dot3ExtPkgObjectPowerDown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to power down the EPON interface.
The interface may be unavailable while the power down
occurs and data may be lost.
Setting this object to true(1) will cause the interface
to enter into power down mode. Setting this object to
false(2) will cause the interface to go out of power
down mode. When getting true(1), the interface is in
power down mode. When getting false(2), the interface is
not in power down mode.
The write operation is not restricted in this document
and can be done at any time. Changing
dot3ExtPkgObjectPowerDown state can lead to a power down
of the respective interface, leading to an interruption
of service of the users connected to the respective EPON
interface.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface.
A power down/up of a specific virtual interface affects
only the virtual interface and not the physical
interface. Hence a virtual link, which needs a certain
handling, can be powered down and then powered up without
disrupting the operation of other virtual interfaces.
The object is relevant when the admin state of the
interface is active as set by the dot3MpcpAdminState."
DEFVAL { false }
View at oid-info.com
This object is used to power down the EPON interface.
The interface may be unavailable while the power down
occurs and data may be lost.
Setting this object to true(1) will cause the interface
to enter into power down mode. Setting this object to
false(2) will cause the interface to go out of power
down mode. When getting true(1), the interface is in
power down mode. When getting false(2), the interface is
not in power down mode.
The write operation is not restricted in this document
and can be done at any time. Changing
dot3ExtPkgObjectPowerDown state can lead to a power down
of the respective interface, leading to an interruption
of service of the users connected to the respective EPON
interface.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface.
A power down/up of a specific virtual interface affects
only the virtual interface and not the physical
interface. Hence a virtual link, which needs a certain
handling, can be powered down and then powered up without
disrupting the operation of other virtual interfaces.
The object is relevant when the admin state of the
interface is active as set by the dot3MpcpAdminState.
Parsed from file rfc4837-Ethernet-Passive-Optical-Networks-EPON.mib.txt
Company: None
Module: DOT3-EPON-MIB
This object is used to power down the EPON interface.
The interface may be unavailable while the power down
occurs and data may be lost.
Setting this object to true(1) will cause the interface
to enter into power down mode. Setting this object to
false(2) will cause the interface to go out of power
down mode. When getting true(1), the interface is in
power down mode. When getting false(2), the interface is
not in power down mode.
The write operation is not restricted in this document
and can be done at any time. Changing
dot3ExtPkgObjectPowerDown state can lead to a power down
of the respective interface, leading to an interruption
of service of the users connected to the respective EPON
interface.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface.
A power down/up of a specific virtual interface affects
only the virtual interface and not the physical
interface. Hence a virtual link, which needs a certain
handling, can be powered down and then powered up without
disrupting the operation of other virtual interfaces.
The object is relevant when the admin state of the
interface is active as set by the dot3MpcpAdminState.
Parsed from file DOT3-EPON-MIB.mib
Module: DOT3-EPON-MIB
Automatically extracted from RFC4837
dot3ExtPkgObjectPowerDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to power down the EPON interface. The interface may be unavailable while the power down occurs and data may be lost. Setting this object to true(1) will cause the interface to enter into power down mode. Setting this object to false(2) will cause the interface to go out of power down mode. When getting true(1), the interface is in power down mode. When getting false(2), the interface is not in power down mode. The write operation is not restricted in this document and can be done at any time. Changing dot3ExtPkgObjectPowerDown state can lead to a power down of the respective interface, leading to an interruption of service of the users connected to the respective EPON interface. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface. A power down/up of a specific virtual interface affects only the virtual interface and not the physical interface. Hence a virtual link, which needs a certain handling, can be powered down and then powered up without disrupting the operation of other virtual interfaces. The object is relevant when the admin state of the interface is active as set by the dot3MpcpAdminState." DEFVAL { false } ::= { dot3ExtPkgControlEntry 2 }
dot3ExtPkgObjectPowerDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to power down the EPON interface. The interface may be unavailable while the power down occurs and data may be lost. Setting this object to true(1) will cause the interface to enter into power down mode. Setting this object to false(2) will cause the interface to go out of power down mode. When getting true(1), the interface is in power down mode. When getting false(2), the interface is not in power down mode. The write operation is not restricted in this document and can be done at any time. Changing dot3ExtPkgObjectPowerDown state can lead to a power down of the respective interface, leading to an interruption of service of the users connected to the respective EPON interface. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface. A power down/up of a specific virtual interface affects only the virtual interface and not the physical interface. Hence a virtual link, which needs a certain handling, can be powered down and then powered up without disrupting the operation of other virtual interfaces. The object is relevant when the admin state of the interface is active as set by the dot3MpcpAdminState." DEFVAL { false } ::= { dot3ExtPkgControlEntry 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.155.1.4.1.1.1.1 | dot3ExtPkgObjectReset | 0 | 0 | This object is used to reset the EPON interface. The interface may be unavailable while the reset occurs and data may be lost. Se… |
| 1.3.6.1.2.1.155.1.4.1.1.1.3 | dot3ExtPkgObjectNumberOfLLIDs | 0 | 0 | A read only object that indicates the number of registered LLIDs. The initialization value is 0. This object is applicable for a… |
| 1.3.6.1.2.1.155.1.4.1.1.1.4 | dot3ExtPkgObjectFecEnabled | 0 | 0 | An object defining the FEC mode of operation of the interface, and indicating its state. The modes defined in this object are ex… |
| 1.3.6.1.2.1.155.1.4.1.1.1.5 | dot3ExtPkgObjectReportMaximumNumQueues | 0 | 0 | An object, that defines the maximal number of queues in the REPORT message as defined in [802.3ah], clause 64. For further infor… |
| 1.3.6.1.2.1.155.1.4.1.1.1.6 | dot3ExtPkgObjectRegisterAction | 0 | 0 | An object configuring the registration state of an interface, and indicating its registration state. Write operation changes the … |