This object specifies the type of channel (interface,
port). The value of this object indicates which set
of tables contain additional information for this
channel.
When the value of this object is lowSpeed(1), then
additional information is found in the
actFpLowSpeedChannelTable; when the value is highSpeed(2),
additional information is found in the
actFpHighSpeedChannelTable. When the value of this
object is dsmData(3), then additional information for
this channel is found in the actFpDataChannelConfigTable.
Parsed from file act.mib.txt
Company: cai
Module: ACT-FP-CHANNEL
Vendor: Computer Associates
Module: ACT-CONSTANTS (act.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
actFpChannelType OBJECT-TYPE SYNTAX INTEGER { lowSpeed(1), highSpeed(2), dsmData(3), mosData(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the type of channel (interface, port). The value of this object indicates which set of tables contain additional information for this channel. When the value of this object is lowSpeed(1), then additional information is found in the actFpLowSpeedChannelTable; when the value is highSpeed(2), additional information is found in the actFpHighSpeedChannelTable. When the value of this object is dsmData(3), then additional information for this channel is found in the actFpDataChannelConfigTable." ::= { actFpChannelEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.1 | actFpChannelIndex | 0 | 0 | This object represents the unique identifier for a row in the channel table. The value of this object corresponds to an ifIndex … |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.3 | actFpChannelRate | 0 | 0 | The value of this object represents the rate of the channel. The value this object may assume is dependent upon (a) the type of … |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.4 | actFpChannelStatus | 0 | 0 | This object identifies the current state of the channel. The values and their respective meanings are: disabled - this channel i… |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.5 | actFpChannelCTS | 0 | 0 | This object specifies the behavior of the CTS signal. forcedOff(1) means that CTS is always off, forcedOn(2) means that CTS is al… |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.6 | actFpChannelCTSdelay | 0 | 0 | This object specifies the delay by which the CTS signal will transition following a transition in the RTS signal. The value of t… |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.7 | actFpChannelDSR | 0 | 0 | This object specifies the behavior of the DSR signal. forcedOff(1) means that DSR is always off, forcedOn(2) means that DSR is al… |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.8 | actFpChannelDCD | 0 | 0 | This object specifies the behavior of the DCD (Data Carrier Detect) signal. The value forcedOff(1) means that DCD is always off, … |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.9 | actFpChannelDestinationDlci | 0 | 0 | This object specifies the Frame Relay DLCI that is the logical 'other end' of this channel. |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.10 | actFpChannelDestinationSlot | 0 | 0 | This object indicates one component of the destination address for this channel. In conjunction with the DLCI and the destinatio… |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.11 | actFpChannelDestinationChannel | 0 | 0 | This object represents the final component of the destination address for this channel. In conjunction with the DLCI and the De… |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.12 | actFpChannelCallTimer | 0 | 0 | This object represents the amount of time, in seconds, in which a call can be established before the unit determines the call can… |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.13 | actFpChannelIncomingCallPolicy | 0 | 0 | This object sets the policy for incoming calls on this channel. The value inhibit(1) states that all incoming calls for this cha… |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.14 | actFpChannelOutgoingCallPolicy | 0 | 0 | This object specifies the policy for outgoing calls (connections) on this channel. When this object has the value inhibit(1), th… |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.15 | actFpChannelCallConnectionPolicy | 0 | 0 | This object specifies whether or not bandwidth is to be reserved when a call is established. |
| 1.3.6.1.4.1.1186.2.2.1.3.2.1.1.16 | actFpChannelDiscardEligible | 0 | 0 | This object specifies whether or not to consider outgoing data on this channel is to be considered 'throw-away'. When the value … |