The amount of time T between successive transmissions of ILMI
messages on this interface for the purpose of detecting loss of
ILMI connectivity. The distinguished value zero disables ILMI
connectivity procedures on this interface.
atmIntfIlmiCheckConPollIntvl OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time T between successive transmissions of ILMI
messages on this interface for the purpose of detecting loss of
ILMI connectivity. The distinguished value zero disables ILMI
connectivity procedures on this interface."
REFERENCE
"ATM Forum, Integrated Local Management Interface
(ILMI) Specification, Version 4.0, af-ilmi-0065.000,
September 1996, Section 8.3.1"
DEFVAL { 5 }
View at oid-info.com
The amount of time T between successive transmissions of ILMI
messages on this interface for the purpose of detecting loss of
ILMI connectivity. The distinguished value zero disables ILMI
connectivity procedures on this interface.
The amount of time T between successive transmissions
of ILMI messages on this interface for the purpose of
detecting loss of ILMI connectivity. The distinguished
value zero disables ILMI connectivity procedures on
this interface.
Parsed from file ATM2-MIB.mib
Module: ATM2-MIB
atmIntfIlmiCheckConPollIntvl OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The amount of time T between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface." REFERENCE "ATM Forum, Integrated Local Management Interface (ILMI) Specification, Version 4.0, af-ilmi-0065.000, September 1996, Section 8.3.1" DEFVAL { 5 } ::= { atmInterfaceExtEntry 9 }
Automatically extracted from RFC3606
atmIntfIlmiCheckConPollIntvl OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time T between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface." REFERENCE "ATM Forum, Integrated Local Management Interface (ILMI) Specification, Version 4.0, af-ilmi-0065.000, September 1996, Section 8.3.1" DEFVAL { 5 } ::= { atmInterfaceExtEntry 9 }
atmIntfIlmiCheckConPollIntvl OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time T between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface." REFERENCE "ATM Forum, Integrated Local Management Interface (ILMI) Specification, Version 4.0, af-ilmi-0065.000, September 1996, Section 8.3.1" DEFVAL { 5 } ::= { atmInterfaceExtEntry 9 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.37.1.14.1.14.1.1 | atmIntfConfigType | 0 | 0 | The type of connection setup procedures configured for the ATM interface. Setting this variable to a value of 'other' is not all… |
| 1.3.6.1.2.1.37.1.14.1.14.1.2 | atmIntfActualType | 0 | 0 | The type of connection setup procedures currently being used on the interface. This may reflect a manually configured value for… |
| 1.3.6.1.2.1.37.1.14.1.14.1.3 | atmIntfConfigSide | 0 | 0 | The configured role of the managed entity as one side of the ATM interface. This value does not apply when the object atmIntfCon… |
| 1.3.6.1.2.1.37.1.14.1.14.1.4 | atmIntfActualSide | 0 | 0 | The current role used by the managed entity to represent one side of the ATM interface. |
| 1.3.6.1.2.1.37.1.14.1.14.1.5 | atmIntfIlmiAdminStatus | 0 | 0 | Indicates which components of ILMI are administratively enabled on this interface. If the 'ilmi' bit is not set, then no ILMI co… |
| 1.3.6.1.2.1.37.1.14.1.14.1.6 | atmIntfIlmiOperStatus | 0 | 0 | Indicates which components of ILMI are operational on this interface. |
| 1.3.6.1.2.1.37.1.14.1.14.1.7 | atmIntfIlmiFsmState | 0 | 0 | Indicates the state of the ILMI Finite State Machine associated with this interface. |
| 1.3.6.1.2.1.37.1.14.1.14.1.8 | atmIntfIlmiEstablishConPollIntvl | 0 | 0 | The amount of time S between successive transmissions of ILMI messages on this interface for the purpose of detecting establishme… |
| 1.3.6.1.2.1.37.1.14.1.14.1.10 | atmIntfIlmiConPollInactFactor | 0 | 0 | The number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is de… |
| 1.3.6.1.2.1.37.1.14.1.14.1.11 | atmIntfIlmiPublicPrivateIndctr | 0 | 0 | Specifies whether this end of the interface is advertised in ILMI as a device of the `public' or `private' type. |
| 1.3.6.1.2.1.37.1.14.1.14.1.12 | atmInterfaceConfMaxSvpcVpi | 0 | 0 | The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path c… |
| 1.3.6.1.2.1.37.1.14.1.14.1.13 | atmInterfaceCurrentMaxSvpcVpi | 0 | 0 | The maximum VPI that the signalling stack on the ATM interface may currently allocate to switched virtual path connections. This … |
| 1.3.6.1.2.1.37.1.14.1.14.1.14 | atmInterfaceConfMaxSvccVpi | 0 | 0 | The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channe… |
| 1.3.6.1.2.1.37.1.14.1.14.1.15 | atmInterfaceCurrentMaxSvccVpi | 0 | 0 | The maximum VPI that the signalling stack on the ATM interface may currently allocate to switched virtual channel connections. Th… |
| 1.3.6.1.2.1.37.1.14.1.14.1.16 | atmInterfaceConfMinSvccVci | 0 | 0 | The minimum VCI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channe… |
| 1.3.6.1.2.1.37.1.14.1.14.1.17 | atmInterfaceCurrentMinSvccVci | 0 | 0 | The minimum VCI that the signalling stack on the ATM interface may currently allocate to switched virtual channel connections. Th… |
| 1.3.6.1.2.1.37.1.14.1.14.1.18 | atmIntfSigVccRxTrafficDescrIndex | 0 | 0 | This object identifies the row in the atmTrafficDescrParamTable used during ILMI auto-configuration to specify the advertised sig… |
| 1.3.6.1.2.1.37.1.14.1.14.1.19 | atmIntfSigVccTxTrafficDescrIndex | 0 | 0 | This object identifies the row in the atmTrafficDescrParamTable used during ILMI auto-configuration to specify the advertised sig… |
| 1.3.6.1.2.1.37.1.14.1.14.1.20 | atmIntfPvcFailures | 0 | 0 | The number of times the operational status of a PVPL or PVCL on this interface has gone down. |
| 1.3.6.1.2.1.37.1.14.1.14.1.21 | atmIntfCurrentlyFailingPVpls | 0 | 0 | The current number of VPLs on this interface for which there is an active row in the atmVplTable having an atmVplConnKind value o… |
| 1.3.6.1.2.1.37.1.14.1.14.1.22 | atmIntfCurrentlyFailingPVcls | 0 | 0 | The current number of VCLs on this interface for which there is an active row in the atmVclTable having an atmVclConnKind value o… |
| 1.3.6.1.2.1.37.1.14.1.14.1.23 | atmIntfPvcFailuresTrapEnable | 0 | 0 | Allows the generation of traps in response to PVCL or PVPL failures on this interface. |
| 1.3.6.1.2.1.37.1.14.1.14.1.24 | atmIntfPvcNotificationInterval | 0 | 0 | The minimum interval between the sending of atmIntfPvcFailuresTrap notifications for this interface. |
| 1.3.6.1.2.1.37.1.14.1.14.1.25 | atmIntfLeafSetupFailures | 0 | 0 | Number of setup failures. For root, this is the number of rejected setup requests and for leaf, this is the number of setup fail… |
| 1.3.6.1.2.1.37.1.14.1.14.1.26 | atmIntfLeafSetupRequests | 0 | 0 | Number of setup requests. For root, this includes both incoming setup request and root intiated setup requests. |