Status in source: mandatory.
Names: phaseControlGroupForceOff
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"phaseControlGroupForceOff",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"255",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> This object is used to apply force offs on a per phase basis. When a bit = 1, the device shall activate the System Phase Force Off control for that phase. When a bit = 0, the device shall not activate the System Phase Force Off control for that phase. When the phase green terminates, the associated bit shall be reset to 0. Bit 7: Phase # = (phaseControlGroupNumber * 8) Bit 6: Phase # = (phaseControlGroupNumber * 8) - 1 Bit 5: Phase # = (phaseControlGroupNumber * 8) - 2 Bit 4: Phase # = (phaseControlGroupNumber * 8) - 3 Bit 3: Phase # = (phaseControlGroupNumber * 8) - 4 Bit 2: Phase # = (phaseControlGroupNumber * 8) - 5 Bit 1: Phase # = (phaseControlGroupNumber * 8) - 6 Bit 0: Phase # = (phaseControlGroupNumber * 8) - 7 The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.5.1.5\"",
"::=",
"{",
"phaseControlGroupEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> This object is used to apply force offs on a per phase basis. When a bit = 1, the device shall activate the System Phase Force Off control for that phase. When a bit = 0, the device shall not activate the System Phase Force Off control for that phase. When the phase green terminates, the associated bit shall be reset to 0. Bit 7: Phase # = (phaseControlGroupNumber * 8) Bit 6: Phase # = (phaseControlGroupNumber * 8) - 1 Bit 5: Phase # = (phaseControlGroupNumber * 8) - 2 Bit 4: Phase # = (phaseControlGroupNumber * 8) - 3 Bit 3: Phase # = (phaseControlGroupNumber * 8) - 4 Bit 2: Phase # = (phaseControlGroupNumber * 8) - 5 Bit 1: Phase # = (phaseControlGroupNumber * 8) - 6 Bit 0: Phase # = (phaseControlGroupNumber * 8) - 7 The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.1.5.1.5"
],
null,
null,
null,
null
]
}
- NTCIP published standard MIB annexes (reviewed modules)
· Publisher's source file: NTCIP 1202 v03A, Object Definitions for Actuated Signal Controllers (ASC) Interface Published May 2019 — original PDF
· Official record
Module: NTCIP1202-v03
See published definition above
Module imports
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v0328A.pdf — NTCIP1202-v03 (MIB transcription)
Related source files and packages: