Reference record for OID 1.3.6.1.3.95.2.4.1


parent
1.3.6.1.3.95.2.4 (mplsTunnelHopTable)
node code
1
node name
mplsTunnelHopEntry
dot oid
1.3.6.1.3.95.2.4.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) mplsTeMIB(95) mplsTeObjects(2) mplsTunnelHopTable(4) mplsTunnelHopEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) mplsTeMIB(95) mplsTeObjects(2) mplsTunnelHopTable(4) mplsTunnelHopEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) mplsTeMIB(95) mplsTeObjects(2) mplsTunnelHopTable(4) mplsTunnelHopEntry(1)}
    • iri oid
  • /iso/identified-organization/dod/internet/experimental/mplsTeMIB/mplsTeObjects/mplsTunnelHopTable/mplsTunnelHopEntry
  • /iso/org/dod/internet/experimental/mplsTeMIB/mplsTeObjects/mplsTunnelHopTable/mplsTunnelHopEntry
  • /iso/iso-identified-organization/dod/internet/experimental/mplsTeMIB/mplsTeObjects/mplsTunnelHopTable/mplsTunnelHopEntry
    • iri by oid_info
    /ISO/Identified-Organization/6/1/3/95/2/4/1

    Description by circitor

    An entry in this table represents a tunnel hop.
    An entry is created by a network administrator for
    signaled ERLSP set up by an MPLS signaling
    protocol.

    Parsed from file MPLS-TE-MIB.mib
    Module: MPLS-TE-MIB

    Description by cisco_v1

    An entry in this table represents a tunnel hop.
    An entry is created by a network administrator for
    signaled ERLSP set up by an MPLS signaling
    protocol.

    Description by oid_info

    mplsTunnelHopEntry OBJECT-TYPE
    SYNTAX MplsTunnelHopEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "An entry in this table represents a tunnel hop.
    An entry is created by a network administrator for
    signaled ERLSP set up by an MPLS signaling
    protocol."
    INDEX { mplsTunnelHopListIndex, mplsPathOptionIndex,
    mplsTunnelHopIndex }
    View at oid-info.com

    Description by mibdepot

    An entry in this table represents a tunnel hop. An
    entry is created by a network administrator for
    signaled ERLSP set up by an MPLS signaling
    protocol.

    Parsed from file mpls-te.mib.txt
    Company: None
    Module: MPLS-TE-MIB

    Description by cisco

    An entry in this table represents a tunnel hop.
    An entry is created by a network administrator for
    signaled ERLSP set up by an MPLS signaling
    protocol.

    Information by circitor

    mplsTunnelHopEntry  OBJECT-TYPE
   SYNTAX        MplsTunnelHopEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
          "An entry in this table represents a tunnel hop.
           An entry is created by a network administrator for
           signaled ERLSP set up by an MPLS signaling
           protocol."
   INDEX { mplsTunnelHopListIndex, mplsPathOptionIndex,
          mplsTunnelHopIndex }
      ::= { mplsTunnelHopTable 1 }

    Information by cisco_v1

    mplsTunnelHopEntry OBJECT-TYPE
    SYNTAX MplsTunnelHopEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in this table represents a tunnel hop.
         An entry is created by a network administrator for
         signaled ERLSP set up by an MPLS signaling
         protocol."
    INDEX { mplsTunnelHopListIndex, mplsPathOptionIndex, mplsTunnelHopIndex }
    ::= { mplsTunnelHopTable 1 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    mplsTunnelHopEntry  OBJECT-TYPE
   SYNTAX        MplsTunnelHopEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table represents a tunnel hop.  An
          entry is created by a network administrator for
          signaled ERLSP set up by an MPLS signaling
          protocol."
   INDEX {
      mplsTunnelHopListIndex,
      mplsTunnelHopPathOptionIndex,
      mplsTunnelHopIndex
   }
   ::= { mplsTunnelHopTable 1 }

    Information by cisco

    mplsTunnelHopEntry  OBJECT-TYPE
   SYNTAX        MplsTunnelHopEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
          "An entry in this table represents a tunnel hop.
           An entry is created by a network administrator for
           signaled ERLSP set up by an MPLS signaling
           protocol."
   INDEX { mplsTunnelHopListIndex, mplsPathOptionIndex,
          mplsTunnelHopIndex }
      ::= { mplsTunnelHopTable 1 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.3)

    Internet Assigned Numbers Authority

    Children (16)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.3.95.2.4.1.1 mplsTunnelHopListIndex 0 0 Primary index into this table identifying a
    particular explicit route object.
    1.3.6.1.3.95.2.4.1.2 mplsPathOptionIndex, mplsTunnelHopPathOptionIndex 0 0 Secondary index into this table identifying a
    particular group of hops representing a particular
    configured path. This is otherwi…
    1.3.6.1.3.95.2.4.1.3 mplsTunnelHopIndex 0 0 Secondary index into this table identifying a
    particular hop.
    1.3.6.1.3.95.2.4.1.4 mplsTunnelHopAddrType 0 0 Denotes the address type of this tunnel hop.
    1.3.6.1.3.95.2.4.1.5 mplsTunnelHopIpv4Addr 0 0 If mplsTunnelHopAddrType is set to ipV4(1), then
    this value will contain the IPv4 address of this
    hop. This object is otherwise i…
    1.3.6.1.3.95.2.4.1.6 mplsTunnelHopIpv4PrefixLen 0 0 If mplsTunnelHopAddrType is ipV4(1), then the
    prefix length for this hop's IPv4 address is
    contained herein. This object is other…
    1.3.6.1.3.95.2.4.1.7 mplsTunnelHopIpv6Addr 0 0 If the mplsTunnelHopAddrType is set to ipV6(2),
    then this variable contains the IPv6 address of
    this hop. This object is otherwi…
    1.3.6.1.3.95.2.4.1.8 mplsTunnelHopIpv6PrefixLen 0 0 If mplsTunnelHopAddrType is set to ipV6(2), this
    value will contain the prefix length for this
    hop's IPv6 address. This object is…
    1.3.6.1.3.95.2.4.1.9 mplsTunnelHopAsNumber 0 0 If mplsTunnelHopAddrType is set to asNumber(3), then
    this value will contain the AS number of this hop.
    This object is otherwise …
    1.3.6.1.3.95.2.4.1.10 mplsTunnelHopLspId 0 0 If mplsTunnelHopAddrType is set to lspid(4), then
    this value will contain the LSPID of a tunnel of
    this hop. The present tunnel b…
    1.3.6.1.3.95.2.4.1.11 mplsTunnelHopType 0 0 Denotes whether this tunnel hop is routed in a
    strict or loose fashion.
    1.3.6.1.3.95.2.4.1.12 mplsTunnelHopRowStatus, mplsTunnelHopIncludeExclude 0 0 This variable is used to create, modify, and/or
    delete a row in this table.
    1.3.6.1.3.95.2.4.1.13 mplsTunnelHopStorageType, mplsTunnelHopPathOptionName 0 0 This variable indicates the storage type for this
    object.
    1.3.6.1.3.95.2.4.1.14 mplsTunnelHopEntryPathComp 0 0 If this value is set to dynamic, then the user
    should only specify the source and destination of
    the path and expect that the CSP…
    1.3.6.1.3.95.2.4.1.15 mplsTunnelHopRowStatus 0 0 None
    1.3.6.1.3.95.2.4.1.16 mplsTunnelHopStorageType 0 0 None