charPortLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the port entered
its current operational state. If the current state
was entered prior to the last reinitialization of
the local network management subsystem, then this
object contains a zero value."
View at oid-info.com
The value of sysUpTime at the time the port entered
its current operational state. If the current state
was entered prior to the last reinitialization of
the local network management subsystem, then this
object contains a zero value.
Parsed from file rfc1658-Character-Stream-Devices.mib.txt
Company: None
Module: CHARACTER-MIB
The value of sysUpTime at the time the port entered
its current operational state. If the current state
was entered prior to the last reinitialization of
the local network management subsystem, then this
object contains a zero value.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
Automatically extracted from RFC1658
charPortLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the last reinitialization of the local network management subsystem, then this object contains a zero value." ::= { charPortEntry 8 }
charPortLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the last reinitialization of the local network management subsystem, then this object contains a zero value." ::= { charPortEntry 8 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.19.2.1.1 | charPortIndex | 0 | 0 | A unique value for each character port, perhaps corresponding to the same value of ifIndex when the character port is associated … |
| 1.3.6.1.2.1.19.2.1.2 | charPortName | 0 | 0 | An administratively assigned name for the port, typically with some local significance. |
| 1.3.6.1.2.1.19.2.1.3 | charPortType | 0 | 0 | The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not. |
| 1.3.6.1.2.1.19.2.1.4 | charPortHardware | 0 | 0 | None |
| 1.3.6.1.2.1.19.2.1.5 | charPortReset | 0 | 0 | A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessio… |
| 1.3.6.1.2.1.19.2.1.6 | charPortAdminStatus | 0 | 0 | The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form … |
| 1.3.6.1.2.1.19.2.1.7 | charPortOperStatus | 0 | 0 | The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates i… |
| 1.3.6.1.2.1.19.2.1.9 | charPortInFlowType | 0 | 0 | The port's type of input flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flo… |
| 1.3.6.1.2.1.19.2.1.10 | charPortOutFlowType | 0 | 0 | The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software fl… |
| 1.3.6.1.2.1.19.2.1.11 | charPortInFlowState | 0 | 0 | The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level… |
| 1.3.6.1.2.1.19.2.1.12 | charPortOutFlowState | 0 | 0 | The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this lev… |
| 1.3.6.1.2.1.19.2.1.13 | charPortInCharacters | 0 | 0 | Total number of characters detected as input from the port since system re-initialization and while the port operational state wa… |
| 1.3.6.1.2.1.19.2.1.14 | charPortOutCharacters | 0 | 0 | Total number of characters detected as output to the port since system re-initialization and while the port operational state was… |
| 1.3.6.1.2.1.19.2.1.15 | charPortAdminOrigin | 0 | 0 | The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establis… |
| 1.3.6.1.2.1.19.2.1.16 | charPortSessionMaximum | 0 | 0 | The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less t… |
| 1.3.6.1.2.1.19.2.1.17 | charPortSessionNumber | 0 | 0 | The number of open sessions on the port that are in the connecting, connected, or disconnecting state. |
| 1.3.6.1.2.1.19.2.1.18 | charPortSessionIndex | 0 | 0 | The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the… |
| 1.3.6.1.2.1.19.2.1.19 | charPortInFlowTypes | 0 | 0 | The port's types of input flow control at the software level. Hardware-level flow control is independently controlled by the app… |
| 1.3.6.1.2.1.19.2.1.20 | charPortOutFlowTypes | 0 | 0 | The port's types of output flow control at the software level. Hardware-level flow control is independently controlled by the ap… |
| 1.3.6.1.2.1.19.2.1.21 | charPortLowerIfIndex | 0 | 0 | The ifIndex value of the lower level hardware supporting this character port, zero if none. |