upsSubsetCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for UPSs that only support
the two-contact communication protocol."
MODULE -- this module
MANDATORY-GROUPS { upsSubsetIdentGroup,
upsSubsetBatteryGroup, upsSubsetInputGroup,
upsSubsetOutputGroup, upsSubsetAlarmGroup,
upsSubsetControlGroup, upsSubsetConfigGroup }
OBJECT upsBatteryStatus
SYNTAX INTEGER {
batteryNormal(2),
batteryLow(3)
}
DESCRIPTION
"Support of the values unknown(1) and
batteryDepleted(4) is not required."
OBJECT upsAlarmDescr
DESCRIPTION
"Support of all `well known alarm types is not
required. The well known alarm types which must be
supported are: upsAlarmOnBattery, upsAlarmLowBattery,
upsAlarmInputBad, upsAlarmUpsOutputOff,
upsAlarmUpsSystemOff, and upsAlarmTestInProgress."
OBJECT upsOutputSource
SYNTAX INTEGER {
normal(2),
battery(4)
}
DESCRIPTION
"Support of the values other(1), none(2), bypass(4),
booster(6) and reducer(7) is not required."
OBJECT upsShutdownType
MIN-ACCESS read-only
DESCRIPTION
"Read-write access is not required, i.e., compliant
systems need not support more than one shutdown type."
OBJECT upsAutoRestart
MIN-ACCESS read-only
DESCRIPTION
"Read-write access is not required, i.e., compliant
systems need not support more than one restart type."
OBJECT upsConfigInputVoltage
MIN-ACCESS read-only
DESCRIPTION
"Read-write access is not required."
OBJECT upsConfigInputFreq
MIN-ACCESS read-only
DESCRIPTION
"Read-write access is not required."
OBJECT upsConfigOutputVoltage
MIN-ACCESS read-only
DESCRIPTION
"Read-write access is not required."
OBJECT upsConfigOutputFreq
MIN-ACCESS read-only
DESCRIPTION
"Read-write access is not required."
View at oid-info.com
The compliance statement for UPSs that only support
the two-contact communication protocol.
Parsed from file UPS-MIB.mib
Module: UPS-MIB
Automatically extracted from RFC1628
upsSubsetCompliance OBJECT IDENTIFIER ::= { upsCompliances 1 }
upsSubsetCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for UPSs that only support the two-contact communication protocol." MODULE MANDATORY-GROUPS { upsSubsetIdentGroup, upsSubsetBatteryGroup, upsSubsetInputGroup, upsSubsetOutputGroup, upsSubsetAlarmGroup, upsSubsetControlGroup, upsSubsetConfigGroup } OBJECT upsBatteryStatus SYNTAX INTEGER { batteryNormal(2), batteryLow(3) } DESCRIPTION "Support of the values unknown(1) and batteryDepleted(4) is not required." OBJECT upsAlarmDescr DESCRIPTION "Support of all `well known' alarm types is not required. The well known alarm types which must be supported are: upsAlarmOnBattery, upsAlarmLowBattery, upsAlarmInputBad, upsAlarmUpsOutputOff, upsAlarmUpsSystemOff, and upsAlarmTestInProgress." OBJECT upsOutputSource SYNTAX INTEGER { normal(2), battery(4) } DESCRIPTION "Support of the values other(1), none(2), bypass(4), booster(6) and reducer(7) is not required." OBJECT upsShutdownType MIN-ACCESS read-only DESCRIPTION "Read-write access is not required, i.e., compliant systems need not support more than one shutdown type." OBJECT upsAutoRestart MIN-ACCESS read-only DESCRIPTION "Read-write access is not required, i.e., compliant systems need not support more than one restart type." OBJECT upsConfigInputVoltage MIN-ACCESS read-only DESCRIPTION "Read-write access is not required." OBJECT upsConfigInputFreq MIN-ACCESS read-only DESCRIPTION "Read-write access is not required." OBJECT upsConfigOutputVoltage MIN-ACCESS read-only DESCRIPTION "Read-write access is not required." OBJECT upsConfigOutputFreq MIN-ACCESS read-only DESCRIPTION "Read-write access is not required." ::= { upsCompliances 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.33.3.1.2 | upsBasicCompliance | 0 | 0 | The compliance statement for UPSs that support full-featured functions, such as control. |
| 1.3.6.1.2.1.33.3.1.3 | upsFullCompliance | 0 | 0 | The compliance statement for UPSs that support advanced full-featured functions. |