The port's desired state, independent of flow
control. 'enabled' indicates that the port is
allowed to pass characters and form new sessions.
'disabled' indicates that the port is allowed to
pass characters but not form new sessions. 'off'
indicates that the port is not allowed to pass
characters or have any sessions. 'maintenance'
indicates a maintenance mode, exclusive of normal
operation, such as running a test.
Parsed from file XYPLEX-CONCATENATED-MIB.mib
Module: XYPLEX-CONCATENATED-MIB
Vendor: MRV Communications, In-Reach Product Division
Module: XYPLEX-CONCATENATED-MIB
[Automatically extracted from oidview.com]
charPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), off(3), maintenance(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form new sessions. 'disabled' indicates that the port is allowed to pass characters but not form new sessions. 'off' indicates that the port is not allowed to pass characters or have any sessions. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test." ::= { charPortEntry 6 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.3.19.2.1.1 | charPortIndex | 0 | 0 | A unique value for each character port. Its value ranges between 1 and the value of charNumber. By convention and if possible, … |
| 1.3.6.1.3.19.2.1.2 | charPortName | 0 | 0 | An administratively assigned name for the port, typically with some local significance. |
| 1.3.6.1.3.19.2.1.3 | charPortType | 0 | 0 | The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not. |
| 1.3.6.1.3.19.2.1.4 | charPortHardware | 0 | 0 | None |
| 1.3.6.1.3.19.2.1.5 | charPortReset | 0 | 0 | A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessio… |
| 1.3.6.1.3.19.2.1.7 | charPortOperStatus | 0 | 0 | The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates i… |
| 1.3.6.1.3.19.2.1.8 | charPortLastChange | 0 | 0 | The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the… |
| 1.3.6.1.3.19.2.1.9 | charPortInFlowType | 0 | 0 | The port's type of input flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flo… |
| 1.3.6.1.3.19.2.1.10 | charPortOutFlowType | 0 | 0 | The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software fl… |
| 1.3.6.1.3.19.2.1.11 | charPortInFlowState | 0 | 0 | The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level… |
| 1.3.6.1.3.19.2.1.12 | charPortOutFlowState | 0 | 0 | The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this lev… |
| 1.3.6.1.3.19.2.1.13 | charPortInCharacters | 0 | 0 | Total number of characters detected as input from the port since system re-initialization and while the port operational state wa… |
| 1.3.6.1.3.19.2.1.14 | charPortOutCharacters | 0 | 0 | Total number of characters detected as output to the port since system re-initialization and while the port operational state was… |
| 1.3.6.1.3.19.2.1.15 | charPortAdminOrigin | 0 | 0 | The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establis… |
| 1.3.6.1.3.19.2.1.16 | charPortSessionMaximum | 0 | 0 | The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less t… |
| 1.3.6.1.3.19.2.1.17 | charPortSessionNumber | 0 | 0 | The number of open sessions on the port that are in the connecting, connected, or disconnecting state. |
| 1.3.6.1.3.19.2.1.18 | charPortSessionIndex | 0 | 0 | The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the… |