Reference record for OID 1.3.6.1.2.1.158

parent

1.3.6.1.2.1 (mib-2, mib)

node code

158

node name

dot3OamMIB

dot oid

1.3.6.1.2.1.158

type

MODULE-IDENTITY

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) dot3OamMIB(158)}

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) dot3OamMIB(158)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) dot3OamMIB(158)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) dot3OamMIB(158)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) dot3OamMIB(158)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) dot3OamMIB(158)}

iri oid

/iso/identified-organization/dod/internet/mgmt/mib-2/dot3OamMIB

/iso/identified-organization/dod/internet/mgmt/mib/dot3OamMIB

/iso/org/dod/internet/mgmt/mib-2/dot3OamMIB

/iso/org/dod/internet/mgmt/mib/dot3OamMIB

/iso/iso-identified-organization/dod/internet/mgmt/mib-2/dot3OamMIB

/iso/iso-identified-organization/dod/internet/mgmt/mib/dot3OamMIB

iri by oid_info

/ISO/Identified-Organization/6/1/2/1/158

Description by oid_info

dot3OamMIB MODULE-IDENTITY
LAST-UPDATED "200706140000Z" -- June 14,2007"
ORGANIZATION
"IETF Ethernet Interfaces and Hub MIB Working Group"
CONTACT-INFO
"WG Charter:
https://datatracker.ietf.org/wg/hubmib/charter/
Mailing lists:
General Discussion: [email protected]
To Subscribe: [email protected]
In Body: subscribe your_email_address
Chair: Bert Wijnen
Alcatel-Lucent
Email: bwijnen at alcatel-lucent dot com
Editor: Matt Squire
Hatteras Networks
E-mail: msquire at hatterasnetworks dot com
"
DESCRIPTION
"The MIB module for managing the new Ethernet OAM features
introduced by the Ethernet in the First Mile taskforce (IEEE
802.3ah). The functionality presented here is based on IEEE
802.3ah [802.3ah], released in October, 2004. [802.3ah] was
prepared as an addendum to the standing version of IEEE 802.3
[802.3-2002]. Since then, [802.3ah] has been
merged into the base IEEE 802.3 specification in [802.3-2005].
In particular, this MIB focuses on the new OAM functions
introduced in Clause 57 of [802.3ah]. The OAM functionality
of Clause 57 is controlled by new management attributes
introduced in Clause 30 of [802.3ah]. The OAM functions are
not specific to any particular Ethernet physical layer, and
can be generically applied to any Ethernet interface of
[802.3-2002].
An Ethernet OAM protocol data unit is a valid Ethernet frame
with a destination MAC address equal to the reserved MAC
address for Slow Protocols (See 43B of [802.3ah]), a
lengthOrType field equal to the reserved type for Slow
Protocols, and a Slow Protocols subtype equal to that of the
subtype reserved for Ethernet OAM. OAMPDU is used throughout
this document as an abbreviation for Ethernet OAM protocol
data unit.
The following reference is used throughout this MIB module:
[802.3ah] refers to:
IEEE Std 802.3ah-2004: \Draft amendment to -
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements - Part
3: Carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications
- Media Access Control Parameters, Physical Layers and
Management Parameters for subscriber access networks\,
October 2004.
[802.3-2002] refers to:
IEEE Std 802.3-2002:
\Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements - Part
3: Carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications
- Media Access Control Parameters, Physical Layers and
Management Parameters for subscriber access networks\,
March 2002.
[802.3-2005] refers to:
IEEE Std 802.3-2005:
\Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements - Part
3: Carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications
- Media Access Control Parameters, Physical Layers and
Management Parameters for subscriber access networks\,
December 2005.
[802-2001] refers to:
\IEEE Standard for LAN/MAN (Local Area
Network/Metropolitan Area Network): Overview and
Architecture\, IEEE 802, June 2001.
Copyright (c) The IETF Trust (2007). This version of
this MIB module is part of RFC 4878; See the RFC itself for
full legal notices. "
REVISION "200706140000Z" -- June 14, 2007"
DESCRIPTION "Initial version, published as RFC 4878."
View at oid-info.com

Description by mibdepot

The MIB module for managing the new Ethernet OAM features
introduced by the Ethernet in the First Mile taskforce (IEEE
802.3ah). The functionality presented here is based on IEEE
802.3ah [802.3ah], released in October, 2004. [802.3ah] was
prepared as an addendum to the standing version of IEEE 802.3
[802.3-2002]. Since then, [802.3ah] has been
merged into the base IEEE 802.3 specification in [802.3-2005].

In particular, this MIB focuses on the new OAM functions
introduced in Clause 57 of [802.3ah]. The OAM functionality
of Clause 57 is controlled by new management attributes
introduced in Clause 30 of [802.3ah]. The OAM functions are
not specific to any particular Ethernet physical layer, and
can be generically applied to any Ethernet interface of
[802.3-2002].

An Ethernet OAM protocol data unit is a valid Ethernet frame
with a destination MAC address equal to the reserved MAC
address for Slow Protocols (See 43B of [802.3ah]), a
lengthOrType field equal to the reserved type for Slow
Protocols, and a Slow Protocols subtype equal to that of the
subtype reserved for Ethernet OAM. OAMPDU is used throughout
this document as an abbreviation for Ethernet OAM protocol
data unit.

The following reference is used throughout this MIB module:

[802.3ah] refers to:
IEEE Std 802.3ah-2004: 'Draft amendment to -
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements - Part
3: Carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications
- Media Access Control Parameters, Physical Layers and
Management Parameters for subscriber access networks',
October 2004.

[802.3-2002] refers to:
IEEE Std 802.3-2002:
'Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements - Part
3: Carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications
- Media Access Control Parameters, Physical Layers and
Management Parameters for subscriber access networks',
March 2002.

[802.3-2005] refers to:
IEEE Std 802.3-2005:
'Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements - Part
3: Carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications
- Media Access Control Parameters, Physical Layers and
Management Parameters for subscriber access networks',
December 2005.

[802-2001] refers to:
'IEEE Standard for LAN/MAN (Local Area
Network/Metropolitan Area Network): Overview and
Architecture', IEEE 802, June 2001.

Copyright (c) The IETF Trust (2007). This version of
this MIB module is part of RFC 4878; See the RFC itself for
full legal notices.

Parsed from file rfc4878-OAM-Functions-on-Ethernet-Like-Interfaces.mib.txt
Company: None
Module: DOT3-OAM-MIB

Description by circitor

The MIB module for managing the new Ethernet OAM features
introduced by the Ethernet in the First Mile taskforce (IEEE
802.3ah). The functionality presented here is based on IEEE
802.3ah [802.3ah], released in October, 2004. [802.3ah] was
prepared as an addendum to the standing version of IEEE 802.3
[802.3-2002]. Since then, [802.3ah] has been
merged into the base IEEE 802.3 specification in [802.3-2005].

In particular, this MIB focuses on the new OAM functions
introduced in Clause 57 of [802.3ah]. The OAM functionality
of Clause 57 is controlled by new management attributes
introduced in Clause 30 of [802.3ah]. The OAM functions are
not specific to any particular Ethernet physical layer, and
can be generically applied to any Ethernet interface of
[802.3-2002].

An Ethernet OAM protocol data unit is a valid Ethernet frame
with a destination MAC address equal to the reserved MAC
address for Slow Protocols (See 43B of [802.3ah]), a
lengthOrType field equal to the reserved type for Slow
Protocols, and a Slow Protocols subtype equal to that of the
subtype reserved for Ethernet OAM. OAMPDU is used throughout
this document as an abbreviation for Ethernet OAM protocol
data unit.

The following reference is used throughout this MIB module:

[802.3ah] refers to:
IEEE Std 802.3ah-2004: 'Draft amendment to -
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements - Part
3: Carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications
- Media Access Control Parameters, Physical Layers and
Management Parameters for subscriber access networks',
October 2004.

[802.3-2002] refers to:
IEEE Std 802.3-2002:
'Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements - Part
3: Carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications
- Media Access Control Parameters, Physical Layers and
Management Parameters for subscriber access networks',
March 2002.

[802.3-2005] refers to:
IEEE Std 802.3-2005:
'Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements - Part
3: Carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications
- Media Access Control Parameters, Physical Layers and
Management Parameters for subscriber access networks',
December 2005.

[802-2001] refers to:
'IEEE Standard for LAN/MAN (Local Area
Network/Metropolitan Area Network): Overview and
Architecture', IEEE 802, June 2001.

Copyright (c) The IETF Trust (2007). This version of
this MIB module is part of RFC 4878; See the RFC itself for
full legal notices.

Parsed from file DOT3-OAM-MIB.mib
Module: DOT3-OAM-MIB

Information by oid_info

Automatically extracted from RFC4878

Information by mibdepot

dot3OamMIB MODULE-IDENTITY
        LAST-UPDATED "200706140000Z"  
        ORGANIZATION
          "IETF Ethernet Interfaces and Hub MIB Working Group"
        CONTACT-INFO
          "WG Charter:
            http://www.ietf.org/html.charters/hubmib-charter.html
          Mailing lists:
            General Discussion: [email protected]
            To Subscribe: [email protected]
            In Body: subscribe your_email_address
          Chair: Bert Wijnen
            Alcatel-Lucent
            Email: bwijnen at alcatel-lucent dot com
          Editor: Matt Squire
            Hatteras Networks
            E-mail: msquire at hatterasnetworks dot com
          "
        DESCRIPTION
          "The MIB module for managing the new Ethernet OAM features
          introduced by the Ethernet in the First Mile taskforce (IEEE
          802.3ah).  The functionality presented here is based on IEEE
          802.3ah [802.3ah], released in October, 2004.  [802.3ah] was
          prepared as an addendum to the standing version of IEEE 802.3
          [802.3-2002].  Since then, [802.3ah] has been
          merged into the base IEEE 802.3 specification in [802.3-2005].

          In particular, this MIB focuses on the new OAM functions
          introduced in Clause 57 of [802.3ah].  The OAM functionality
          of Clause 57 is controlled by new management attributes
          introduced in Clause 30 of [802.3ah].  The OAM functions are
          not specific to any particular Ethernet physical layer, and
          can be generically applied to any Ethernet interface of
          [802.3-2002].

          An Ethernet OAM protocol data unit is a valid Ethernet frame
          with a destination MAC address equal to the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), a
          lengthOrType field equal to the reserved type for Slow
          Protocols, and a Slow Protocols subtype equal to that of the
          subtype reserved for Ethernet OAM.  OAMPDU is used throughout
          this document as an abbreviation for Ethernet OAM protocol
          data unit.

          The following reference is used throughout this MIB module:

            [802.3ah] refers to:
              IEEE Std 802.3ah-2004: 'Draft amendment to -
              Information technology - Telecommunications and
              information exchange between systems - Local and
              metropolitan area networks - Specific requirements - Part
              3: Carrier sense multiple access with collision detection
              (CSMA/CD) access method and physical layer specifications
              - Media Access Control Parameters, Physical Layers and
              Management Parameters for subscriber access networks',
              October 2004.

            [802.3-2002] refers to:
              IEEE Std 802.3-2002:
              'Information technology - Telecommunications and
              information exchange between systems - Local and
              metropolitan area networks - Specific requirements - Part
              3: Carrier sense multiple access with collision detection
              (CSMA/CD) access method and physical layer specifications
              - Media Access Control Parameters, Physical Layers and
              Management Parameters for subscriber access networks',
              March 2002.

            [802.3-2005] refers to:
              IEEE Std 802.3-2005:
              'Information technology - Telecommunications and
              information exchange between systems - Local and
              metropolitan area networks - Specific requirements - Part
              3: Carrier sense multiple access with collision detection
              (CSMA/CD) access method and physical layer specifications
              - Media Access Control Parameters, Physical Layers and
              Management Parameters for subscriber access networks',
              December 2005.

            [802-2001] refers to:
              'IEEE Standard for LAN/MAN (Local Area
              Network/Metropolitan Area Network): Overview and
              Architecture', IEEE 802, June 2001.

          Copyright (c) The IETF Trust (2007).  This version of
          this MIB module is part of RFC 4878; See the RFC itself for
          full legal notices. "

        REVISION    "200706140000Z"  
        DESCRIPTION "Initial version, published as RFC 4878."
         ::= { mib-2 158 }

Information by circitor

dot3OamMIB MODULE-IDENTITY
        LAST-UPDATED "200706140000Z"  
        ORGANIZATION
          "IETF Ethernet Interfaces and Hub MIB Working Group"
        CONTACT-INFO
          "WG Charter:
            http://www.ietf.org/html.charters/hubmib-charter.html
          Mailing lists:
            General Discussion: [email protected]
            To Subscribe: [email protected]
            In Body: subscribe your_email_address
          Chair: Bert Wijnen
            Alcatel-Lucent
            Email: bwijnen at alcatel-lucent dot com
          Editor: Matt Squire
            Hatteras Networks
            E-mail: msquire at hatterasnetworks dot com
          "
        DESCRIPTION
          "The MIB module for managing the new Ethernet OAM features
          introduced by the Ethernet in the First Mile taskforce (IEEE
          802.3ah).  The functionality presented here is based on IEEE
          802.3ah [802.3ah], released in October, 2004.  [802.3ah] was
          prepared as an addendum to the standing version of IEEE 802.3
          [802.3-2002].  Since then, [802.3ah] has been
          merged into the base IEEE 802.3 specification in [802.3-2005].

          In particular, this MIB focuses on the new OAM functions
          introduced in Clause 57 of [802.3ah].  The OAM functionality
          of Clause 57 is controlled by new management attributes
          introduced in Clause 30 of [802.3ah].  The OAM functions are
          not specific to any particular Ethernet physical layer, and
          can be generically applied to any Ethernet interface of
          [802.3-2002].

          An Ethernet OAM protocol data unit is a valid Ethernet frame
          with a destination MAC address equal to the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), a
          lengthOrType field equal to the reserved type for Slow
          Protocols, and a Slow Protocols subtype equal to that of the
          subtype reserved for Ethernet OAM.  OAMPDU is used throughout
          this document as an abbreviation for Ethernet OAM protocol
          data unit.

          The following reference is used throughout this MIB module:

            [802.3ah] refers to:
              IEEE Std 802.3ah-2004: 'Draft amendment to -
              Information technology - Telecommunications and
              information exchange between systems - Local and
              metropolitan area networks - Specific requirements - Part
              3: Carrier sense multiple access with collision detection
              (CSMA/CD) access method and physical layer specifications
              - Media Access Control Parameters, Physical Layers and
              Management Parameters for subscriber access networks',
              October 2004.

            [802.3-2002] refers to:
              IEEE Std 802.3-2002:
              'Information technology - Telecommunications and
              information exchange between systems - Local and
              metropolitan area networks - Specific requirements - Part
              3: Carrier sense multiple access with collision detection
              (CSMA/CD) access method and physical layer specifications
              - Media Access Control Parameters, Physical Layers and
              Management Parameters for subscriber access networks',
              March 2002.

            [802.3-2005] refers to:
              IEEE Std 802.3-2005:
              'Information technology - Telecommunications and
              information exchange between systems - Local and
              metropolitan area networks - Specific requirements - Part
              3: Carrier sense multiple access with collision detection
              (CSMA/CD) access method and physical layer specifications
              - Media Access Control Parameters, Physical Layers and
              Management Parameters for subscriber access networks',
              December 2005.

            [802-2001] refers to:
              'IEEE Standard for LAN/MAN (Local Area
              Network/Metropolitan Area Network): Overview and
              Architecture', IEEE 802, June 2001.

          Copyright (c) The IETF Trust (2007).  This version of
          this MIB module is part of RFC 4878; See the RFC itself for
          full legal notices. "

        REVISION    "200706140000Z"  
        DESCRIPTION "Initial version, published as RFC 4878."
         ::= { mib-2 158 }

First Registration Authority (recovered by parent 1.3.6)

Defense Communication Agency

Current Registration Authority (recovered by parent 1.3.6.1.2)

Internet Assigned Numbers Authority

Children (3)

Brothers (248)

To many brothers! Only 100 nearest brothers are shown.