The number of packets that were of a compressible
type, but were not sent in compressed form because
the compressed version was so large that it
exceeded local or remote (MTU) constraints.
Happens when the overhead of the compression
header is too much more.
Parsed from file SHIVA-SESS-MIB.mib
Module: SHIVA-SESS-MIB
sessPPPCompExpandedTooBig OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that were of a compressible type, but were not sent in compressed form because the compressed version was so large that it exceeded local or remote (MTU) constraints. Happens when the overhead of the compression header is too much more." ::= { sessEntry 31 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.18.3.2.1.1 | sessIdentifier | 0 | 0 | The unique serial number identifying this session. |
1.3.6.1.2.1.18.3.2.1.2 | sessLines | 0 | 0 | The number of physical lines in use by this session. This can be as low as 0, as when the session is suspended. |
1.3.6.1.2.1.18.3.2.1.3 | sessStatus | 0 | 0 | Setting this to a value puts the connection in that state. |
1.3.6.1.2.1.18.3.2.1.4 | sessUser | 0 | 0 | The name of the user associated with the session. This may be empty if the user has not yet authenticated. |
1.3.6.1.2.1.18.3.2.1.5 | sessConnect | 0 | 0 | Session connect time in minutes. |
1.3.6.1.2.1.18.3.2.1.6 | sessIdle | 0 | 0 | Session idle time in minutes for purposes of deciding whether to terminate session. |
1.3.6.1.2.1.18.3.2.1.7 | sessVirtual | 0 | 0 | If virtual, the session is subject to suspension, if normal, it will never suspend. |
1.3.6.1.2.1.18.3.2.1.8 | sessVirtualIdle | 0 | 0 | Session idle time in seconds for purposes of deciding whether to suspend session. |
1.3.6.1.2.1.18.3.2.1.9 | sessMaxVirtualIdle | 0 | 0 | Session maximum idle time limit in seconds before session will be suspended. If zero, session will never be suspended. |
1.3.6.1.2.1.18.3.2.1.10 | sessSuspended | 0 | 0 | Indicates whether session is connected to line, or is suspended. Can only be suspeneded if sessVirtual is virtual. |
1.3.6.1.2.1.18.3.2.1.11 | sessVirtualLastChange | 0 | 0 | The value of sysUpTime at the time the session last changed from connected to suspeneded, or vice-versa. |
1.3.6.1.2.1.18.3.2.1.12 | sessLocation | 0 | 0 | A description of the location of the session source. |
1.3.6.1.2.1.18.3.2.1.13 | sessActivity | 0 | 0 | An indication of the current activity type. |
1.3.6.1.2.1.18.3.2.1.14 | sessDescription | 0 | 0 | A description of the current activity. |
1.3.6.1.2.1.18.3.2.1.15 | sessMaxConnect | 0 | 0 | Session connect time limit in minutes. If zero, there is no limit. |
1.3.6.1.2.1.18.3.2.1.16 | sessMaxIdle | 0 | 0 | Session idle time limit in minutes. If zero, there is no limit. |
1.3.6.1.2.1.18.3.2.1.17 | sessPacketSize | 0 | 0 | The maximum packet sized allowed on this connection. |
1.3.6.1.2.1.18.3.2.1.18 | sessProtocols | 0 | 0 | The protocols used on the connection, represented as a bitmask; 0x00000001 - PPP 0x00000002 - IP 0x00000004 - IPX 0x00000008 - Apple… |
1.3.6.1.2.1.18.3.2.1.19 | sessIpaddr | 0 | 0 | The IP address used by the client of the connection. |
1.3.6.1.2.1.18.3.2.1.20 | sessIPAddrSrc | 0 | 0 | The source of the IP address for this session. The source is a function of configured IP address assignment policy. Policy is hi… |
1.3.6.1.2.1.18.3.2.1.21 | sessIpxNet | 0 | 0 | The IPX network number used for the connection. |
1.3.6.1.2.1.18.3.2.1.22 | sessIpxNode | 0 | 0 | The IPX node number used by the client of the connection. |
1.3.6.1.2.1.18.3.2.1.23 | sessDdpAddress | 0 | 0 | The DDP address used by the client of the connection. |
1.3.6.1.2.1.18.3.2.1.24 | sessNetbeuiAddr | 0 | 0 | The NetBEUI address used for bridging by the client of the connection. |
1.3.6.1.2.1.18.3.2.1.25 | sessPPPCompDecomp | 0 | 0 | The decompression protocol in use on this session. |
1.3.6.1.2.1.18.3.2.1.26 | sessPPPCompComp | 0 | 0 | The compression protocol in use on this session. |
1.3.6.1.2.1.18.3.2.1.27 | sessPPPCompDecompRatio | 0 | 0 | The average decompression ratio, multiplied by 100. A value of 200 indicates a 1:2 decompression ratio. |
1.3.6.1.2.1.18.3.2.1.28 | sessPPPCompCompRatio | 0 | 0 | The average compression ratio, multiplied by 100. A value of 200 indicates a 2:1 compression ratio. |
1.3.6.1.2.1.18.3.2.1.29 | sessPPPCompExpandedPackets | 0 | 0 | The number of packets that were sent in compressed form that were larger than they would have been had they not been compressed. … |
1.3.6.1.2.1.18.3.2.1.30 | sessPPPCompExpandedOctets | 0 | 0 | The total number of extra octets that were sent when packets were sent in compressed form that were larger than they would have b… |
1.3.6.1.2.1.18.3.2.1.32 | sessPPPCompStacSendCheck | 0 | 0 | The type of coherency check in use for Stac LZS compression on transmitted packets. If compression is not Stac LZS, will have va… |
1.3.6.1.2.1.18.3.2.1.33 | sessPPPCompStacRecvCheck | 0 | 0 | The type of coherency check in use for Stac LZS decompression on received packets. If decompression is not Stac LZS, will have v… |
1.3.6.1.2.1.18.3.2.1.34 | sessTotalConnect | 0 | 0 | Session total connect time in minutes. Time is not counted when a Virtual Connection is suspended. |
1.3.6.1.2.1.18.3.2.1.35 | sessPPPCompSentUncompressed | 0 | 0 | The number of packets that were sent in uncompressed so as not to cause the data to expand on the wire. |
1.3.6.1.2.1.18.3.2.1.36 | sessPBurstIpxNcpAccelReq | 0 | 0 | The number of IPX NCP requests received by the Powerburst accelerator Agent |
1.3.6.1.2.1.18.3.2.1.37 | sessPBurstIpxNcpBytesReq | 0 | 0 | The number of bytes requested in all IPX NCP requests processed by the Powerburst accelerator Agent |
1.3.6.1.2.1.18.3.2.1.38 | sessPBurstIpxNcpAccel | 0 | 0 | The number of IPX NCP requests that did not require data transfer due to usage of the Powerburst accelerator |
1.3.6.1.2.1.18.3.2.1.39 | sessPBurstIpxNcpBytes | 0 | 0 | The number of bytes that did not have to be transmitted due to usage of the Powerburst accelerator |