIetfQosPktClassBitMap | 0 | 0 | This object indicates which parameter encodings were actually present in the DOCSIS packet classifier encoding signaled in the DO… |