The UDP or TCP port number used as a destina-
tion port for all senders in this session. If
the IP protocol in use, specified by
rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports. This ob-
ject may not be changed when the value of the
RowStatus object is 'active'.
Parsed from file RSVP-MIB.mib
Module: RSVP-MIB
The UDP or TCP port number used as a
destination port for all senders in this
session. If the IP protocol in use, specified
by rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports. This
object may not be changed when the value of the
RowStatus object is 'active'.
rsvpResvFwdDestPort OBJECT-TYPE
SYNTAX Port
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP or TCP port number used as a
destination port for all senders in this
session. If the IP protocol in use, specified
by rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports. This
object may not be changed when the value of the
RowStatus object is active."
View at oid-info.com
The UDP or TCP port number used as a destina-
tion port for all senders in this session. If
the IP protocol in use, specified by
rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports. This ob-
ject may not be changed when the value of the
RowStatus object is 'active'.
Parsed from file INT_2206.MIB.txt
Company: None
Module: RSVP-MIB
The UDP or TCP port number used as a
destination port for all senders in this
session. If the IP protocol in use, specified
by rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports. This
object may not be changed when the value of the
RowStatus object is 'active'.
rsvpResvFwdDestPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvFwdEntry 8 }
rsvpResvFwdDestPort OBJECT-TYPE SYNTAX Port ACCESS read-only STATUS mandatory DESCRIPTION "The UDP or TCP port number used as a destination port for all senders in this session. If the IP protocol in use, specified by rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvFwdEntry 8 }
Automatically extracted from Cisco "SNMP v2 MIBs".
rsvpResvFwdDestPort OBJECT-TYPE SYNTAX Port ACCESS read-only STATUS mandatory DESCRIPTION "The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvFwdEntry 8 }
rsvpResvFwdDestPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP or TCP port number used as a destination port for all senders in this session. If the IP protocol in use, specified by rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvFwdEntry 8 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.51.1.5.1.1 | rsvpResvFwdNumber, rsvpResvFwdSessionIndex | 0 | 0 | The number of this reservation request. This is for SNMP Indexing purposes only and has no relation to any protocol value. |
| 1.3.6.1.2.1.51.1.5.1.2 | rsvpResvFwdType | 0 | 0 | The type of session (IP4, IP6, IP6 with flow information, etc). |
| 1.3.6.1.2.1.51.1.5.1.3 | rsvpResvFwdDestAddr | 0 | 0 | The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus ob… |
| 1.3.6.1.2.1.51.1.5.1.4 | rsvpResvFwdSenderAddr | 0 | 0 | The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This objec… |
| 1.3.6.1.2.1.51.1.5.1.5 | rsvpResvFwdDestAddrLength | 0 | 0 | The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 3… |
| 1.3.6.1.2.1.51.1.5.1.6 | rsvpResvFwdSenderAddrLength | 0 | 0 | The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32… |
| 1.3.6.1.2.1.51.1.5.1.7 | rsvpResvFwdProtocol | 0 | 0 | The IP Protocol used by a session. for secure sessions, this indicates IP Security. This ob- ject may not be changed when the v… |
| 1.3.6.1.2.1.51.1.5.1.9 | rsvpResvFwdPort | 0 | 0 | The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, spec… |
| 1.3.6.1.2.1.51.1.5.1.10 | rsvpResvFwdHopAddr, rsvpResvFwdTSpecLevel | 0 | 0 | The address of the (previous) RSVP that will receive this message. |
| 1.3.6.1.2.1.51.1.5.1.11 | rsvpResvFwdHopLih | 0 | 0 | The Logical Interface Handle sent to the (pre- vious) RSVP that will receive this message. |
| 1.3.6.1.2.1.51.1.5.1.12 | rsvpResvFwdInterface | 0 | 0 | The ifIndex value of the interface on which this RESV message was most recently sent. |
| 1.3.6.1.2.1.51.1.5.1.13 | rsvpResvFwdService | 0 | 0 | The QoS Service classification requested. |
| 1.3.6.1.2.1.51.1.5.1.14 | rsvpResvFwdTSpecRate | 0 | 0 | The Average Bit Rate of the sender's data stream. Within a transmission burst, the arrival rate may be as f… |
| 1.3.6.1.2.1.51.1.5.1.15 | rsvpResvFwdTSpecPeakRate | 0 | 0 | The Peak Bit Rate of the sender's data stream Traffic arrival is not expected to exceed this rate at any time, apart from the… |
| 1.3.6.1.2.1.51.1.5.1.16 | rsvpResvFwdTSpecBurst | 0 | 0 | The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, … |
| 1.3.6.1.2.1.51.1.5.1.17 | rsvpResvFwdTSpecMinTU | 0 | 0 | The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size. |
| 1.3.6.1.2.1.51.1.5.1.18 | rsvpResvFwdTSpecMaxTU | 0 | 0 | The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus th… |
| 1.3.6.1.2.1.51.1.5.1.19 | rsvpResvFwdRSpecRate | 0 | 0 | If the requested service is Guaranteed, as specified by rsvpResvService, this is the clearing rate that is being re… |
| 1.3.6.1.2.1.51.1.5.1.20 | rsvpResvFwdRSpecSlack | 0 | 0 | If the requested service is Guaranteed, as specified by rsvpResvService, this is the delay slack. Otherwise, it is zero, or t… |
| 1.3.6.1.2.1.51.1.5.1.21 | rsvpResvFwdInterval | 0 | 0 | The interval between refresh messages adver- tised to the Previous Hop. |
| 1.3.6.1.2.1.51.1.5.1.22 | rsvpResvFwdScope | 0 | 0 | The contents of the scope object, displayed as an uninterpreted string of octets, including the object header. In the absence… |
| 1.3.6.1.2.1.51.1.5.1.23 | rsvpResvFwdShared | 0 | 0 | If TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested. |
| 1.3.6.1.2.1.51.1.5.1.24 | rsvpResvFwdExplicit | 0 | 0 | If TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scop… |
| 1.3.6.1.2.1.51.1.5.1.25 | rsvpResvFwdRSVPHop | 0 | 0 | If TRUE, the node believes that the next IP hop is an RSVP hop. If FALSE, the node be- lieves that the next IP hop may no… |
| 1.3.6.1.2.1.51.1.5.1.26 | rsvpResvFwdLastChange | 0 | 0 | The time of the last change in this request; This is either the first time it was sent or the time of the most recent change… |
| 1.3.6.1.2.1.51.1.5.1.27 | rsvpResvFwdPolicy | 0 | 0 | The contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence … |
| 1.3.6.1.2.1.51.1.5.1.28 | rsvpResvFwdStatus | 0 | 0 | 'active' for all active RESV messages. This object may be used to delete RESV information. |
| 1.3.6.1.2.1.51.1.5.1.29 | rsvpResvFwdTTL | 0 | 0 | The TTL value in the RSVP header that was last received. |
| 1.3.6.1.2.1.51.1.5.1.30 | rsvpResvFwdFlowId | 0 | 0 | The flow ID that this receiver is using, if this is an IPv6 session. |