charPortOutFlowState OBJECT-TYPE
SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of output flow
control on the port.
one indicates not
applicable. unknown indicates this level does not
know. stop indicates flow not allowed. go
indicates flow allowed."
View at oid-info.com
The current operational state of output flow
control on the port. 'none' indicates not
applicable. 'unknown' indicates this level does not
know. 'stop' indicates flow not allowed. 'go'
indicates flow allowed.
Parsed from file rfc1658-Character-Stream-Devices.mib.txt
Company: None
Module: CHARACTER-MIB
The current operational state of output flow
control on the port. 'none' indicates not
applicable. 'unknown' indicates this level does not
know. 'stop' indicates flow not allowed. 'go'
indicates flow allowed.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
Automatically extracted from RFC1658
charPortOutFlowState OBJECT-TYPE SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed." ::= { charPortEntry 12 }
charPortOutFlowState OBJECT-TYPE SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed." ::= { charPortEntry 12 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.19.2.1.1 | charPortIndex | 0 | 0 | A unique value for each character port, perhaps corresponding to the same value of ifIndex when the character port is associated … |
| 1.3.6.1.2.1.19.2.1.2 | charPortName | 0 | 0 | An administratively assigned name for the port, typically with some local significance. |
| 1.3.6.1.2.1.19.2.1.3 | charPortType | 0 | 0 | The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not. |
| 1.3.6.1.2.1.19.2.1.4 | charPortHardware | 0 | 0 | None |
| 1.3.6.1.2.1.19.2.1.5 | charPortReset | 0 | 0 | A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessio… |
| 1.3.6.1.2.1.19.2.1.6 | charPortAdminStatus | 0 | 0 | The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form … |
| 1.3.6.1.2.1.19.2.1.7 | charPortOperStatus | 0 | 0 | The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates i… |
| 1.3.6.1.2.1.19.2.1.8 | charPortLastChange | 0 | 0 | The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the… |
| 1.3.6.1.2.1.19.2.1.9 | charPortInFlowType | 0 | 0 | The port's type of input flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flo… |
| 1.3.6.1.2.1.19.2.1.10 | charPortOutFlowType | 0 | 0 | The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software fl… |
| 1.3.6.1.2.1.19.2.1.11 | charPortInFlowState | 0 | 0 | The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level… |
| 1.3.6.1.2.1.19.2.1.13 | charPortInCharacters | 0 | 0 | Total number of characters detected as input from the port since system re-initialization and while the port operational state wa… |
| 1.3.6.1.2.1.19.2.1.14 | charPortOutCharacters | 0 | 0 | Total number of characters detected as output to the port since system re-initialization and while the port operational state was… |
| 1.3.6.1.2.1.19.2.1.15 | charPortAdminOrigin | 0 | 0 | The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establis… |
| 1.3.6.1.2.1.19.2.1.16 | charPortSessionMaximum | 0 | 0 | The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less t… |
| 1.3.6.1.2.1.19.2.1.17 | charPortSessionNumber | 0 | 0 | The number of open sessions on the port that are in the connecting, connected, or disconnecting state. |
| 1.3.6.1.2.1.19.2.1.18 | charPortSessionIndex | 0 | 0 | The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the… |
| 1.3.6.1.2.1.19.2.1.19 | charPortInFlowTypes | 0 | 0 | The port's types of input flow control at the software level. Hardware-level flow control is independently controlled by the app… |
| 1.3.6.1.2.1.19.2.1.20 | charPortOutFlowTypes | 0 | 0 | The port's types of output flow control at the software level. Hardware-level flow control is independently controlled by the ap… |
| 1.3.6.1.2.1.19.2.1.21 | charPortLowerIfIndex | 0 | 0 | The ifIndex value of the lower level hardware supporting this character port, zero if none. |