The number of times the LAN Level 2 Designated
Intermediate System has changed.
Parsed from file zebos_ISIS_MIB.mib.txt
Company: ruijie
Module: ISIS-MIB
isisCircLANL2DesISChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the LAN Level 2 Designated Intermediate System has changed." REFERENCE "{ISIS.aoi lanL2DesignatedIntermediateSystemChanges (76)}" ::= { isisCircEntry 32 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.138.1.3.2.1.1 | isisCircIndex, isisCircSysInstance | 0 | 0 | The identifier of this circuit, unique within the instance of the IS-IS protocol. This object follows the index behavior. This i… |
| 1.3.6.1.2.1.138.1.3.2.1.2 | isisCircIfIndex | 0 | 0 | The value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creation. |
| 1.3.6.1.2.1.138.1.3.2.1.3 | isisCircAdminState, isisCircIfSubIndex | 0 | 0 | The administrative state of the circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.4 | isisCircExistState | 0 | 0 | The existence state of this circuit. Setting the state to 'notInService' halts the generation and processing of IS-IS protocol P… |
| 1.3.6.1.2.1.138.1.3.2.1.5 | isisCircType, isisCircLocalID | 0 | 0 | The type of the circuit. This object follows the ReplaceOnlyWhileDisabled behavior. The type specified must be compatible with … |
| 1.3.6.1.2.1.138.1.3.2.1.6 | isisCircExtDomain, isisCircOperState | 0 | 0 | If true, suppress normal transmission of and interpretation of Intra-domain IS-IS PDUs on this circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.7 | isisCircLevelType | 0 | 0 | Indicates which type of packets will be sent and accepted on this circuit. The values set will be saved, but the values used wil… |
| 1.3.6.1.2.1.138.1.3.2.1.8 | isisCircPassiveCircuit, isisCircLevel | 0 | 0 | Should we include this interface in LSPs, even if it is not running the IS-IS Protocol? |
| 1.3.6.1.2.1.138.1.3.2.1.9 | isisCircMeshGroupEnabled, isisCircL1DefaultMetric | 0 | 0 | Is this port a member of a mesh group, or is it blocked? Circuits in the same mesh group act as a virtual multiaccess network. … |
| 1.3.6.1.2.1.138.1.3.2.1.10 | isisCircMeshGroup, isisCircL1DelayMetric | 0 | 0 | The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not sup… |
| 1.3.6.1.2.1.138.1.3.2.1.11 | isisCircSmallHellos, isisCircL1ExpenseMetric | 0 | 0 | The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not s… |
| 1.3.6.1.2.1.138.1.3.2.1.12 | isisCircLastUpTime, isisCircL1ErrorMetric | 0 | 0 | The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not sup… |
| 1.3.6.1.2.1.138.1.3.2.1.13 | isisCirc3WayEnabled | 0 | 0 | Is this circuit enabled to run 3Way handshake? |
| 1.3.6.1.2.1.138.1.3.2.1.14 | isisCircExtendedCircID | 0 | 0 | The value to be used as the extended circuit ID in 3Way handshake. This value is only used if isisCirc3WayEnabled is true, and i… |
| 1.3.6.1.2.1.138.1.3.2.1.17 | isisCircOutCtrlPDUs | 0 | 0 | The number of IS-IS control PDUs sent on this circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.18 | isisCircInCtrlPDUs | 0 | 0 | The number of IS-IS control PDUs received on this circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.20 | isisCircL2DefaultMetric | 0 | 0 | The default metric value of this circuit for level 2 traffic. |
| 1.3.6.1.2.1.138.1.3.2.1.21 | isisCircL2DelayMetric | 0 | 0 | The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not sup… |
| 1.3.6.1.2.1.138.1.3.2.1.22 | isisCircL2ExpenseMetric | 0 | 0 | The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not s… |
| 1.3.6.1.2.1.138.1.3.2.1.23 | isisCircL2ErrorMetric | 0 | 0 | The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not sup… |
| 1.3.6.1.2.1.138.1.3.2.1.24 | isisCircManL2Only | 0 | 0 | When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour… |
| 1.3.6.1.2.1.138.1.3.2.1.25 | isisCircL1ISPriority | 0 | 0 | The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.26 | isisCircL1CircID | 0 | 0 | The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it i… |
| 1.3.6.1.2.1.138.1.3.2.1.27 | isisCircL1DesIS | 0 | 0 | The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the … |
| 1.3.6.1.2.1.138.1.3.2.1.28 | isisCircLANL1DesISChanges | 0 | 0 | The number of times the LAN Level 1 Designated Intermediate System has changed. |
| 1.3.6.1.2.1.138.1.3.2.1.29 | isisCircL2ISPriority | 0 | 0 | The priority for becoming LAN level 2 Designated Intermediate System. |
| 1.3.6.1.2.1.138.1.3.2.1.30 | isisCircL2CircID | 0 | 0 | The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it … |
| 1.3.6.1.2.1.138.1.3.2.1.31 | isisCircL2DesIS | 0 | 0 | The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the… |
| 1.3.6.1.2.1.138.1.3.2.1.33 | isisCircMCAddr | 0 | 0 | Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.34 | isisCircPtToPtCircID | 0 | 0 | The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End… |
| 1.3.6.1.2.1.138.1.3.2.1.35 | isisCircL1HelloTimer | 0 | 0 | Maximum period, in milliseconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos … |
| 1.3.6.1.2.1.138.1.3.2.1.36 | isisCircL2HelloTimer | 0 | 0 | Maximum period, in milliseconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behavi… |
| 1.3.6.1.2.1.138.1.3.2.1.37 | isisCircL1HelloMultiplier | 0 | 0 | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in tr… |
| 1.3.6.1.2.1.138.1.3.2.1.38 | isisCircL2HelloMultiplier | 0 | 0 | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in tr… |
| 1.3.6.1.2.1.138.1.3.2.1.39 | isisCircDRL1HelloTimer | 0 | 0 | Period, in milliseconds, between Level 1 PDUs on multiaccess networks when this IS is the Designated Intermediate System. This o… |
| 1.3.6.1.2.1.138.1.3.2.1.40 | isisCircDRL2HelloTimer | 0 | 0 | Period, in milliseconds, between Level 2 PDUs on multiaccess networks when this IS is the Designated Intermediate System. This o… |
| 1.3.6.1.2.1.138.1.3.2.1.41 | isisCircMinBroadLSPTransInt | 0 | 0 | Minimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer be… |
| 1.3.6.1.2.1.138.1.3.2.1.42 | isisCircL1MinLSPTransInt | 0 | 0 | Minimum interval, in seconds, between re-transmission of an Level 1 LSP. This object follows the resettingTimer behaviour. |
| 1.3.6.1.2.1.138.1.3.2.1.43 | isisCircL2MinLSPTransInt | 0 | 0 | Minimum interval, in seconds, between re-transmission of an Level 2 LSP. This object follows the resettingTimer behaviour. |
| 1.3.6.1.2.1.138.1.3.2.1.44 | isisCircL1CSNPInterval | 0 | 0 | Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated rout… |
| 1.3.6.1.2.1.138.1.3.2.1.45 | isisCircL2CSNPInterval | 0 | 0 | Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated rout… |
| 1.3.6.1.2.1.138.1.3.2.1.46 | isisCircL1PartSNPInterval | 0 | 0 | Minimum interval between sending Level 1 Partial Sequence Number PDUs. This object follows the resettingTimer behaviour. |
| 1.3.6.1.2.1.138.1.3.2.1.47 | isisCircL2PartSNPInterval | 0 | 0 | Minimum interval between sending Level 2 Partial Sequence Number PDUs. This object follows the resettingTimer behaviour. |
| 1.3.6.1.2.1.138.1.3.2.1.48 | isisCircLSPThrottle | 0 | 0 | Minimal interval of time, in milliseconds, between transmissions of LSPs on a point to point interface. |
| 1.3.6.1.2.1.138.1.3.2.1.52 | isisCircL1AuthType | 0 | 0 | What authentication scheme, if any, is used to protect Level 1 and Point-to-Point hello packets? |
| 1.3.6.1.2.1.138.1.3.2.1.53 | isisCircL1AuthKey, isisCircL1Password | 0 | 0 | The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets whenever the corresponding instance of… |
| 1.3.6.1.2.1.138.1.3.2.1.54 | isisCircL2AuthType | 0 | 0 | What authentication scheme, if any, is used to protect Level 2 hello packets? |
| 1.3.6.1.2.1.138.1.3.2.1.55 | isisCircL2Password, isisCircL2AuthKey | 0 | 0 | The value to be used as the Authentication Key in Level 1 Hello packets whenever the corresponding instance of isisCircL1AuthType… |
| 1.3.6.1.2.1.138.1.3.2.1.57 | isisManAdjNeighNSAP | 0 | 0 | The address of the neighbour if this is a manual adjacency. This object follows the replaceOnlyWhileDisabled behaviour. This is n… |
| 1.3.6.1.2.1.138.1.3.2.1.58 | isisManAdjNeighSNPA | 0 | 0 | The SNPA of the neighbour if this is a manual adjacency. This object follows the replaceOnlyWhileDisabled behaviour. This is not … |
| 1.3.6.1.2.1.138.1.3.2.1.59 | isisCircIPEncaps | 0 | 0 | Should we encapsulate IS-IS in IP packets?. |
| 1.3.6.1.2.1.138.1.3.2.1.60 | isisCircUpTime | 0 | 0 | The amount of time in seconds since this circuit entered state 'up'. Note: This can be implemented as start time less the current… |