The port's type of output flow control. 'none'
indicates no flow control at this level or below.
'xonXoff' indicates software flow control by
recognizing XON and XOFF characters. 'hardware'
indicates flow control delegated to the lower level,
for example a parallel port.
'ctsRts' and 'dsrDtr' are specific to RS-232-like
ports. Although not architecturally pure, they are
included here for simplicy's sake.
Parsed from file XYPLEX-CONCATENATED-MIB.mib
Module: XYPLEX-CONCATENATED-MIB
Vendor: MRV Communications, In-Reach Product Division
Module: XYPLEX-CONCATENATED-MIB
[Automatically extracted from oidview.com]
charPortOutFlowType OBJECT-TYPE SYNTAX INTEGER { none(1), xonXoff(2), hardware(3), ctsRts(4), dsrDtr(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON and XOFF characters. 'hardware' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts' and 'dsrDtr' are specific to RS-232-like ports. Although not architecturally pure, they are included here for simplicy's sake." ::= { charPortEntry 10 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.19.2.1.1 | charPortIndex | 0 | 0 | A unique value for each character port. Its value ranges between 1 and the value of charNumber. By convention and if possible, … |
1.3.6.1.3.19.2.1.2 | charPortName | 0 | 0 | An administratively assigned name for the port, typically with some local significance. |
1.3.6.1.3.19.2.1.3 | charPortType | 0 | 0 | The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not. |
1.3.6.1.3.19.2.1.4 | charPortHardware | 0 | 0 | None |
1.3.6.1.3.19.2.1.5 | charPortReset | 0 | 0 | A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessio… |
1.3.6.1.3.19.2.1.6 | charPortAdminStatus | 0 | 0 | The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form … |
1.3.6.1.3.19.2.1.7 | charPortOperStatus | 0 | 0 | The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates i… |
1.3.6.1.3.19.2.1.8 | charPortLastChange | 0 | 0 | The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the… |
1.3.6.1.3.19.2.1.9 | charPortInFlowType | 0 | 0 | The port's type of input flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flo… |
1.3.6.1.3.19.2.1.11 | charPortInFlowState | 0 | 0 | The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level… |
1.3.6.1.3.19.2.1.12 | charPortOutFlowState | 0 | 0 | The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this lev… |
1.3.6.1.3.19.2.1.13 | charPortInCharacters | 0 | 0 | Total number of characters detected as input from the port since system re-initialization and while the port operational state wa… |
1.3.6.1.3.19.2.1.14 | charPortOutCharacters | 0 | 0 | Total number of characters detected as output to the port since system re-initialization and while the port operational state was… |
1.3.6.1.3.19.2.1.15 | charPortAdminOrigin | 0 | 0 | The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establis… |
1.3.6.1.3.19.2.1.16 | charPortSessionMaximum | 0 | 0 | The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less t… |
1.3.6.1.3.19.2.1.17 | charPortSessionNumber | 0 | 0 | The number of open sessions on the port that are in the connecting, connected, or disconnecting state. |
1.3.6.1.3.19.2.1.18 | charPortSessionIndex | 0 | 0 | The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the… |