Reference record for OID 1.3.6.1.3.95.1.5


parent
1.3.6.1.3.95.1 (mplsTeScalars)
node code
5
node name
mplsTunnelHopTable
dot oid
1.3.6.1.3.95.1.5
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) mplsTeMIB(95) mplsTeScalars(1) mplsTunnelHopTable(5)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) mplsTeMIB(95) mplsTeScalars(1) mplsTunnelHopTable(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) mplsTeMIB(95) mplsTeScalars(1) mplsTunnelHopTable(5)}
    • iri oid
  • /iso/identified-organization/dod/internet/experimental/mplsTeMIB/mplsTeScalars/mplsTunnelHopTable
  • /iso/org/dod/internet/experimental/mplsTeMIB/mplsTeScalars/mplsTunnelHopTable
  • /iso/iso-identified-organization/dod/internet/experimental/mplsTeMIB/mplsTeScalars/mplsTunnelHopTable
    • iri by oid_info
    /ISO/Identified-Organization/6/1/3/95/1/5

    Description by oid_info

    mplsTunnelHopTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MplsTunnelHopEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "The mplsTunnelHopTable is used to indicate the hops,
    strict or loose, for an MPLS tunnel defined in
    mplsTunnelTable, when it is established via
    signaling, for the outgoing direction of the tunnel.
    Each row in this table is indexed primarily by the
    same index, mplsTunnelIndex, as the row of the
    corresponding tunnel in mplsTunnelTable. Each row
    also has a secondary index mplsTunnelHopIndex
    corresponding to the next hop that this row
    corresponds to. The first row in the table is the
    first hop after the origination point of the tunnel.
    In case we want to specify a particular interface on
    the originating LSR of an outgoing tunnel by which
    we want packets to exit the LSR, we specify this as
    the first hop for this tunnel in
    mplsTunnelHopTable."
    View at oid-info.com

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.3)

    Internet Assigned Numbers Authority

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.3.95.1.5.1 mplsTunnelHopEntry 12 12 mplsTunnelHopEntry OBJECT-TYPE
    SYNTAX MplsTunnelHopEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "An entry in this…

    Brothers (8)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.3.95.1.1 mplsTunnelConfigured 1 1 The number of tunnels configured on this device. A
    tunnel is considered configured if the
    mplsTunnelRowStatus is active(1).
    1.3.6.1.3.95.1.2 mplsTunnelActive 2 24 The number of tunnels active on this device. A
    tunnel is considered active if the
    mplsTunnelOperStatus is up(1).
    1.3.6.1.3.95.1.3 mplsTunnelTEDistProto 1 1 The traffic engineering distribution protocol(s)
    used by this LSR. Note that an LSR may support more
    than one distribution protoc…
    1.3.6.1.3.95.1.4 mplsTunnelMaxHops 1 1 The maximum number of hops that can be specified
    for a tunnel on this device.
    1.3.6.1.3.95.1.6 mplsTunnelResourceIndexNext 0 0 mplsTunnelResourceIndexNext OBJECT-TYPE
    SYNTAX Integer32 (0..2147483647)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "This …
    1.3.6.1.3.95.1.7 mplsTunnelResourceTable 1 7 mplsTunnelResourceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MplsTunnelResourceEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIP…
    1.3.6.1.3.95.1.8 mplsTunnelARHopTable 1 10 mplsTunnelARHopTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MplsTunnelARHopEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "…
    1.3.6.1.3.95.1.9 mplsTunnelTrapEnable 0 0 mplsTunnelTrapEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "If this object is true, th…