dot3ExtPkgObjectRegisterAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
register(2),
deregister(3),
reregister(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An object configuring the registration state of an
interface, and indicating its registration state.
Write operation changes the registration state to its new
value.
Read operation returns the value of the state.
The registration state is reflected in this object and in
the dot3MpcpRegistrationState object.
none(1) indicates an unknown state,
register(2) indicates a registered LLID,
deregister(3) indicates a deregistered LLID,
reregister(4) indicates an LLID that is reregistering.
The following list describes the operation of the
interface, as specified in the [802.3ah], when a write
operation is setting a value.
none(1) - not doing any action.
register(2) - registering an LLID that has been requested
for registration (The LLID is in registering mode.
dot3MpcpRegistrationState - registering(2) ).
deregister(3) - deregisters an LLID that is registered
(dot3MpcpRegistrationState - registered(3) ).
reregister(4) - reregister an LLID that is registered
(dot3MpcpRegistrationState - registered(3) ).
The behavior of an ONU and OLT interfaces, at each one
of the detailed operation at each state, is described in
the registration state machine of figure 64-22,
[802.3ah].
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface.
The write operation is not restricted in this document
and can be done at any time. Changing
dot3ExtPkgObjectRegisterAction state can lead to a change
in the registration state of the respective interface
leading to a deregistration and an interruption of
service of the users connected to the respective EPON
interface."
DEFVAL { none }
View at oid-info.com
An object configuring the registration state of an
interface, and indicating its registration state.
Write operation changes the registration state to its new
value.
Read operation returns the value of the state.
The registration state is reflected in this object and in
the dot3MpcpRegistrationState object.
none(1) indicates an unknown state,
register(2) indicates a registered LLID,
deregister(3) indicates a deregistered LLID,
reregister(4) indicates an LLID that is reregistering.
The following list describes the operation of the
interface, as specified in the [802.3ah], when a write
operation is setting a value.
none(1) - not doing any action.
register(2) - registering an LLID that has been requested
for registration (The LLID is in registering mode.
dot3MpcpRegistrationState - registering(2) ).
deregister(3) - deregisters an LLID that is registered
(dot3MpcpRegistrationState - registered(3) ).
reregister(4) - reregister an LLID that is registered
(dot3MpcpRegistrationState - registered(3) ).
The behavior of an ONU and OLT interfaces, at each one
of the detailed operation at each state, is described in
the registration state machine of figure 64-22,
[802.3ah].
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface.
The write operation is not restricted in this document
and can be done at any time. Changing
dot3ExtPkgObjectRegisterAction state can lead to a change
in the registration state of the respective interface
leading to a deregistration and an interruption of
service of the users connected to the respective EPON
interface.
Parsed from file rfc4837-Ethernet-Passive-Optical-Networks-EPON.mib.txt
Company: None
Module: DOT3-EPON-MIB
An object configuring the registration state of an
interface, and indicating its registration state.
Write operation changes the registration state to its new
value.
Read operation returns the value of the state.
The registration state is reflected in this object and in
the dot3MpcpRegistrationState object.
none(1) indicates an unknown state,
register(2) indicates a registered LLID,
deregister(3) indicates a deregistered LLID,
reregister(4) indicates an LLID that is reregistering.
The following list describes the operation of the
interface, as specified in the [802.3ah], when a write
operation is setting a value.
none(1) - not doing any action.
register(2) - registering an LLID that has been requested
for registration (The LLID is in registering mode.
dot3MpcpRegistrationState - registering(2) ).
deregister(3) - deregisters an LLID that is registered
(dot3MpcpRegistrationState - registered(3) ).
reregister(4) - reregister an LLID that is registered
(dot3MpcpRegistrationState - registered(3) ).
The behavior of an ONU and OLT interfaces, at each one
of the detailed operation at each state, is described in
the registration state machine of figure 64-22,
[802.3ah].
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface.
The write operation is not restricted in this document
and can be done at any time. Changing
dot3ExtPkgObjectRegisterAction state can lead to a change
in the registration state of the respective interface
leading to a deregistration and an interruption of
service of the users connected to the respective EPON
interface.
Parsed from file DOT3-EPON-MIB.mib
Module: DOT3-EPON-MIB
Automatically extracted from RFC4837
dot3ExtPkgObjectRegisterAction OBJECT-TYPE SYNTAX INTEGER { none(1), register(2), deregister(3), reregister(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "An object configuring the registration state of an interface, and indicating its registration state. Write operation changes the registration state to its new value. Read operation returns the value of the state. The registration state is reflected in this object and in the dot3MpcpRegistrationState object. none(1) indicates an unknown state, register(2) indicates a registered LLID, deregister(3) indicates a deregistered LLID, reregister(4) indicates an LLID that is reregistering. The following list describes the operation of the interface, as specified in the [802.3ah], when a write operation is setting a value. none(1) - not doing any action. register(2) - registering an LLID that has been requested for registration (The LLID is in registering mode. dot3MpcpRegistrationState - registering(2) ). deregister(3) - deregisters an LLID that is registered (dot3MpcpRegistrationState - registered(3) ). reregister(4) - reregister an LLID that is registered (dot3MpcpRegistrationState - registered(3) ). The behavior of an ONU and OLT interfaces, at each one of the detailed operation at each state, is described in the registration state machine of figure 64-22, [802.3ah]. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface. The write operation is not restricted in this document and can be done at any time. Changing dot3ExtPkgObjectRegisterAction state can lead to a change in the registration state of the respective interface leading to a deregistration and an interruption of service of the users connected to the respective EPON interface." DEFVAL { none } ::= { dot3ExtPkgControlEntry 6 }
dot3ExtPkgObjectRegisterAction OBJECT-TYPE SYNTAX INTEGER { none(1), register(2), deregister(3), reregister(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "An object configuring the registration state of an interface, and indicating its registration state. Write operation changes the registration state to its new value. Read operation returns the value of the state. The registration state is reflected in this object and in the dot3MpcpRegistrationState object. none(1) indicates an unknown state, register(2) indicates a registered LLID, deregister(3) indicates a deregistered LLID, reregister(4) indicates an LLID that is reregistering. The following list describes the operation of the interface, as specified in the [802.3ah], when a write operation is setting a value. none(1) - not doing any action. register(2) - registering an LLID that has been requested for registration (The LLID is in registering mode. dot3MpcpRegistrationState - registering(2) ). deregister(3) - deregisters an LLID that is registered (dot3MpcpRegistrationState - registered(3) ). reregister(4) - reregister an LLID that is registered (dot3MpcpRegistrationState - registered(3) ). The behavior of an ONU and OLT interfaces, at each one of the detailed operation at each state, is described in the registration state machine of figure 64-22, [802.3ah]. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface. The write operation is not restricted in this document and can be done at any time. Changing dot3ExtPkgObjectRegisterAction state can lead to a change in the registration state of the respective interface leading to a deregistration and an interruption of service of the users connected to the respective EPON interface." DEFVAL { none } ::= { dot3ExtPkgControlEntry 6 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.155.1.4.1.1.1.1 | dot3ExtPkgObjectReset | 0 | 0 | This object is used to reset the EPON interface. The interface may be unavailable while the reset occurs and data may be lost. Se… |
1.3.6.1.2.1.155.1.4.1.1.1.2 | dot3ExtPkgObjectPowerDown | 0 | 0 | This object is used to power down the EPON interface. The interface may be unavailable while the power down occurs and data may b… |
1.3.6.1.2.1.155.1.4.1.1.1.3 | dot3ExtPkgObjectNumberOfLLIDs | 0 | 0 | A read only object that indicates the number of registered LLIDs. The initialization value is 0. This object is applicable for a… |
1.3.6.1.2.1.155.1.4.1.1.1.4 | dot3ExtPkgObjectFecEnabled | 0 | 0 | An object defining the FEC mode of operation of the interface, and indicating its state. The modes defined in this object are ex… |
1.3.6.1.2.1.155.1.4.1.1.1.5 | dot3ExtPkgObjectReportMaximumNumQueues | 0 | 0 | An object, that defines the maximal number of queues in the REPORT message as defined in [802.3ah], clause 64. For further infor… |