Status in source: mandatory.
Names: ascIOactivateRequirement
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ascIOactivateRequirement",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"255",
")",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> This object returns the conditions under which an ASC will confirm a DB transaction that activates a new I/O map or edits the currently active I/O map. The requirements are selected in a bitmap format: Bit 0 - cabinetDoorOpen -- I/O input cabinetDoorOpen active Bit 1 - inFlash -- in any flash state Bit 2 - allRedFlash -- in programmed all red flash Bit 3 - cabinetFlash -- in CVM flash, input localFlashSense active Bit 4 - restart -- changes take effect only after a restart Bit 5 - reserved Bit 6 - reserved Bit 7 - reserved Note: if all I/O mapping values being set are the same as the current values, the DB transaction shall succeed without requiring any conditions set by this object. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.13.1.3 <Object Type> S\"",
"::=",
"{",
"ascIOmapControl",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> This object returns the conditions under which an ASC will confirm a DB transaction that activates a new I/O map or edits the currently active I/O map. The requirements are selected in a bitmap format: Bit 0 - cabinetDoorOpen -- I/O input cabinetDoorOpen active Bit 1 - inFlash -- in any flash state Bit 2 - allRedFlash -- in programmed all red flash Bit 3 - cabinetFlash -- in CVM flash, input localFlashSense active Bit 4 - restart -- changes take effect only after a restart Bit 5 - reserved Bit 6 - reserved Bit 7 - reserved Note: if all I/O mapping values being set are the same as the current values, the DB transaction shall succeed without requiring any conditions set by this object. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.13.1.3 <Object Type> S"
],
null,
null,
null,
null
]
}
- NTCIP published standard MIB annexes (reviewed modules)
· Publisher's source file: NTCIP 1202 v03b NTCIP 1202 v02, Object Definitions for Actuated Traffic Signal Controller (ASC) Units – version 03b Published October 2023 — original PDF
· Official record
Module: NTCIP1202-v03
See published definition above
Module imports
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v03.35e-aspublished.pdf — NTCIP1202-v03 (MIB transcription)
Related source files and packages: