t11ZoneServerMIB MODULE-IDENTITY
LAST-UPDATED "200706270000Z"
ORGANIZATION "For the initial versions, T11.
For later versions, the IETF\s IMSS Working Group."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: [email protected]
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: [email protected]"
DESCRIPTION
"The MIB module for the management of Fibre Channel Zoning
Servers, both for Basic Zoning Management and for Enhanced
Zoning Management, as defined in the FC-GS-5 specification.
FC-GS-5 defines (in-band) management operations for
manipulating the Zone Set Database, some for use in Basic
mode (e.g., \Add Zone Set (AZS)\, etc.), and some for use in
Enhanced mode (e.g., Create Zone Set (CZS)\, etc.). When
Enhanced Zoning Management is in use, FC-GS-5 requires that
these in-band management operations be rejected unless they
are issued within the context of a GS-5 server session. The
use of a server session ensures serialized access to the
Zoning Database since the Fabric lock for the Zone Server
must be obtained as a part of establishing the server
session to the Zone Server.
Thus, if and when this MIB is used for Enhanced Zoning
Management, SNMP SetRequests that request the modification
of zoning definitions must be serialized with respect to
the GS-5 requests to modify the Zoning Database. This is
achieved by requiring that an SNMP management application
must first obtain the Fabric lock for the Zone Server
before attempting to modify any zoning definitions. The
companion T11-FC-FABRIC-LOCK-MIB module is defined as a means
of obtaining the Fabric lock for the Zone Server (or any
other server).
In Enhanced Zoning Management, a Zone Server keeps track of
changes requested in the zoning definitions, but does not
update its Zone Set Database unless there is (and until
there is) a \commit\ operation. To model this behavior,
this MIB module assumes that a Zone Server (in Enhanced
mode) takes a snapshot of its Zone Set Database as and when
the Fabric lock (for the Zone Server application) is
obtained; this snapshot is used to create what is herein
called the \copy\ database. It is this \copy\ database
that is then updated by SNMP SetRequests (while the Fabric
is locked). If and when a \commit\ operation is requested
(while the Fabric is still locked), the \copy\ database is
then used to overwrite the previously committed contents of
the Zone Set Database, and the new Zone Set Database is
distributed to all other switches in the Fabric. When the
lock is released, any changes made that were not
\committed\ are discarded.
When this MIB is used for Basic Zoning Management, the same
set of MIB objects as used for Enhanced mode are used to
make changes to the Database of a Zone Server on a
particular switch, but the changes take immediate effect at
that switch without an explicit commit. The distribution of
those changes to Zone Servers on other switches in the
Fabric is subsequently requested through the use of a
separate set of MIB objects.
The management information specified in this MIB module
includes the Zoning Database for each of one or more Fibre
Channel Fabrics. A Zoning Database is a combination of the
Fabric\s Zone Set Database and its Active Zone Set. The
Active Zone Set is the Zone Set currently enforced by the
Fabric; a Zone Set Database is a database of the Zone Sets
available to be activated within a Fabric. All the MIB
objects representing a Zone Set Database are modifiable at
any time (irrespective of the value of any RowStatus
object), whereas all objects representing the Active Zone
Set are always read-only (except to deactivate it and/or
activate a different one).
Copyright (C) The IETF Trust (2007). This version
of this MIB module is part of RFC 4936; see the RFC
itself for full legal notices."
REVISION "200706270000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 4936."
View at oid-info.com
The MIB module for the management of Fibre Channel Zoning
Servers, both for Basic Zoning Management and for Enhanced
Zoning Management, as defined in the FC-GS-5 specification.
FC-GS-5 defines (in-band) management operations for
manipulating the Zone Set Database, some for use in Basic
mode (e.g., 'Add Zone Set (AZS)', etc.), and some for use in
Enhanced mode (e.g., Create Zone Set (CZS)', etc.). When
Enhanced Zoning Management is in use, FC-GS-5 requires that
these in-band management operations be rejected unless they
are issued within the context of a GS-5 server session. The
use of a server session ensures serialized access to the
Zoning Database since the Fabric lock for the Zone Server
must be obtained as a part of establishing the server
session to the Zone Server.
Thus, if and when this MIB is used for Enhanced Zoning
Management, SNMP SetRequests that request the modification
of zoning definitions must be serialized with respect to
the GS-5 requests to modify the Zoning Database. This is
achieved by requiring that an SNMP management application
must first obtain the Fabric lock for the Zone Server
before attempting to modify any zoning definitions. The
companion T11-FC-FABRIC-LOCK-MIB module is defined as a means
of obtaining the Fabric lock for the Zone Server (or any
other server).
In Enhanced Zoning Management, a Zone Server keeps track of
changes requested in the zoning definitions, but does not
update its Zone Set Database unless there is (and until
there is) a 'commit' operation. To model this behavior,
this MIB module assumes that a Zone Server (in Enhanced
mode) takes a snapshot of its Zone Set Database as and when
the Fabric lock (for the Zone Server application) is
obtained; this snapshot is used to create what is herein
called the 'copy' database. It is this 'copy' database
that is then updated by SNMP SetRequests (while the Fabric
is locked). If and when a 'commit' operation is requested
(while the Fabric is still locked), the 'copy' database is
then used to overwrite the previously committed contents of
the Zone Set Database, and the new Zone Set Database is
distributed to all other switches in the Fabric. When the
lock is released, any changes made that were not
'committed' are discarded.
When this MIB is used for Basic Zoning Management, the same
set of MIB objects as used for Enhanced mode are used to
make changes to the Database of a Zone Server on a
particular switch, but the changes take immediate effect at
that switch without an explicit commit. The distribution of
those changes to Zone Servers on other switches in the
Fabric is subsequently requested through the use of a
separate set of MIB objects.
The management information specified in this MIB module
includes the Zoning Database for each of one or more Fibre
Channel Fabrics. A Zoning Database is a combination of the
Fabric's Zone Set Database and its Active Zone Set. The
Active Zone Set is the Zone Set currently enforced by the
Fabric; a Zone Set Database is a database of the Zone Sets
available to be activated within a Fabric. All the MIB
objects representing a Zone Set Database are modifiable at
any time (irrespective of the value of any RowStatus
object), whereas all objects representing the Active Zone
Set are always read-only (except to deactivate it and/or
activate a different one).
Copyright (C) The IETF Trust (2007). This version
of this MIB module is part of RFC 4936; see the RFC
itself for full legal notices.
Parsed from file rfc4936-Fibre-Channel-Zone-Server.mib-2.txt
Company: None
Module: T11-FC-ZONE-SERVER-MIB
The MIB module for the management of Fibre Channel Zoning
Servers, both for Basic Zoning Management and for Enhanced
Zoning Management, as defined in the FC-GS-5 specification.
FC-GS-5 defines (in-band) management operations for
manipulating the Zone Set Database, some for use in Basic
mode (e.g., 'Add Zone Set (AZS)', etc.), and some for use in
Enhanced mode (e.g., Create Zone Set (CZS)', etc.). When
Enhanced Zoning Management is in use, FC-GS-5 requires that
these in-band management operations be rejected unless they
are issued within the context of a GS-5 server session. The
use of a server session ensures serialized access to the
Zoning Database since the Fabric lock for the Zone Server
must be obtained as a part of establishing the server
session to the Zone Server.
Thus, if and when this MIB is used for Enhanced Zoning
Management, SNMP SetRequests that request the modification
of zoning definitions must be serialized with respect to
the GS-5 requests to modify the Zoning Database. This is
achieved by requiring that an SNMP management application
must first obtain the Fabric lock for the Zone Server
before attempting to modify any zoning definitions. The
companion T11-FC-FABRIC-LOCK-MIB module is defined as a means
of obtaining the Fabric lock for the Zone Server (or any
other server).
In Enhanced Zoning Management, a Zone Server keeps track of
changes requested in the zoning definitions, but does not
update its Zone Set Database unless there is (and until
there is) a 'commit' operation. To model this behavior,
this MIB module assumes that a Zone Server (in Enhanced
mode) takes a snapshot of its Zone Set Database as and when
the Fabric lock (for the Zone Server application) is
obtained; this snapshot is used to create what is herein
called the 'copy' database. It is this 'copy' database
that is then updated by SNMP SetRequests (while the Fabric
is locked). If and when a 'commit' operation is requested
(while the Fabric is still locked), the 'copy' database is
then used to overwrite the previously committed contents of
the Zone Set Database, and the new Zone Set Database is
distributed to all other switches in the Fabric. When the
lock is released, any changes made that were not
'committed' are discarded.
When this MIB is used for Basic Zoning Management, the same
set of MIB objects as used for Enhanced mode are used to
make changes to the Database of a Zone Server on a
particular switch, but the changes take immediate effect at
that switch without an explicit commit. The distribution of
those changes to Zone Servers on other switches in the
Fabric is subsequently requested through the use of a
separate set of MIB objects.
The management information specified in this MIB module
includes the Zoning Database for each of one or more Fibre
Channel Fabrics. A Zoning Database is a combination of the
Fabric's Zone Set Database and its Active Zone Set. The
Active Zone Set is the Zone Set currently enforced by the
Fabric; a Zone Set Database is a database of the Zone Sets
available to be activated within a Fabric. All the MIB
objects representing a Zone Set Database are modifiable at
any time (irrespective of the value of any RowStatus
object), whereas all objects representing the Active Zone
Set are always read-only (except to deactivate it and/or
activate a different one).
Copyright (C) The IETF Trust (2007). This version
of this MIB module is part of RFC 4936; see the RFC
itself for full legal notices.
Parsed from file T11-FC-ZONE-SERVER-MIB.mib
Module: T11-FC-ZONE-SERVER-MIB
Automatically extracted from RFC4936
t11ZoneServerMIB MODULE-IDENTITY LAST-UPDATED "200706270000Z" ORGANIZATION "For the initial versions, T11. For later versions, the IETF's IMSS Working Group." CONTACT-INFO " Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: [email protected] Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: [email protected]" DESCRIPTION "The MIB module for the management of Fibre Channel Zoning Servers, both for Basic Zoning Management and for Enhanced Zoning Management, as defined in the FC-GS-5 specification. FC-GS-5 defines (in-band) management operations for manipulating the Zone Set Database, some for use in Basic mode (e.g., 'Add Zone Set (AZS)', etc.), and some for use in Enhanced mode (e.g., Create Zone Set (CZS)', etc.). When Enhanced Zoning Management is in use, FC-GS-5 requires that these in-band management operations be rejected unless they are issued within the context of a GS-5 server session. The use of a server session ensures serialized access to the Zoning Database since the Fabric lock for the Zone Server must be obtained as a part of establishing the server session to the Zone Server. Thus, if and when this MIB is used for Enhanced Zoning Management, SNMP SetRequests that request the modification of zoning definitions must be serialized with respect to the GS-5 requests to modify the Zoning Database. This is achieved by requiring that an SNMP management application must first obtain the Fabric lock for the Zone Server before attempting to modify any zoning definitions. The companion T11-FC-FABRIC-LOCK-MIB module is defined as a means of obtaining the Fabric lock for the Zone Server (or any other server). In Enhanced Zoning Management, a Zone Server keeps track of changes requested in the zoning definitions, but does not update its Zone Set Database unless there is (and until there is) a 'commit' operation. To model this behavior, this MIB module assumes that a Zone Server (in Enhanced mode) takes a snapshot of its Zone Set Database as and when the Fabric lock (for the Zone Server application) is obtained; this snapshot is used to create what is herein called the 'copy' database. It is this 'copy' database that is then updated by SNMP SetRequests (while the Fabric is locked). If and when a 'commit' operation is requested (while the Fabric is still locked), the 'copy' database is then used to overwrite the previously committed contents of the Zone Set Database, and the new Zone Set Database is distributed to all other switches in the Fabric. When the lock is released, any changes made that were not 'committed' are discarded. When this MIB is used for Basic Zoning Management, the same set of MIB objects as used for Enhanced mode are used to make changes to the Database of a Zone Server on a particular switch, but the changes take immediate effect at that switch without an explicit commit. The distribution of those changes to Zone Servers on other switches in the Fabric is subsequently requested through the use of a separate set of MIB objects. The management information specified in this MIB module includes the Zoning Database for each of one or more Fibre Channel Fabrics. A Zoning Database is a combination of the Fabric's Zone Set Database and its Active Zone Set. The Active Zone Set is the Zone Set currently enforced by the Fabric; a Zone Set Database is a database of the Zone Sets available to be activated within a Fabric. All the MIB objects representing a Zone Set Database are modifiable at any time (irrespective of the value of any RowStatus object), whereas all objects representing the Active Zone Set are always read-only (except to deactivate it and/or activate a different one). Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4936; see the RFC itself for full legal notices." REVISION "200706270000Z" DESCRIPTION "Initial version of this MIB module, published as RFC 4936." ::= { mib-2 160 }
t11ZoneServerMIB MODULE-IDENTITY LAST-UPDATED "200706270000Z" ORGANIZATION "For the initial versions, T11. For later versions, the IETF's IMSS Working Group." CONTACT-INFO " Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: [email protected] Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: [email protected]" DESCRIPTION "The MIB module for the management of Fibre Channel Zoning Servers, both for Basic Zoning Management and for Enhanced Zoning Management, as defined in the FC-GS-5 specification. FC-GS-5 defines (in-band) management operations for manipulating the Zone Set Database, some for use in Basic mode (e.g., 'Add Zone Set (AZS)', etc.), and some for use in Enhanced mode (e.g., Create Zone Set (CZS)', etc.). When Enhanced Zoning Management is in use, FC-GS-5 requires that these in-band management operations be rejected unless they are issued within the context of a GS-5 server session. The use of a server session ensures serialized access to the Zoning Database since the Fabric lock for the Zone Server must be obtained as a part of establishing the server session to the Zone Server. Thus, if and when this MIB is used for Enhanced Zoning Management, SNMP SetRequests that request the modification of zoning definitions must be serialized with respect to the GS-5 requests to modify the Zoning Database. This is achieved by requiring that an SNMP management application must first obtain the Fabric lock for the Zone Server before attempting to modify any zoning definitions. The companion T11-FC-FABRIC-LOCK-MIB module is defined as a means of obtaining the Fabric lock for the Zone Server (or any other server). In Enhanced Zoning Management, a Zone Server keeps track of changes requested in the zoning definitions, but does not update its Zone Set Database unless there is (and until there is) a 'commit' operation. To model this behavior, this MIB module assumes that a Zone Server (in Enhanced mode) takes a snapshot of its Zone Set Database as and when the Fabric lock (for the Zone Server application) is obtained; this snapshot is used to create what is herein called the 'copy' database. It is this 'copy' database that is then updated by SNMP SetRequests (while the Fabric is locked). If and when a 'commit' operation is requested (while the Fabric is still locked), the 'copy' database is then used to overwrite the previously committed contents of the Zone Set Database, and the new Zone Set Database is distributed to all other switches in the Fabric. When the lock is released, any changes made that were not 'committed' are discarded. When this MIB is used for Basic Zoning Management, the same set of MIB objects as used for Enhanced mode are used to make changes to the Database of a Zone Server on a particular switch, but the changes take immediate effect at that switch without an explicit commit. The distribution of those changes to Zone Servers on other switches in the Fabric is subsequently requested through the use of a separate set of MIB objects. The management information specified in this MIB module includes the Zoning Database for each of one or more Fibre Channel Fabrics. A Zoning Database is a combination of the Fabric's Zone Set Database and its Active Zone Set. The Active Zone Set is the Zone Set currently enforced by the Fabric; a Zone Set Database is a database of the Zone Sets available to be activated within a Fabric. All the MIB objects representing a Zone Set Database are modifiable at any time (irrespective of the value of any RowStatus object), whereas all objects representing the Active Zone Set are always read-only (except to deactivate it and/or activate a different one). Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4936; see the RFC itself for full legal notices." REVISION "200706270000Z" DESCRIPTION "Initial version of this MIB module, published as RFC 4936." ::= { mib-2 160 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.160.0 | t11ZsMIBNotifications | 5 | 5 | None |
1.3.6.1.2.1.160.1 | t11ZsMIBObjects | 2 | 112 | None |
1.3.6.1.2.1.160.2 | t11ZsMIBConformance | 2 | 9 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.2.1.110 | ianafinisherMIB | 0 | 0 | This MIB module defines a set of finishing-related TEXTUAL-CONVENTIONs for use in Finisher MIB (RFC 3806) and other MIBs which ne… |
1.3.6.1.2.1.111 | finisherMIB | 0 | 0 | finisherMIB MODULE-IDENTITY LAST-UPDATED "200406020000Z" ORGANIZATION "PWG IEEE/ISTO Printer Working Group" CONTACT-INFO "Harry… |
1.3.6.1.2.1.112 | rohcMIB | 2 | 68 | This MIB module defines a set of basic objects for monitoring and configuring robust header compression. The module covers inform… |
1.3.6.1.2.1.113 | rohcUncmprMIB | 2 | 12 | This MIB module defines a set of objects for monitoring and configuring RObust Header Compression (ROHC). The objects are specifi… |
1.3.6.1.2.1.114 | rohcRtpMIB | 2 | 31 | This MIB module defines a set of objects for monitoring and configuring RObust Header Compression (ROHC). The objects are specifi… |
1.3.6.1.2.1.115 | tripTC | 0 | 0 | Initial version of TRIP (Telephony Routing Over IP) MIB Textual Conventions module used by other TRIP-related MIB Modules. Copyrig… |
1.3.6.1.2.1.116 | tripMIB | 4 | 129 | The MIB module describing Telephony Routing over IP (TRIP). TRIP is a policy driven inter-administrative domain protocol for adve… |
1.3.6.1.2.1.117 | arcMibModule | 3 | 22 | The MIB module describes the objects for controlling a resource in reporting alarm conditions that it detects. Copyright (C) The … |
1.3.6.1.2.1.118 | alarmMIB | 4 | 101 | The MIB module describes a generic solution to model alarms and to store the current list of active alarms. Copyright (C) The Inte… |
1.3.6.1.2.1.119 | ianaItuAlarmNumbers | 0 | 0 | The MIB module defines the ITU Alarm textual convention for objects expected to require regular extension. Copyright (C) The Inter… |
1.3.6.1.2.1.120 | ituAlarmTc | 0 | 0 | This MIB module defines the ITU Alarm textual convention for objects not expected to require regular extension. Copyright (C) The … |
1.3.6.1.2.1.121 | ituAlarmMIB | 2 | 36 | The MIB module describes ITU Alarm information as defined in ITU Recommendation M.3100 [M.3100], X.733 [X.733] and X.736 [X.736].… |
1.3.6.1.2.1.122 | teMIB | 4 | 127 | The Traffic Engineering MIB module. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 39… |
1.3.6.1.2.1.123 | natMIB | 4 | 416 | This MIB module defines the generic managed objects for NAT. Copyright (C) The Internet Society (2013). This version of this MIB … |
1.3.6.1.2.1.124 | pmMib | 13 | 96 | The MIB module for policy-based configuration of SNMP infrastructures. Copyright (C) The Internet Society (2005). This version o… |
1.3.6.1.2.1.125 | docsSubMgt | 2 | 34 | This is the CMTS centric subscriber management MIB for DOCSIS-compliant CMTS. It provides the objects to allow a Cable Modem Ter… |
1.3.6.1.2.1.126 | docsBpi2MIB | 3 | 198 | This is the MIB module for the DOCSIS Baseline Privacy Plus Interface (BPI+) at cable modems (CMs) and cable modem termination sy… |
1.3.6.1.2.1.127 | docsIetfQosMIB | 3 | 169 | This is the management information for Quality Of Service (QOS) for DOCSIS 1.1 and 2.0. Copyright (C) The Internet Society (2006)… |
1.3.6.1.2.1.128 | ianaIppmMetricsRegistry | 1 | 84 | This module defines a registry for IP Performance Metrics. Registrations are done sequentially by IANA in the ianaIppmMetrics sub… |
1.3.6.1.2.1.129 | vpnTcMIB | 0 | 0 | This MIB contains TCs for VPNs. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4265; … |
1.3.6.1.2.1.130 | entityStateTc | 0 | 0 | This MIB defines state textual conventions. Copyright (C) The Internet Society 2005. This version of this MIB module is part of … |
1.3.6.1.2.1.131 | entityStateMIB | 3 | 18 | This MIB defines a state extension to the Entity MIB. Copyright (C) The Internet Society 2005. This version of this MIB module i… |
1.3.6.1.2.1.132 | docsDevNotifMIB | 4 | 46 | The Event Notification MIB is an extension of the CABLE DEVICE MIB. It defines various notification objects for both cable modem… |
1.3.6.1.2.1.133 | mip6MIB | 3 | 284 | The MIB module for monitoring Mobile-IPv6 entities. Copyright (C) The Internet Society 2006. This version of this MIB module is p… |
1.3.6.1.2.1.134 | rstpMIB | 3 | 8 | The Bridge MIB Extension module for managing devices that support the Rapid Spanning Tree Protocol defined by IEEE 802.1w. Copyrig… |
1.3.6.1.2.1.135 | t11FcNameServerMIB | 3 | 60 | The MIB module for the management of the functionality, which realizes the FC-GS-4 requirements for Name Server (NS). Copyright (C… |
1.3.6.1.2.1.136 | t11TcMIB | 0 | 0 | This module defines textual conventions used in T11 MIBs. Copyright (C) The Internet Society (2006). This version of this MIB mo… |
1.3.6.1.2.1.137 | t11FcFabricAddrMgrMIB | 3 | 69 | The MIB module for the Fabric Address management functionality defined by the Fibre Channel standards. For the purposes of this … |
1.3.6.1.2.1.138 | isisMIB | 3 | 370 | This document describes a management information base for the IS-IS Routing protocol, as described in ISO 10589, when it is used … |
1.3.6.1.2.1.139 | scsiMIB | 4 | 173 | The SCSI MIB Module. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4455; see the RFC… |
1.3.6.1.2.1.140 | pktcIetfMtaMib | 3 | 119 | This MIB module defines the basic management object for the Multimedia Terminal Adapter devices compliant with PacketCable and IP… |
1.3.6.1.2.1.141 | ipsAuthMibModule | 3 | 74 | The IP Storage Authorization MIB module. Copyright (C) The Internet Society (2006). This version of this MIB module is part of R… |
1.3.6.1.2.1.142 | iscsiMibModule | 4 | 233 | The iSCSI Protocol MIB module. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4544; … |
1.3.6.1.2.1.143 | t11FcFspfMIB | 3 | 75 | The MIB module for managing the Fabric Shortest Path First (FSPF) protocol. FSPF is specified in FC-SW-4. Copyright (C) The Inte… |
1.3.6.1.2.1.144 | t11FcRouteMIB | 3 | 26 | The MIB module for configuring and displaying Fibre Channel Route Information. Copyright (C) The Internet Society (2006). This v… |
1.3.6.1.2.1.145 | radiusDynAuthClientMIB | 2 | 47 | The MIB module for entities implementing the client side of the Dynamic Authorization Extensions to the Remote Authentication Dia… |
1.3.6.1.2.1.146 | radiusDynAuthServerMIB | 2 | 44 | The MIB module for entities implementing the server side of the Dynamic Authorization Extensions to the Remote Authentication Dia… |
1.3.6.1.2.1.147 | t11FcVirtualFabricMIB | 2 | 30 | This module defines management information specific to Fibre Channel Virtual Fabrics. A Virtual Fabric is a Fabric composed of p… |
1.3.6.1.2.1.148 | sipTC | 0 | 0 | Session Initiation Protocol (SIP) MIB TEXTUAL-CONVENTION module used by other SIP-related MIB Modules. Copyright (C) The IETF Tru… |
1.3.6.1.2.1.149 | sipCommonMIB | 3 | 126 | sipCommonMIB MODULE-IDENTITY LAST-UPDATED "200704200000Z" ORGANIZATION "IETF Session Initiation Protocol Working Group" CONTACT… |
1.3.6.1.2.1.150 | sipUAMIB | 2 | 14 | sipUAMIB MODULE-IDENTITY LAST-UPDATED "200704200000Z" ORGANIZATION "IETF Session Initiation Protocol Working Group" CONTACT-INF… |
1.3.6.1.2.1.151 | sipServerMIB | 2 | 58 | sipServerMIB MODULE-IDENTITY LAST-UPDATED "200704200000Z" ORGANIZATION "IETF Session Initiation Protocol Working Group" CONTACT… |
1.3.6.1.2.1.152 | ianaGmpls | 0 | 0 | Copyright (C) The IETF Trust (2007). The initial version of this MIB module was published in RFC 4802. For full legal notices s… |
1.3.6.1.2.1.153 | spdMIB | 4 | 150 | This MIB module defines configuration objects for managing IPsec Security Policies. In general, this MIB can be implemented anyw… |
1.3.6.1.2.1.154 | ianamauMIB | 0 | 0 | This MIB module defines dot3MauType OBJECT-IDENTITIES and IANAifMauListBits, IANAifMauMediaAvailable, IANAifMauAutoNegCapBits, an… |
1.3.6.1.2.1.155 | dot3EponMIB | 2 | 111 | The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Ethernet Passive Optical Network (EPON) In… |
1.3.6.1.2.1.156 | tcpEStatsMIB | 3 | 189 | Documentation of TCP Extended Performance Instrumentation variables from the Web100 project. [Web100] All of the objects in this… |
1.3.6.1.2.1.157 | pimStdMIB | 3 | 286 | The MIB module for management of PIM routers. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RF… |
1.3.6.1.2.1.158 | dot3OamMIB | 3 | 91 | The MIB module for managing the new Ethernet OAM features introduced by the Ethernet in the First Mile taskforce (IEEE 802.3ah). … |
1.3.6.1.2.1.159 | t11FabricLockMIB | 3 | 21 | The MIB module for the management of locks on a Fibre Channel Fabric. A Fibre Channel Fabric lock is used to ensure serialized a… |
1.3.6.1.2.1.161 | t11FcRscnMIB | 3 | 49 | The MIB module for the management of registrations by Nx_Ports to receive RSCNs (Registered State Change Notifications) on a Fibr… |
1.3.6.1.2.1.162 | t11FcFabricConfigServerMIB | 3 | 106 | The MIB module for the management of a Fabric Configuration Server (FCS) in a Fibre Channel (FC) network. An FCS is defined by t… |
1.3.6.1.2.1.163 | isnsMIB | 3 | 193 | This module defines management information specific to internet Storage Name Service (iSNS) management. Copyright (C) The IETF Tru… |
1.3.6.1.2.1.164 | uriTcMIB | 0 | 0 | This MIB module defines textual conventions for representing URIs, as defined by RFC 3986 STD 66. |
1.3.6.1.2.1.165 | langTagTcMIB | 0 | 0 | This MIB module defines a textual convention for representing BCP 47 language tags. |
1.3.6.1.2.1.166 | ifCapStackMIB | 2 | 12 | The objects in this MIB module are used to describe cross-connect capabilities of stacked (layered) interfaces, complementing ifS… |
1.3.6.1.2.1.167 | efmCuMIB | 2 | 120 | The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Copper (EFMCu) Interfaces 2BASE-TL and 10P… |
1.3.6.1.2.1.168 | ipMcastMIB | 2 | 120 | The MIB module for management of IP Multicast, including multicast routing, data forwarding, and data reception. Copyright (C) Th… |
1.3.6.1.2.1.169 | pktcIetfSigMib | 3 | 166 | This MIB module supplies the basic management objects for the PacketCable and IPCablecom Signaling protocols. This version of th… |
1.3.6.1.2.1.170 | udpliteMIB | 2 | 36 | The MIB module for managing UDP-Lite implementations. Copyright (C) The IETF Trust (2008). This version of this MIB module is pa… |
1.3.6.1.2.1.171 | midcomMIB | 3 | 104 | This MIB module defines a set of basic objects for configuring middleboxes, such as firewalls and network address translators, in… |
1.3.6.1.2.1.172 | pimBsrMIB | 3 | 52 | The MIB module for management of the Bootstrap Router (BSR) mechanism for PIM routers. Copyright (C) The IETF Trust (2008). This… |
1.3.6.1.2.1.173 | syslogTCMIB | 0 | 0 | The MIB module containing textual conventions for syslog messages. Copyright (c) 2009 IETF Trust and the persons identified as aut… |
1.3.6.1.2.1.174 | ianaPwe3MIB | 0 | 0 | ianaPwe3MIB MODULE-IDENTITY LAST-UPDATED "200906110000Z" -- 11 June 2009 00:00:00 GMT ORGANIZATION "IANA" CONTACT-INFO "Interne… |
1.3.6.1.2.1.175 | t11FcTcMIB | 1 | 15 | This MIB module defines Textual Conventions for use in the multiple MIB modules, which together define the instrumentation for an… |
1.3.6.1.2.1.176 | t11FcSpAuthenticationMIB | 4 | 55 | This MIB module specifies the management information required to manage the Authentication Protocols defined by Fibre Channel's F… |
1.3.6.1.2.1.177 | t11FcSpZoningMIB | 3 | 37 | This MIB module specifies the extensions to the T11-FC-ZONE-SERVER-MIB module that are necessary for the management of Fibre Chan… |
1.3.6.1.2.1.178 | t11FcSpPolicyMIB | 3 | 199 | This MIB module specifies the management information required to manage Fabric Policies as defined by Fibre Channel's FC-SP speci… |
1.3.6.1.2.1.179 | t11FcSpSaMIB | 3 | 152 | This MIB module specifies the management information required to manage Security Associations established via Fibre Channel's FC-… |
1.3.6.1.2.1.180 | pwEnetStdMIB | 2 | 22 | pwEnetStdMIB MODULE-IDENTITY LAST-UPDATED "200906150000Z" -- 15 June 2009 00:00:00 GMT ORGANIZATION "Pseudowire Edge-to-Edge Em… |
1.3.6.1.2.1.181 | pwMplsStdMIB | 3 | 47 | pwMplsStdMIB MODULE-IDENTITY LAST-UPDATED "200906120000Z" -- 12 June 2009 00:00:00 GMT ORGANIZATION "Pseudowire Emulation Edge-… |
1.3.6.1.2.1.182 | pktcIetfEventMib | 3 | 52 | pktcIetfEventMib MODULE-IDENTITY LAST-UPDATED "200903300000Z" -- 30 March 2009 ORGANIZATION "IETF IP over Cable Data Network Wo… |
1.3.6.1.2.1.183 | pwATMMIB | 3 | 86 | pwAtmMIB MODULE-IDENTITY LAST-UPDATED "200906160000Z" -- 16 June 2009 ORGANIZATION "Pseudowire Emulation Edge-to-Edge (PWE3) Wo… |
1.3.6.1.2.1.184 | nemoMIB | 3 | 101 | nemoMIB MODULE-IDENTITY LAST-UPDATED "200903100000Z" -- 10 March 2009 ORGANIZATION "IETF MEXT Working Group" CONTACT-INFO " Sri… |
1.3.6.1.2.1.185 | mgmdStdMIB | 2 | 96 | The MIB module for MGMD management. A new version of MGMD combining RFC 2933 and RFC 3019. Includes IGMPv3 and MLDv2 source filte… |
1.3.6.1.2.1.186 | pwTDMMIB | 3 | 83 | pwTDMMIB MODULE-IDENTITY LAST-UPDATED "200906150000Z" ORGANIZATION "Pseudo-Wire Emulation Edge-to-Edge (PWE3) Working Group" CO… |
1.3.6.1.2.1.187 | forcesMib | 3 | 26 | forcesMib MODULE-IDENTITY LAST-UPDATED "201003100000Z" -- March 10, 2010 ORGANIZATION "IETF Forwarding and Control Element Sepa… |
1.3.6.1.2.1.188 | pwTcStdMIB | 0 | 0 | pwTcStdMIB MODULE-IDENTITY LAST-UPDATED "200904210000Z" -- 21 April 2009 00:00:00 GMT ORGANIZATION "Pseudowire Edge-to-Edge Emu… |
1.3.6.1.2.1.189 | snmpSshtmMIB | 3 | 16 | snmpSshtmMIB MODULE-IDENTITY LAST-UPDATED "200906090000Z" ORGANIZATION "ISMS Working Group" CONTACT-INFO "WG-EMail: isms@lists.… |
1.3.6.1.2.1.190 | snmpTsmMIB | 3 | 14 | snmpTsmMIB MODULE-IDENTITY LAST-UPDATED "200906090000Z" ORGANIZATION "ISMS Working Group" CONTACT-INFO "WG-EMail: [email protected]… |
1.3.6.1.2.1.191 | ospfv3MIB | 3 | 230 | The MIB module for OSPF version 3. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights re… |
1.3.6.1.2.1.192 | syslogMsgMib | 3 | 34 | syslogMsgMib MODULE-IDENTITY LAST-UPDATED "200908130800Z" ORGANIZATION "IETF OPSAWG Working Group" CONTACT-INFO "Juergen Schoen… |
1.3.6.1.2.1.193 | ipfixMIB | 2 | 85 | ipfixMIB MODULE-IDENTITY LAST-UPDATED "201004190000Z" -- 19 April 2010 ORGANIZATION "IETF IPFIX Working Group" CONTACT-INFO "WG… |
1.3.6.1.2.1.194 | ipfixSelectorMIB | 2 | 49 | The IPFIX SELECTOR MIB module defines the standard filtering and sampling functions that can be referenced in the ipfixSelectorTa… |
1.3.6.1.2.1.195 | capwapDot11MIB | 2 | 17 | capwapDot11MIB MODULE-IDENTITY LAST-UPDATED "201004300000Z" -- 30 April 2010 ORGANIZATION "IETF Control And Provisioning of Wir… |
1.3.6.1.2.1.196 | capwapBaseMIB | 3 | 165 | capwapBaseMIB MODULE-IDENTITY LAST-UPDATED "201004300000Z" -- 30 April 2010 ORGANIZATION "IETF Control And Provisioning of Wire… |
1.3.6.1.2.1.197 | ntpSnmpMIB | 3 | 71 | The Management Information Base for NTP time entities. Copyright (c) 2010 IETF Trust and the persons identified as authors of the… |
1.3.6.1.2.1.198 | snmpTlstmMIB | 4 | 57 | snmpTlstmMIB MODULE-IDENTITY LAST-UPDATED "201107190000Z" ORGANIZATION "ISMS Working Group" CONTACT-INFO "WG-EMail: isms@lists.… |
1.3.6.1.2.1.199 | vacmAaaMIB | 2 | 12 | vacmAaaMIB MODULE-IDENTITY LAST-UPDATED "201012090000Z" -- 9 December 2010 ORGANIZATION "ISMS Working Group" CONTACT-INFO "WG-e… |
1.3.6.1.2.1.200 | pwCepStdMIB, syslogMIB | 4 | 173 | The MIB module for monitoring syslog applications. A syslog application sends and/or receives syslog messages. The reader is refe… |
1.3.6.1.2.1.201 | floatTcMIB | 0 | 0 | floatTcMIB MODULE-IDENTITY LAST-UPDATED "201107270000Z" -- July 27, 2011 ORGANIZATION "IETF OPSAWG Working Group" CONTACT-INFO … |
1.3.6.1.2.1.202 | mplsFrrGeneralMIB | 2 | 30 | mplsFrrGeneralMIB MODULE-IDENTITY LAST-UPDATED "201111030000Z" -- 03 Nov 2011 00:00:00 GMT ORGANIZATION "Multiprotocol Label Sw… |
1.3.6.1.2.1.203 | mplsFrrOne2OneMIB | 2 | 29 | mplsFrrOne2OneMIB MODULE-IDENTITY LAST-UPDATED "201111030000Z" -- 03 Nov 2011 00:00:00 GMT ORGANIZATION "Multiprotocol Label Sw… |
1.3.6.1.2.1.204 | mplsFrrFacilityMIB | 3 | 30 | mplsFrrFacilityMIB MODULE-IDENTITY LAST-UPDATED "201111030000Z" -- 03 Nov 2011 00:00:00 GMT ORGANIZATION "Multiprotocol Label S… |
1.3.6.1.2.1.205 | pmip6TCMIB | 0 | 0 | pmip6TCMIB MODULE-IDENTITY LAST-UPDATED "201205070000Z" -- 7th May, 2012 ORGANIZATION "IETF NETLMM Working Group" CONTACT-INFO … |
1.3.6.1.2.1.206 | pmip6MIB | 3 | 124 | pmip6MIB MODULE-IDENTITY LAST-UPDATED "201205070000Z" -- 7th May, 2012 ORGANIZATION "IETF NETLMM Working Group" CONTACT-INFO " … |
1.3.6.1.2.1.207 | vrrpv3MIB | 3 | 50 | vrrpv3MIB MODULE-IDENTITY LAST-UPDATED "201202130000Z" -- Feb 13, 2012 ORGANIZATION "IETF VRRP Working Group" CONTACT-INFO "WG … |
1.3.6.1.2.1.208 | g9981MIB | 2 | 56 | g9981MIB MODULE-IDENTITY LAST-UPDATED "201302200000Z" -- 20 February 2013 ORGANIZATION "IETF ADSL MIB Working Group" CONTACT-IN… |
1.3.6.1.2.1.209 | g9982MIB | 2 | 84 | g9982MIB MODULE-IDENTITY LAST-UPDATED "201302200000Z" -- 20 February 2013 ORGANIZATION "IETF ADSL MIB Working Group" CONTACT-IN… |
1.3.6.1.2.1.210 | g9983MIB | 2 | 94 | g9983MIB MODULE-IDENTITY LAST-UPDATED "201302200000Z" -- 20 February 2013 ORGANIZATION "IETF ADSL MIB Working Group" CONTACT-IN… |
... |