agencySignalStateOptions

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "agencySignalStateOptions",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "65535",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Additional parameters for determining the movement phase state to broadcast in a SPaT message ( 0 = FALSE/Disabled, 1 = TRUE/Enabled ) Bit 15: Reserved Bit 14: Reserved Bit 13: Reserved Bit 12: Reserved Bit 10: Reserved Bit 11: Reserved Bit 9: The signalGroupPermissiveControlSource / signalGroupPermissiveControlType indication is Flashing Red. Bit 8: The signalGroupPermissiveControlSource / signalGroupPermissiveControlType indication is Flashing Yellow. Bit 7: The signalGroupPermissiveControlSource / signalGroupPermissiveControlType indication is Green. Bit 6: The signalGroupPermissiveControlSource / signalGroupPermissiveControlType indication is Yellow. Bit 5: The signalGroupPermissiveControlSource / signalGroupPermissiveControlType indication is Red. Bit 4: Protected Green - If Bit 1 is TRUE, the signal group is configured in the signalGroupEntryTable with a signalGroupGreenType of protectedMovementAllowed (4) or protectedPermissive (5). Bit 3: Permissive Green - If Bit 1 is TRUE, the signal group is configured in the signalGroupEntryTable with a signalGroupGreenType of permissiveMovementAllowed (3) or protectedPermissive (5). Bit 2: preMovement Green - If Bit 1 is TRUE, the signal group is configured in the signalGroupEntryTable with a signalGroupGreenType is preMovement (2). Not used in the US. Bit 1: stopAndRemain - If Bit 1 is TRUE, the signal group is configured in the signalGroupEntryTable with a signalGroupRedType of stopAndRemain (3). Bit 0: stopThenProceed - If Bit 1 is TRUE, the signal group is configured in the signalGroupEntryTable with a signalGroupRedType of stopThenProceed (2). If both Bits 0 and 1 are FALSE, then the signalGroupRedType is not applicable. Bits 0 and 1 cannot be both TRUE. A SET of both bits 0 and 1 to TRUE shall result return a badValue(3) error. If both Bits 3 and 4 are FALSE, then the signalGroupGreenType is not applicable. If only Bit 3 is TRUE, then the signalGroupGreenType for the the signal group in the signalGroupEntryTable is permissiveMovementAllowed (3). If only Bit 4 is TRUE, then the signalGroupGreenType for the signal group in the signalGroupEntryTable is protectedMovementAllowed (4). If both Bits 3 and 4 are TRUE, that indicates the signalGroupGreenType is protectedPermissive and the signal indication of signalGroupPermissiveControlType and signalGroupPermissiveControlSource determines if the signal green type is permissiveMovementAllowed or protectedMovementAllowed. Bits 5-9 determine what signal indication(s) of the signalGroupPermissiveControlType / signalGroupPermissiveControlSource makes the movement permissive. If Bits 5-9 are all TRUE, then ANY signal indication of the signalGroupPermissiveControlType / signalGroupPermissiveControlSource determines if the movement is permissive. If Bits 5-9 are all FALSE, then the color of the signalGroupPermissiveControlType / signalGroupPermissiveControlSource is not applicable. See Annex F.3.3.5.2 and F.3.3.5.3 for additional guidance. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.16.12.1.4 <Object Type> P\"",
    "::=",
    "{",
    "agencySignalStateEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            65535
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Additional parameters for determining the movement phase state to broadcast in a SPaT message ( 0 = FALSE/Disabled, 1 = TRUE/Enabled ) Bit 15: Reserved Bit 14: Reserved Bit 13: Reserved Bit 12: Reserved Bit 10: Reserved Bit 11: Reserved Bit 9: The signalGroupPermissiveControlSource / signalGroupPermissiveControlType indication is Flashing Red. Bit 8: The signalGroupPermissiveControlSource / signalGroupPermissiveControlType indication is Flashing Yellow. Bit 7: The signalGroupPermissiveControlSource / signalGroupPermissiveControlType indication is Green. Bit 6: The signalGroupPermissiveControlSource / signalGroupPermissiveControlType indication is Yellow. Bit 5: The signalGroupPermissiveControlSource / signalGroupPermissiveControlType indication is Red. Bit 4: Protected Green - If Bit 1 is TRUE, the signal group is configured in the signalGroupEntryTable with a signalGroupGreenType of protectedMovementAllowed (4) or protectedPermissive (5). Bit 3: Permissive Green - If Bit 1 is TRUE, the signal group is configured in the signalGroupEntryTable with a signalGroupGreenType of permissiveMovementAllowed (3) or protectedPermissive (5). Bit 2: preMovement Green - If Bit 1 is TRUE, the signal group is configured in the signalGroupEntryTable with a signalGroupGreenType is preMovement (2). Not used in the US. Bit 1: stopAndRemain - If Bit 1 is TRUE, the signal group is configured in the signalGroupEntryTable with a signalGroupRedType of stopAndRemain (3). Bit 0: stopThenProceed - If Bit 1 is TRUE, the signal group is configured in the signalGroupEntryTable with a signalGroupRedType of stopThenProceed (2). If both Bits 0 and 1 are FALSE, then the signalGroupRedType is not applicable. Bits 0 and 1 cannot be both TRUE. A SET of both bits 0 and 1 to TRUE shall result return a badValue(3) error. If both Bits 3 and 4 are FALSE, then the signalGroupGreenType is not applicable. If only Bit 3 is TRUE, then the signalGroupGreenType for the the signal group in the signalGroupEntryTable is permissiveMovementAllowed (3). If only Bit 4 is TRUE, then the signalGroupGreenType for the signal group in the signalGroupEntryTable is protectedMovementAllowed (4). If both Bits 3 and 4 are TRUE, that indicates the signalGroupGreenType is protectedPermissive and the signal indication of signalGroupPermissiveControlType and signalGroupPermissiveControlSource determines if the signal green type is permissiveMovementAllowed or protectedMovementAllowed. Bits 5-9 determine what signal indication(s) of the signalGroupPermissiveControlType / signalGroupPermissiveControlSource makes the movement permissive. If Bits 5-9 are all TRUE, then ANY signal indication of the signalGroupPermissiveControlType / signalGroupPermissiveControlSource determines if the movement is permissive. If Bits 5-9 are all FALSE, then the color of the signalGroupPermissiveControlType / signalGroupPermissiveControlSource is not applicable. See Annex F.3.3.5.2 and F.3.3.5.3 for additional guidance. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.16.12.1.4 <Object Type> P"
    ],
    null,
    null,
    null,
    null
  ]
}