The Average Bit Rate of the sender's data
stream. Within a transmission burst, the ar-
rival rate may be as fast as rsvpResvFwdTSpec-
PeakRate (if supported by the service model);
however, averaged across two or more burst in-
tervals, the rate should not exceed
rsvpResvFwdTSpecRate.
Note that this is a prediction, often based on
the general capability of a type of codec or
particular encoding; the measured average rate
may be significantly lower.
Parsed from file RSVP-MIB.mib
Module: RSVP-MIB
The Average Bit Rate of the sender's data
stream. Within a transmission burst, the
arrival rate may be as fast as
rsvpResvFwdTSpecPeakRate (if supported by the
service model); however, averaged across two or
more burst intervals, the rate should not
exceed rsvpResvFwdTSpecRate.
Note that this is a prediction, often based on
the general capability of a type of codec or
particular encoding; the measured average rate
may be significantly lower.
rsvpResvFwdTSpecRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average Bit Rate of the senders data
stream. Within a transmission burst, the
arrival rate may be as fast as
rsvpResvFwdTSpecPeakRate (if supported by the
service model); however, averaged across two or
more burst intervals, the rate should not
exceed rsvpResvFwdTSpecRate.
Note that this is a prediction, often based on
the general capability of a type of codec or
particular encoding; the measured average rate
may be significantly lower."
View at oid-info.com
The Average Bit Rate of the sender's data
stream. Within a transmission burst, the ar-
rival rate may be as fast as rsvpResvFwdTSpec-
PeakRate (if supported by the service model);
however, averaged across two or more burst in-
tervals, the rate should not exceed
rsvpResvFwdTSpecRate.
Note that this is a prediction, often based on
the general capability of a type of codec or
particular encoding; the measured average rate
may be significantly lower.
Parsed from file INT_2206.MIB.txt
Company: None
Module: RSVP-MIB
The Average Bit Rate of the sender's data
stream. Within a transmission burst, the
arrival rate may be as fast as
rsvpResvFwdTSpecPeakRate (if supported by the
service model); however, averaged across two or
more burst intervals, the rate should not
exceed rsvpResvFwdTSpecRate.
Note that this is a prediction, often based on
the general capability of a type of codec or
particular encoding; the measured average rate
may be significantly lower.
rsvpResvFwdTSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as rsvpResvFwdTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed rsvpResvFwdTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower." ::= { rsvpResvFwdEntry 14 }
rsvpResvFwdTSpecRate OBJECT-TYPE SYNTAX BitRate ACCESS read-only STATUS mandatory DESCRIPTION "The Average Bit Rate of the sender's data stream. Within a transmission burst, the arrival rate may be as fast as rsvpResvFwdTSpecPeakRate (if supported by the service model); however, averaged across two or more burst intervals, the rate should not exceed rsvpResvFwdTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower." ::= { rsvpResvFwdEntry 14 }
Automatically extracted from Cisco "SNMP v2 MIBs".
rsvpResvFwdTSpecRate OBJECT-TYPE SYNTAX BitRate ACCESS read-only STATUS mandatory DESCRIPTION "The Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as rsvpResvFwdTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed rsvpResvFwdTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower." ::= { rsvpResvFwdEntry 14 }
rsvpResvFwdTSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The Average Bit Rate of the sender's data stream. Within a transmission burst, the arrival rate may be as fast as rsvpResvFwdTSpecPeakRate (if supported by the service model); however, averaged across two or more burst intervals, the rate should not exceed rsvpResvFwdTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower." ::= { rsvpResvFwdEntry 14 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.51.1.5.1.1 | rsvpResvFwdNumber, rsvpResvFwdSessionIndex | 0 | 0 | The number of this reservation request. This is for SNMP Indexing purposes only and has no relation to any protocol value. |
| 1.3.6.1.2.1.51.1.5.1.2 | rsvpResvFwdType | 0 | 0 | The type of session (IP4, IP6, IP6 with flow information, etc). |
| 1.3.6.1.2.1.51.1.5.1.3 | rsvpResvFwdDestAddr | 0 | 0 | The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus ob… |
| 1.3.6.1.2.1.51.1.5.1.4 | rsvpResvFwdSenderAddr | 0 | 0 | The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This objec… |
| 1.3.6.1.2.1.51.1.5.1.5 | rsvpResvFwdDestAddrLength | 0 | 0 | The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 3… |
| 1.3.6.1.2.1.51.1.5.1.6 | rsvpResvFwdSenderAddrLength | 0 | 0 | The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32… |
| 1.3.6.1.2.1.51.1.5.1.7 | rsvpResvFwdProtocol | 0 | 0 | The IP Protocol used by a session. for secure sessions, this indicates IP Security. This ob- ject may not be changed when the v… |
| 1.3.6.1.2.1.51.1.5.1.8 | rsvpResvFwdDestPort | 0 | 0 | The UDP or TCP port number used as a destination port for all senders in this session. If the IP protocol in use,… |
| 1.3.6.1.2.1.51.1.5.1.9 | rsvpResvFwdPort | 0 | 0 | The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, spec… |
| 1.3.6.1.2.1.51.1.5.1.10 | rsvpResvFwdHopAddr, rsvpResvFwdTSpecLevel | 0 | 0 | The address of the (previous) RSVP that will receive this message. |
| 1.3.6.1.2.1.51.1.5.1.11 | rsvpResvFwdHopLih | 0 | 0 | The Logical Interface Handle sent to the (pre- vious) RSVP that will receive this message. |
| 1.3.6.1.2.1.51.1.5.1.12 | rsvpResvFwdInterface | 0 | 0 | The ifIndex value of the interface on which this RESV message was most recently sent. |
| 1.3.6.1.2.1.51.1.5.1.13 | rsvpResvFwdService | 0 | 0 | The QoS Service classification requested. |
| 1.3.6.1.2.1.51.1.5.1.15 | rsvpResvFwdTSpecPeakRate | 0 | 0 | The Peak Bit Rate of the sender's data stream Traffic arrival is not expected to exceed this rate at any time, apart from the… |
| 1.3.6.1.2.1.51.1.5.1.16 | rsvpResvFwdTSpecBurst | 0 | 0 | The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, … |
| 1.3.6.1.2.1.51.1.5.1.17 | rsvpResvFwdTSpecMinTU | 0 | 0 | The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size. |
| 1.3.6.1.2.1.51.1.5.1.18 | rsvpResvFwdTSpecMaxTU | 0 | 0 | The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus th… |
| 1.3.6.1.2.1.51.1.5.1.19 | rsvpResvFwdRSpecRate | 0 | 0 | If the requested service is Guaranteed, as specified by rsvpResvService, this is the clearing rate that is being re… |
| 1.3.6.1.2.1.51.1.5.1.20 | rsvpResvFwdRSpecSlack | 0 | 0 | If the requested service is Guaranteed, as specified by rsvpResvService, this is the delay slack. Otherwise, it is zero, or t… |
| 1.3.6.1.2.1.51.1.5.1.21 | rsvpResvFwdInterval | 0 | 0 | The interval between refresh messages adver- tised to the Previous Hop. |
| 1.3.6.1.2.1.51.1.5.1.22 | rsvpResvFwdScope | 0 | 0 | The contents of the scope object, displayed as an uninterpreted string of octets, including the object header. In the absence… |
| 1.3.6.1.2.1.51.1.5.1.23 | rsvpResvFwdShared | 0 | 0 | If TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested. |
| 1.3.6.1.2.1.51.1.5.1.24 | rsvpResvFwdExplicit | 0 | 0 | If TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scop… |
| 1.3.6.1.2.1.51.1.5.1.25 | rsvpResvFwdRSVPHop | 0 | 0 | If TRUE, the node believes that the next IP hop is an RSVP hop. If FALSE, the node be- lieves that the next IP hop may no… |
| 1.3.6.1.2.1.51.1.5.1.26 | rsvpResvFwdLastChange | 0 | 0 | The time of the last change in this request; This is either the first time it was sent or the time of the most recent change… |
| 1.3.6.1.2.1.51.1.5.1.27 | rsvpResvFwdPolicy | 0 | 0 | The contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence … |
| 1.3.6.1.2.1.51.1.5.1.28 | rsvpResvFwdStatus | 0 | 0 | 'active' for all active RESV messages. This object may be used to delete RESV information. |
| 1.3.6.1.2.1.51.1.5.1.29 | rsvpResvFwdTTL | 0 | 0 | The TTL value in the RSVP header that was last received. |
| 1.3.6.1.2.1.51.1.5.1.30 | rsvpResvFwdFlowId | 0 | 0 | The flow ID that this receiver is using, if this is an IPv6 session. |