mdmCCCallSetUpFailTimer OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter specifies the amount of time, in seconds,
that the modem shall allow between either answering a call
(automatically or manually) or completion of dialing, and
establishment of a connection with the remote modem. If no
connection is established during this time, the modem
disconnects from the line and returns a result code
indicating the cause of the disconnection. In TIA-602, this
is controlled by the value in the S7 register."
REFERENCE "V.58 callSetUpFailTimer"
DEFVAL { 30 }
View at oid-info.com
This parameter specifies the amount of time, in seconds,
that the modem shall allow between either answering a call
(automatically or manually) or completion of dialing, and
establishment of a connection with the remote modem. If no
connection is established during this time, the modem
disconnects from the line and returns a result code
indicating the cause of the disconnection. In TIA-602, this
is controlled by the value in the S7 register.
Parsed from file rfc1696.mib.txt
Company: lucent
Module: Modem-MIB
Automatically extracted from RFC1696
mdmCCCallSetUpFailTimer OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter specifies the amount of time, in seconds, that the modem shall allow between either answering a call (automatically or manually) or completion of dialing, and establishment of a connection with the remote modem. If no connection is established during this time, the modem disconnects from the line and returns a result code indicating the cause of the disconnection. In TIA-602, this is controlled by the value in the S7 register." REFERENCE "V.58 callSetUpFailTimer" DEFVAL { 30 } ::= { mdmCallControlEntry 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.38.1.7.1.1 | mdmCCRingsBeforeAnswer | 0 | 0 | Determines which ring the modem will wait to answer the phone on. If this value is `0', the modem will not go offhook and answer… |
| 1.3.6.1.2.1.38.1.7.1.3 | mdmCCResultCodeEnable | 0 | 0 | When disabled, the DCE shall issue no 'result codes' of any kind to the DTE either in response to unsolicited events (eg. ring si… |
| 1.3.6.1.2.1.38.1.7.1.4 | mdmCCEscapeAction | 0 | 0 | The modem's action upon successfully recognizing the 'escape to command mode' character sequence. |
| 1.3.6.1.2.1.38.1.7.1.5 | mdmCCCallDuration | 0 | 0 | Present or last completed connection time in seconds. If there have been no previous connections, this value should be -1. |
| 1.3.6.1.2.1.38.1.7.1.6 | mdmCCConnectionFailReason | 0 | 0 | Indicates the reason that the last connection or attempt failed. The meaning of each reason code is explained below. unknown: This… |