The type of the circuit. This object follows the
ReplaceOnlyWhileDisabled behavior. The type specified
must be compatible with the type of the interface defined
by the value of isisCircIfIndex.
Parsed from file ISIS-MIB.mib
Module: ISIS-MIB
The type of the circuit. This object follows the
ReplaceOnlyWhileDisabled behavior. The type specified
must be compatible with the type of the interface defined
by the value of isisCircIfIndex.
isisCircType OBJECT-TYPE
SYNTAX INTEGER
{
broadcast(1),
ptToPt(2),
staticIn(3),
staticOut(4),
dA(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the circuit. This object follows the
ReplaceOnlyWhileDisabled behavior. The type specified
must be compatible with the type of the interface defined
by the value of isisCircIfIndex."
REFERENCE "{ISIS.aoi type (33)}"
View at oid-info.com
An identification that can be used in protocol packets
to identify a circuit. Values of isisCircLocalID do
not need to be unique. They are only required to differ
on LANs where the Intermediate System is the Designated
Intermediate System.
Parsed from file zebos_ISIS_MIB.mib.txt
Company: None
Module: ISIS-MIB
The type of the circuit. This object follows the
ReplaceOnlyWhileDisabled behavior. The type specified
must be compatible with the type of the interface defined
by the value of isisCircIfIndex.
isisCircType OBJECT-TYPE SYNTAX INTEGER { broadcast(1), ptToPt(2), staticIn(3), staticOut(4), dA(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the circuit. This object follows the ReplaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex." REFERENCE "{ISIS.aoi type (33)}" ::= { isisCircEntry 5 }
isisCircType OBJECT-TYPE SYNTAX INTEGER { broadcast(1), ptToPt(2), staticIn(3), staticOut(4), dA(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of the circuit. This object follows the ReplaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex." REFERENCE "{ISIS.aoi type (33)}" ::= { isisCircEntry 5 }
Automatically extracted from RFC4444
isisCircLocalID OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "An identification that can be used in protocol packets to identify a circuit. Values of isisCircLocalID do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System." ::= { isisCircEntry 5 }
isisCircType OBJECT-TYPE SYNTAX INTEGER { broadcast(1), ptToPt(2), staticIn(3), staticOut(4), dA(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the circuit. This object follows the ReplaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex." REFERENCE "{ISIS.aoi type (33)}" ::= { isisCircEntry 5 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.138.1.3.2.1.1 | isisCircIndex, isisCircSysInstance | 0 | 0 | The identifier of this circuit, unique within the instance of the IS-IS protocol. This object follows the index behavior. This i… |
| 1.3.6.1.2.1.138.1.3.2.1.2 | isisCircIfIndex | 0 | 0 | The value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creation. |
| 1.3.6.1.2.1.138.1.3.2.1.3 | isisCircAdminState, isisCircIfSubIndex | 0 | 0 | The administrative state of the circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.4 | isisCircExistState | 0 | 0 | The existence state of this circuit. Setting the state to 'notInService' halts the generation and processing of IS-IS protocol P… |
| 1.3.6.1.2.1.138.1.3.2.1.6 | isisCircExtDomain, isisCircOperState | 0 | 0 | If true, suppress normal transmission of and interpretation of Intra-domain IS-IS PDUs on this circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.7 | isisCircLevelType | 0 | 0 | Indicates which type of packets will be sent and accepted on this circuit. The values set will be saved, but the values used wil… |
| 1.3.6.1.2.1.138.1.3.2.1.8 | isisCircPassiveCircuit, isisCircLevel | 0 | 0 | Should we include this interface in LSPs, even if it is not running the IS-IS Protocol? |
| 1.3.6.1.2.1.138.1.3.2.1.9 | isisCircMeshGroupEnabled, isisCircL1DefaultMetric | 0 | 0 | Is this port a member of a mesh group, or is it blocked? Circuits in the same mesh group act as a virtual multiaccess network. … |
| 1.3.6.1.2.1.138.1.3.2.1.10 | isisCircMeshGroup, isisCircL1DelayMetric | 0 | 0 | The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not sup… |
| 1.3.6.1.2.1.138.1.3.2.1.11 | isisCircSmallHellos, isisCircL1ExpenseMetric | 0 | 0 | The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not s… |
| 1.3.6.1.2.1.138.1.3.2.1.12 | isisCircLastUpTime, isisCircL1ErrorMetric | 0 | 0 | The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not sup… |
| 1.3.6.1.2.1.138.1.3.2.1.13 | isisCirc3WayEnabled | 0 | 0 | Is this circuit enabled to run 3Way handshake? |
| 1.3.6.1.2.1.138.1.3.2.1.14 | isisCircExtendedCircID | 0 | 0 | The value to be used as the extended circuit ID in 3Way handshake. This value is only used if isisCirc3WayEnabled is true, and i… |
| 1.3.6.1.2.1.138.1.3.2.1.17 | isisCircOutCtrlPDUs | 0 | 0 | The number of IS-IS control PDUs sent on this circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.18 | isisCircInCtrlPDUs | 0 | 0 | The number of IS-IS control PDUs received on this circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.20 | isisCircL2DefaultMetric | 0 | 0 | The default metric value of this circuit for level 2 traffic. |
| 1.3.6.1.2.1.138.1.3.2.1.21 | isisCircL2DelayMetric | 0 | 0 | The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not sup… |
| 1.3.6.1.2.1.138.1.3.2.1.22 | isisCircL2ExpenseMetric | 0 | 0 | The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not s… |
| 1.3.6.1.2.1.138.1.3.2.1.23 | isisCircL2ErrorMetric | 0 | 0 | The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not sup… |
| 1.3.6.1.2.1.138.1.3.2.1.24 | isisCircManL2Only | 0 | 0 | When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour… |
| 1.3.6.1.2.1.138.1.3.2.1.25 | isisCircL1ISPriority | 0 | 0 | The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.26 | isisCircL1CircID | 0 | 0 | The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it i… |
| 1.3.6.1.2.1.138.1.3.2.1.27 | isisCircL1DesIS | 0 | 0 | The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the … |
| 1.3.6.1.2.1.138.1.3.2.1.28 | isisCircLANL1DesISChanges | 0 | 0 | The number of times the LAN Level 1 Designated Intermediate System has changed. |
| 1.3.6.1.2.1.138.1.3.2.1.29 | isisCircL2ISPriority | 0 | 0 | The priority for becoming LAN level 2 Designated Intermediate System. |
| 1.3.6.1.2.1.138.1.3.2.1.30 | isisCircL2CircID | 0 | 0 | The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it … |
| 1.3.6.1.2.1.138.1.3.2.1.31 | isisCircL2DesIS | 0 | 0 | The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the… |
| 1.3.6.1.2.1.138.1.3.2.1.32 | isisCircLANL2DesISChanges | 0 | 0 | The number of times the LAN Level 2 Designated Intermediate System has changed. |
| 1.3.6.1.2.1.138.1.3.2.1.33 | isisCircMCAddr | 0 | 0 | Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit. |
| 1.3.6.1.2.1.138.1.3.2.1.34 | isisCircPtToPtCircID | 0 | 0 | The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End… |
| 1.3.6.1.2.1.138.1.3.2.1.35 | isisCircL1HelloTimer | 0 | 0 | Maximum period, in milliseconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos … |
| 1.3.6.1.2.1.138.1.3.2.1.36 | isisCircL2HelloTimer | 0 | 0 | Maximum period, in milliseconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behavi… |
| 1.3.6.1.2.1.138.1.3.2.1.37 | isisCircL1HelloMultiplier | 0 | 0 | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in tr… |
| 1.3.6.1.2.1.138.1.3.2.1.38 | isisCircL2HelloMultiplier | 0 | 0 | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in tr… |
| 1.3.6.1.2.1.138.1.3.2.1.39 | isisCircDRL1HelloTimer | 0 | 0 | Period, in milliseconds, between Level 1 PDUs on multiaccess networks when this IS is the Designated Intermediate System. This o… |
| 1.3.6.1.2.1.138.1.3.2.1.40 | isisCircDRL2HelloTimer | 0 | 0 | Period, in milliseconds, between Level 2 PDUs on multiaccess networks when this IS is the Designated Intermediate System. This o… |
| 1.3.6.1.2.1.138.1.3.2.1.41 | isisCircMinBroadLSPTransInt | 0 | 0 | Minimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer be… |
| 1.3.6.1.2.1.138.1.3.2.1.42 | isisCircL1MinLSPTransInt | 0 | 0 | Minimum interval, in seconds, between re-transmission of an Level 1 LSP. This object follows the resettingTimer behaviour. |
| 1.3.6.1.2.1.138.1.3.2.1.43 | isisCircL2MinLSPTransInt | 0 | 0 | Minimum interval, in seconds, between re-transmission of an Level 2 LSP. This object follows the resettingTimer behaviour. |
| 1.3.6.1.2.1.138.1.3.2.1.44 | isisCircL1CSNPInterval | 0 | 0 | Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated rout… |
| 1.3.6.1.2.1.138.1.3.2.1.45 | isisCircL2CSNPInterval | 0 | 0 | Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated rout… |
| 1.3.6.1.2.1.138.1.3.2.1.46 | isisCircL1PartSNPInterval | 0 | 0 | Minimum interval between sending Level 1 Partial Sequence Number PDUs. This object follows the resettingTimer behaviour. |
| 1.3.6.1.2.1.138.1.3.2.1.47 | isisCircL2PartSNPInterval | 0 | 0 | Minimum interval between sending Level 2 Partial Sequence Number PDUs. This object follows the resettingTimer behaviour. |
| 1.3.6.1.2.1.138.1.3.2.1.48 | isisCircLSPThrottle | 0 | 0 | Minimal interval of time, in milliseconds, between transmissions of LSPs on a point to point interface. |
| 1.3.6.1.2.1.138.1.3.2.1.52 | isisCircL1AuthType | 0 | 0 | What authentication scheme, if any, is used to protect Level 1 and Point-to-Point hello packets? |
| 1.3.6.1.2.1.138.1.3.2.1.53 | isisCircL1AuthKey, isisCircL1Password | 0 | 0 | The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets whenever the corresponding instance of… |
| 1.3.6.1.2.1.138.1.3.2.1.54 | isisCircL2AuthType | 0 | 0 | What authentication scheme, if any, is used to protect Level 2 hello packets? |
| 1.3.6.1.2.1.138.1.3.2.1.55 | isisCircL2Password, isisCircL2AuthKey | 0 | 0 | The value to be used as the Authentication Key in Level 1 Hello packets whenever the corresponding instance of isisCircL1AuthType… |
| 1.3.6.1.2.1.138.1.3.2.1.57 | isisManAdjNeighNSAP | 0 | 0 | The address of the neighbour if this is a manual adjacency. This object follows the replaceOnlyWhileDisabled behaviour. This is n… |
| 1.3.6.1.2.1.138.1.3.2.1.58 | isisManAdjNeighSNPA | 0 | 0 | The SNPA of the neighbour if this is a manual adjacency. This object follows the replaceOnlyWhileDisabled behaviour. This is not … |
| 1.3.6.1.2.1.138.1.3.2.1.59 | isisCircIPEncaps | 0 | 0 | Should we encapsulate IS-IS in IP packets?. |
| 1.3.6.1.2.1.138.1.3.2.1.60 | isisCircUpTime | 0 | 0 | The amount of time in seconds since this circuit entered state 'up'. Note: This can be implemented as start time less the current… |