The traffic engineering distribution protocol(s)
used by this LSR. Note that an LSR may support
more than one distribution protocols
simultaneously.
Parsed from file MPLS-TE-MIB.mib
Module: MPLS-TE-MIB
The traffic engineering distribution protocol(s)
used by this LSR. Note that an LSR may support
more than one distribution protocols
simultaneously.
mplsTunnelTEDistProto OBJECT-TYPE
SYNTAX BITS {
other (0),
ospf (1),
isis (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic engineering distribution protocol(s)
used by this LSR. Note that an LSR may support
more than one distribution protocols
simultaneously."
View at oid-info.com
The traffic engineering distribution protocol(s)
used by this LSR. Note that an LSR may support more
than one distribution protocol simultaneously.
Parsed from file mpls-te.mib.txt
Company: None
Module: MPLS-TE-MIB
The traffic engineering distribution protocol(s)
used by this LSR. Note that an LSR may support
more than one distribution protocols
simultaneously.
mplsTunnelTEDistProto OBJECT-TYPE SYNTAX BITS { other (0), ospf (1), isis (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic engineering distribution protocol(s) used by this LSR. Note that an LSR may support more than one distribution protocols simultaneously." ::= { mplsTeScalars 3 }
mplsTunnelTEDistProto OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) ACCESS read-only STATUS mandatory DESCRIPTION "The traffic engineering distribution protocol(s) used by this LSR. Note that an LSR may support more than one distribution protocols simultaneously." ::= { mplsTeScalars 3 }
Automatically extracted from Cisco "SNMP v2 MIBs".
mplsTunnelTEDistProto OBJECT-TYPE SYNTAX BITS { other (0), ospf (1), isis (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic engineering distribution protocol(s) used by this LSR. Note that an LSR may support more than one distribution protocol simultaneously." ::= { mplsTeScalars 3 }
mplsTunnelTEDistProto OBJECT-TYPE SYNTAX BITS { other (0), ospf (1), isis (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic engineering distribution protocol(s) used by this LSR. Note that an LSR may support more than one distribution protocols simultaneously." ::= { mplsTeScalars 3 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.95.1.3.0 | mplsTunnelTEDistProto | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.95.1.1 | mplsTunnelConfigured | 1 | 1 | The number of tunnels configured on this device. A tunnel is considered configured if the mplsTunnelRowStatus is active(1). |
1.3.6.1.3.95.1.2 | mplsTunnelActive | 2 | 24 | The number of tunnels active on this device. A tunnel is considered active if the mplsTunnelOperStatus is up(1). |
1.3.6.1.3.95.1.4 | mplsTunnelMaxHops | 1 | 1 | The maximum number of hops that can be specified for a tunnel on this device. |
1.3.6.1.3.95.1.5 | mplsTunnelHopTable | 1 | 13 | mplsTunnelHopTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The … |
1.3.6.1.3.95.1.6 | mplsTunnelResourceIndexNext | 0 | 0 | mplsTunnelResourceIndexNext OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This … |
1.3.6.1.3.95.1.7 | mplsTunnelResourceTable | 1 | 7 | mplsTunnelResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIP… |
1.3.6.1.3.95.1.8 | mplsTunnelARHopTable | 1 | 10 | mplsTunnelARHopTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelARHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "… |
1.3.6.1.3.95.1.9 | mplsTunnelTrapEnable | 0 | 0 | mplsTunnelTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true, th… |