The DDP address used by the client of the connection.
Parsed from file SHIVA-SESS-MIB.mib
Module: SHIVA-SESS-MIB
sessDdpAddress OBJECT-TYPE SYNTAX DdpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The DDP address used by the client of the connection." ::= { sessEntry 23 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.18.3.2.1.1 | sessIdentifier | 0 | 0 | The unique serial number identifying this session. |
| 1.3.6.1.2.1.18.3.2.1.2 | sessLines | 0 | 0 | The number of physical lines in use by this session. This can be as low as 0, as when the session is suspended. |
| 1.3.6.1.2.1.18.3.2.1.3 | sessStatus | 0 | 0 | Setting this to a value puts the connection in that state. |
| 1.3.6.1.2.1.18.3.2.1.4 | sessUser | 0 | 0 | The name of the user associated with the session. This may be empty if the user has not yet authenticated. |
| 1.3.6.1.2.1.18.3.2.1.5 | sessConnect | 0 | 0 | Session connect time in minutes. |
| 1.3.6.1.2.1.18.3.2.1.6 | sessIdle | 0 | 0 | Session idle time in minutes for purposes of deciding whether to terminate session. |
| 1.3.6.1.2.1.18.3.2.1.7 | sessVirtual | 0 | 0 | If virtual, the session is subject to suspension, if normal, it will never suspend. |
| 1.3.6.1.2.1.18.3.2.1.8 | sessVirtualIdle | 0 | 0 | Session idle time in seconds for purposes of deciding whether to suspend session. |
| 1.3.6.1.2.1.18.3.2.1.9 | sessMaxVirtualIdle | 0 | 0 | Session maximum idle time limit in seconds before session will be suspended. If zero, session will never be suspended. |
| 1.3.6.1.2.1.18.3.2.1.10 | sessSuspended | 0 | 0 | Indicates whether session is connected to line, or is suspended. Can only be suspeneded if sessVirtual is virtual. |
| 1.3.6.1.2.1.18.3.2.1.11 | sessVirtualLastChange | 0 | 0 | The value of sysUpTime at the time the session last changed from connected to suspeneded, or vice-versa. |
| 1.3.6.1.2.1.18.3.2.1.12 | sessLocation | 0 | 0 | A description of the location of the session source. |
| 1.3.6.1.2.1.18.3.2.1.13 | sessActivity | 0 | 0 | An indication of the current activity type. |
| 1.3.6.1.2.1.18.3.2.1.14 | sessDescription | 0 | 0 | A description of the current activity. |
| 1.3.6.1.2.1.18.3.2.1.15 | sessMaxConnect | 0 | 0 | Session connect time limit in minutes. If zero, there is no limit. |
| 1.3.6.1.2.1.18.3.2.1.16 | sessMaxIdle | 0 | 0 | Session idle time limit in minutes. If zero, there is no limit. |
| 1.3.6.1.2.1.18.3.2.1.17 | sessPacketSize | 0 | 0 | The maximum packet sized allowed on this connection. |
| 1.3.6.1.2.1.18.3.2.1.18 | sessProtocols | 0 | 0 | The protocols used on the connection, represented as a bitmask; 0x00000001 - PPP 0x00000002 - IP 0x00000004 - IPX 0x00000008 - Apple… |
| 1.3.6.1.2.1.18.3.2.1.19 | sessIpaddr | 0 | 0 | The IP address used by the client of the connection. |
| 1.3.6.1.2.1.18.3.2.1.20 | sessIPAddrSrc | 0 | 0 | The source of the IP address for this session. The source is a function of configured IP address assignment policy. Policy is hi… |
| 1.3.6.1.2.1.18.3.2.1.21 | sessIpxNet | 0 | 0 | The IPX network number used for the connection. |
| 1.3.6.1.2.1.18.3.2.1.22 | sessIpxNode | 0 | 0 | The IPX node number used by the client of the connection. |
| 1.3.6.1.2.1.18.3.2.1.24 | sessNetbeuiAddr | 0 | 0 | The NetBEUI address used for bridging by the client of the connection. |
| 1.3.6.1.2.1.18.3.2.1.25 | sessPPPCompDecomp | 0 | 0 | The decompression protocol in use on this session. |
| 1.3.6.1.2.1.18.3.2.1.26 | sessPPPCompComp | 0 | 0 | The compression protocol in use on this session. |
| 1.3.6.1.2.1.18.3.2.1.27 | sessPPPCompDecompRatio | 0 | 0 | The average decompression ratio, multiplied by 100. A value of 200 indicates a 1:2 decompression ratio. |
| 1.3.6.1.2.1.18.3.2.1.28 | sessPPPCompCompRatio | 0 | 0 | The average compression ratio, multiplied by 100. A value of 200 indicates a 2:1 compression ratio. |
| 1.3.6.1.2.1.18.3.2.1.29 | sessPPPCompExpandedPackets | 0 | 0 | The number of packets that were sent in compressed form that were larger than they would have been had they not been compressed. … |
| 1.3.6.1.2.1.18.3.2.1.30 | sessPPPCompExpandedOctets | 0 | 0 | The total number of extra octets that were sent when packets were sent in compressed form that were larger than they would have b… |
| 1.3.6.1.2.1.18.3.2.1.31 | sessPPPCompExpandedTooBig | 0 | 0 | The number of packets that were of a compressible type, but were not sent in compressed form because the compressed version was s… |
| 1.3.6.1.2.1.18.3.2.1.32 | sessPPPCompStacSendCheck | 0 | 0 | The type of coherency check in use for Stac LZS compression on transmitted packets. If compression is not Stac LZS, will have va… |
| 1.3.6.1.2.1.18.3.2.1.33 | sessPPPCompStacRecvCheck | 0 | 0 | The type of coherency check in use for Stac LZS decompression on received packets. If decompression is not Stac LZS, will have v… |
| 1.3.6.1.2.1.18.3.2.1.34 | sessTotalConnect | 0 | 0 | Session total connect time in minutes. Time is not counted when a Virtual Connection is suspended. |
| 1.3.6.1.2.1.18.3.2.1.35 | sessPPPCompSentUncompressed | 0 | 0 | The number of packets that were sent in uncompressed so as not to cause the data to expand on the wire. |
| 1.3.6.1.2.1.18.3.2.1.36 | sessPBurstIpxNcpAccelReq | 0 | 0 | The number of IPX NCP requests received by the Powerburst accelerator Agent |
| 1.3.6.1.2.1.18.3.2.1.37 | sessPBurstIpxNcpBytesReq | 0 | 0 | The number of bytes requested in all IPX NCP requests processed by the Powerburst accelerator Agent |
| 1.3.6.1.2.1.18.3.2.1.38 | sessPBurstIpxNcpAccel | 0 | 0 | The number of IPX NCP requests that did not require data transfer due to usage of the Powerburst accelerator |
| 1.3.6.1.2.1.18.3.2.1.39 | sessPBurstIpxNcpBytes | 0 | 0 | The number of bytes that did not have to be transmitted due to usage of the Powerburst accelerator |