OID reference

recordingStatus

1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6

Description

<Definition>The value of this object reflects the state of the recording located in this row. <Format> Value Description available this row is available for a new recording to be initiated for this recording class. When a recording is cleared, the value is set to available preevent the recording defined by recConfigID…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1206.4.1.1.7.9.9.1 (recRecordingEntry)
Node code
6
Node name
recordingStatus
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6
URN notation
urn:oid:1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1206 4 1 1 7 9 9 1 6}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) protocols(1) layers(1) application(7) recMech(9) recRecordingTable(9) recRecordingEntry(1) recordingStatus(6)}
OID-IRI notation
  • /1/3/6/1/4/1/1206/4/1/1/7/9/9/1/6
  • /ISO/Identified-Organization/6/1/4/1/1206/4/1/1/7/9/9/1/6
  • /ISO/3/6/1/4/1/1206/4/1/1/7/9/9/1/6
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/Protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/Protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/Protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/Protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1206/transportation/protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1206/transportation/Protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/nema/transportation/protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/nema/transportation/Protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/1206/transportation/protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/1206/transportation/Protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/nema/transportation/protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/nema/transportation/Protocols/layers/application/recMech/recRecordingTable/recRecordingEntry/recordingStatus
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
deprecated, mandatory

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — NTCIP published standard MIB annexes (reviewed modules), ITE public NTCIP working repository MIBs

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
deprecated

Variant 2 — NTCIP published standard MIB annexes (reviewed modules)

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
mandatory

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

ValueNameSource variants
1available1, 2
2preevent1, 2
3triggered1, 2
4complete1, 2

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In NTCIP1201-RecMech, the row index consists of these components in order:

  1. recordingClass (Integer32): one numeric subidentifier for the non-negative value.
  2. recordingNumber (Integer32): one numeric subidentifier for the non-negative value.

An instance has the form .1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6.<recordingClass>.<recordingNumber>. Use values present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 3 distinct definitions; some records may not include a definition.

Show 3 published definitions

recordingStatus · deprecated

recordingStatus OBJECT-TYPE
SYNTAX       INTEGER { available (1),
                         preevent (2),
                         triggered (3),
                         complete (4) }
MAX-ACCESS read-only
STATUS       deprecated
DESCRIPTION
   "<Definition>The value of this object reflects the state of the recording
   located in this row.
  <Format>
          Value        Description
          available    this row is available for a new recording to be initiated
                       for this recording class. When a recording is cleared, the
                       value is set to available
          preevent     the recording defined by recConfigID is collecting
                       pre-event record entries. Note: If the trigger point is
                       set to zero (0) percent or the trigger condition is
  already
                       satisfied when the recConfigID is configured, then the
                       value transitions straight from available to triggered.
          triggered    the recording defined by recConfigID has triggered and is
                       now collecting post event records. If the trigger point
  was
                       set to 100 percent, then the value transitions straight
  from
                       preevent to complete. If a recording was triggered and the
                       device experienced a power failure, then upon power
                       restoration it shall change the value to complete.
                       Triggered recordings shall survive a power outage.



                                                                                            

                 
        

           complete       the recording defined by recConfigID is now complete (i.e.
                          collected all of its post events) and ready for retrieval.
                          Completed recordings shall survive a power outage.


  <Supplanted by> ISO26048-1-Recording.fdRecordingRecordingStatus
  <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6"
::= { recRecordingEntry 6 }

recordingStatus · deprecated

recordingStatus  OBJECT-TYPE
  SYNTAX      INTEGER { available (1),
                        preevent (2),
                        triggered (3),
                        complete (4) }
  MAX-ACCESS  read-only
  STATUS      deprecated
  DESCRIPTION
    "<Definition>The value of this object reflects the state of the
      recording located in this row.
    <Format>
      Value      Description
      available  this row is available for a new recording to be initiated
                 for this recording class. When a recording is cleared, the 
                 value is set to available
      preevent   the recording defined by recConfigID is collecting
                 pre-event record entries. Note: If the trigger point is
                 set to zero (0) percent or the trigger condition is already
                 satisfied when the recConfigID is configured, then the
                 value transitions straight from available to triggered.
      triggered  the recording defined by recConfigID has triggered and is 
                 now collecting post event records. If the trigger point was 
                 set to 100 percent, then the value transitions straight from 
                 preevent to complete. If a recording was triggered and the
                 device experienced a power failure, then upon power 
                 restoration it shall change the value to complete.
                 Triggered recordings shall survive a power outage.
      complete   the recording defined by recConfigID is now complete (i.e.
                 collected all of its post events) and ready for retrieval.
                 Completed recordings shall survive a power outage.
    <Superseded by> NTCIP1201-RecMechV2.recMechV2RecordingStatus
    <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6"
::= { recRecordingEntry 6 }

recordingStatus · mandatory

recordingStatus OBJECT-TYPE
   SYNTAX INTEGER { available (1),
                         preevent (2),
                         triggered (3),
                         complete (4) }
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
        "<Definition>The value of this object reflects the state of the
           recording located in this row.

           Value          Description
           available      this row is available for a new recording to be initiated
                          for this recording class. When a recording is cleared, the
                          value is set to available
           preevent       the recording defined by recConfigID is collecting
                          pre-event record entries. Note: If the trigger point is
                          set to zero (0) percent or the trigger condition is already
                          satisfied when the recConfigID is configured, then the
                          value transitions straight from available to triggered.
           triggered      the recording defined by recConfigID has triggered and is now
                          collecting post event records. If the trigger point was set


                                                                                          

                                                                                       
                                                                                      

                    to 100 percent, then the value transitions straight from
                    preevent to complete. If a recording was triggered and the
                    device experienced a power failure, then upon power
                    restoration it shall change the value to complete.
                    Triggered recordings shall survive a power outage.
         complete   the recording defined by recConfigID is now complete (i.e.
                    collected all of its post events) and ready for retrieval.
                    Completed recordings shall survive a power outage.
        <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6
      "
::= { recRecordingEntry 6 }

Meaning

Descriptions

3 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

<Definition>The value of this object reflects the state of the recording located in this row. <Format> Value Description available this row is available for a new recording to be initiated for this recording class. When a recording is cleared, the value is set to available preevent the recording defined by recConfigID is collecting pre-event record entries. Note: If the trigger point is set to zero (0) percent or the trigger condition is already satisfied when the recConfigID is configured, then the value transitions straight from available to triggered. triggered the recording defined by recConfigID has triggered and is now collecting post event records. If the trigger point was set to 100 percent, then the value transitions straight from preevent to complete. If a recording was triggered and the device experienced a power failure, then upon power restoration it shall change the value to complete. Triggered recordings shall survive a power outage. complete the recording defined by recConfigID is now complete (i.e. collected all of its post events) and ready for retrieval. Completed recordings shall survive a power outage. <Supplanted by> ISO26048-1-Recording.fdRecordingRecordingStatus <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 2

<Definition>The value of this object reflects the state of the recording located in this row. <Format> Value Description available this row is available for a new recording to be initiated for this recording class. When a recording is cleared, the value is set to available preevent the recording defined by recConfigID is collecting pre-event record entries. Note: If the trigger point is set to zero (0) percent or the trigger condition is already satisfied when the recConfigID is configured, then the value transitions straight from available to triggered. triggered the recording defined by recConfigID has triggered and is now collecting post event records. If the trigger point was set to 100 percent, then the value transitions straight from preevent to complete. If a recording was triggered and the device experienced a power failure, then upon power restoration it shall change the value to complete. Triggered recordings shall survive a power outage. complete the recording defined by recConfigID is now complete (i.e. collected all of its post events) and ready for retrieval. Completed recordings shall survive a power outage. <Superseded by> NTCIP1201-RecMechV2.recMechV2RecordingStatus <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6

Sources for this description

ITE public NTCIP working repository MIBs

See 1 matching source record

Description 3

<Definition>The value of this object reflects the state of the recording located in this row. Value Description available this row is available for a new recording to be initiated for this recording class. When a recording is cleared, the value is set to available preevent the recording defined by recConfigID is collecting pre-event record entries. Note: If the trigger point is set to zero (0) percent or the trigger condition is already satisfied when the recConfigID is configured, then the value transitions straight from available to triggered. triggered the recording defined by recConfigID has triggered and is now collecting post event records. If the trigger point was set to 100 percent, then the value transitions straight from preevent to complete. If a recording was triggered and the device experienced a power failure, then upon power restoration it shall change the value to complete. Triggered recordings shall survive a power outage. complete the recording defined by recConfigID is now complete (i.e. collected all of its post events) and ready for retrieval. Completed recordings shall survive a power outage. <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Evidence

Source records

3 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 1

recordingStatus · deprecatedNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: deprecated.

Names: recordingStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "recordingStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "available",
    "(",
    "1",
    ")",
    ",",
    "preevent",
    "(",
    "2",
    ")",
    ",",
    "triggered",
    "(",
    "3",
    ")",
    ",",
    "complete",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "deprecated",
    "DESCRIPTION",
    "\"<Definition>The value of this object reflects the state of the recording located in this row. <Format> Value Description available this row is available for a new recording to be initiated for this recording class. When a recording is cleared, the value is set to available preevent the recording defined by recConfigID is collecting pre-event record entries. Note: If the trigger point is set to zero (0) percent or the trigger condition is already satisfied when the recConfigID is configured, then the value transitions straight from available to triggered. triggered the recording defined by recConfigID has triggered and is now collecting post event records. If the trigger point was set to 100 percent, then the value transitions straight from preevent to complete. If a recording was triggered and the device experienced a power failure, then upon power restoration it shall change the value to complete. Triggered recordings shall survive a power outage. complete the recording defined by recConfigID is now complete (i.e. collected all of its post events) and ready for retrieval. Completed recordings shall survive a power outage. <Supplanted by> ISO26048-1-Recording.fdRecordingRecordingStatus <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6\"",
    "::=",
    "{",
    "recRecordingEntry",
    "6",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "available",
            1
          ],
          [
            "preevent",
            2
          ],
          [
            "triggered",
            3
          ],
          [
            "complete",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "deprecated"
    ],
    [
      "DESCRIPTION",
      "<Definition>The value of this object reflects the state of the recording located in this row. <Format> Value Description available this row is available for a new recording to be initiated for this recording class. When a recording is cleared, the value is set to available preevent the recording defined by recConfigID is collecting pre-event record entries. Note: If the trigger point is set to zero (0) percent or the trigger condition is already satisfied when the recConfigID is configured, then the value transitions straight from available to triggered. triggered the recording defined by recConfigID has triggered and is now collecting post event records. If the trigger point was set to 100 percent, then the value transitions straight from preevent to complete. If a recording was triggered and the device experienced a power failure, then upon power restoration it shall change the value to complete. Triggered recordings shall survive a power outage. complete the recording defined by recConfigID is now complete (i.e. collected all of its post events) and ready for retrieval. Completed recordings shall survive a power outage. <Supplanted by> ISO26048-1-Recording.fdRecordingRecordingStatus <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 2ITE public NTCIP working repository MIBs1 record · 2 sources

Description 2

recordingStatus · deprecatedITE public NTCIP working repository MIBs2 sources

Status in source: deprecated.

Names: recordingStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "recordingStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "available",
    "(",
    "1",
    ")",
    ",",
    "preevent",
    "(",
    "2",
    ")",
    ",",
    "triggered",
    "(",
    "3",
    ")",
    ",",
    "complete",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "deprecated",
    "DESCRIPTION",
    "\"<Definition>The value of this object reflects the state of the recording located in this row. <Format> Value Description available this row is available for a new recording to be initiated for this recording class. When a recording is cleared, the value is set to available preevent the recording defined by recConfigID is collecting pre-event record entries. Note: If the trigger point is set to zero (0) percent or the trigger condition is already satisfied when the recConfigID is configured, then the value transitions straight from available to triggered. triggered the recording defined by recConfigID has triggered and is now collecting post event records. If the trigger point was set to 100 percent, then the value transitions straight from preevent to complete. If a recording was triggered and the device experienced a power failure, then upon power restoration it shall change the value to complete. Triggered recordings shall survive a power outage. complete the recording defined by recConfigID is now complete (i.e. collected all of its post events) and ready for retrieval. Completed recordings shall survive a power outage. <Superseded by> NTCIP1201-RecMechV2.recMechV2RecordingStatus <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6\"",
    "::=",
    "{",
    "recRecordingEntry",
    "6",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "available",
            1
          ],
          [
            "preevent",
            2
          ],
          [
            "triggered",
            3
          ],
          [
            "complete",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "deprecated"
    ],
    [
      "DESCRIPTION",
      "<Definition>The value of this object reflects the state of the recording located in this row. <Format> Value Description available this row is available for a new recording to be initiated for this recording class. When a recording is cleared, the value is set to available preevent the recording defined by recConfigID is collecting pre-event record entries. Note: If the trigger point is set to zero (0) percent or the trigger condition is already satisfied when the recConfigID is configured, then the value transitions straight from available to triggered. triggered the recording defined by recConfigID has triggered and is now collecting post event records. If the trigger point was set to 100 percent, then the value transitions straight from preevent to complete. If a recording was triggered and the device experienced a power failure, then upon power restoration it shall change the value to complete. Triggered recordings shall survive a power outage. complete the recording defined by recConfigID is now complete (i.e. collected all of its post events) and ready for retrieval. Completed recordings shall survive a power outage. <Superseded by> NTCIP1201-RecMechV2.recMechV2RecordingStatus <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 3NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 3

recordingStatus · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: recordingStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "recordingStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "available",
    "(",
    "1",
    ")",
    ",",
    "preevent",
    "(",
    "2",
    ")",
    ",",
    "triggered",
    "(",
    "3",
    ")",
    ",",
    "complete",
    "(",
    "4",
    ")",
    "}",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition>The value of this object reflects the state of the recording located in this row. Value Description available this row is available for a new recording to be initiated for this recording class. When a recording is cleared, the value is set to available preevent the recording defined by recConfigID is collecting pre-event record entries. Note: If the trigger point is set to zero (0) percent or the trigger condition is already satisfied when the recConfigID is configured, then the value transitions straight from available to triggered. triggered the recording defined by recConfigID has triggered and is now collecting post event records. If the trigger point was set to 100 percent, then the value transitions straight from preevent to complete. If a recording was triggered and the device experienced a power failure, then upon power restoration it shall change the value to complete. Triggered recordings shall survive a power outage. complete the recording defined by recConfigID is now complete (i.e. collected all of its post events) and ready for retrieval. Completed recordings shall survive a power outage. <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6 \"",
    "::=",
    "{",
    "recRecordingEntry",
    "6",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "available",
            1
          ],
          [
            "preevent",
            2
          ],
          [
            "triggered",
            3
          ],
          [
            "complete",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition>The value of this object reflects the state of the recording located in this row. Value Description available this row is available for a new recording to be initiated for this recording class. When a recording is cleared, the value is set to available preevent the recording defined by recConfigID is collecting pre-event record entries. Note: If the trigger point is set to zero (0) percent or the trigger condition is already satisfied when the recConfigID is configured, then the value transitions straight from available to triggered. triggered the recording defined by recConfigID has triggered and is now collecting post event records. If the trigger point was set to 100 percent, then the value transitions straight from preevent to complete. If a recording was triggered and the device experienced a power failure, then upon power restoration it shall change the value to complete. Triggered recordings shall survive a power outage. complete the recording defined by recConfigID is now complete (i.e. collected all of its post events) and ready for retrieval. Completed recordings shall survive a power outage. <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.9.1.6"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1206)

Schopp Bruce J.

Siblings (7)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1206.4.1.1.7.9.9.1.1 recordingClass00
1.3.6.1.4.1.1206.4.1.1.7.9.9.1.2 recordingNumber00
1.3.6.1.4.1.1206.4.1.1.7.9.9.1.3 recordingID00
1.3.6.1.4.1.1206.4.1.1.7.9.9.1.4 recordingConfigID00
1.3.6.1.4.1.1206.4.1.1.7.9.9.1.5 recordingTriggerTime00
1.3.6.1.4.1.1206.4.1.1.7.9.9.1.7 recordingTriggerRecNum00
1.3.6.1.4.1.1206.4.1.1.7.9.9.1.8 recordingNumEntries00