Status in source: deprecated.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ascCvDetectorFlags",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"255",
")",
"ACCESS",
"read-write",
"STATUS",
"deprecated",
"DESCRIPTION",
"\"<Definition> To support SAE J2735, this object represents a filter for the event flags and brake status of a connected vehicle that this connected vehicle detection zone applies to. If a value is set to true (set to 1), this indicates that only basic safety messages whose event flag status is also true will result in an actuation, will be exchanged, or will be stored (as appropriate) for that connected device detection zone. If multiple values are set to true, then any basic safety messages that satisfy ANY ONE of those values will result in an actuation, exchanged, or stored (i.e., this is an OR object). Bit 15: braking active Bit 14: brake boost assist engaged Bit 13: auxiliary brake engaged Bit 12: Air bags deployed Bit 11: Vehicle disabled Bit 10: Flat tire Bit 9: Status of wiper (front or back) changed within last the 2 seconds Bit 8: Status of the exterior lights changed within the last 2 seconds Bit 7: Hard braking (greater than 0.4 g) Bit 6: Reserved Bit 5: Carrying hazardous materials and placarded as such Bit 4: Stability control active and exceeding 100 mSec Bit 3: Traction control active and exceeding 100 mSec Bit 2: Anti Lock Brakes active and exceeding 100 mSec Bit 1: Stop line violation Bit 0: Hazard lights are active <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.17.2.3.1.13\"",
"REFERENCE",
"\"SAE J2735 DF_BrakeSystemStatus DE_VehicleEventFlags\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"ascCvDetectorEntry",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"deprecated"
],
[
"DESCRIPTION",
"<Definition> To support SAE J2735, this object represents a filter for the event flags and brake status of a connected vehicle that this connected vehicle detection zone applies to. If a value is set to true (set to 1), this indicates that only basic safety messages whose event flag status is also true will result in an actuation, will be exchanged, or will be stored (as appropriate) for that connected device detection zone. If multiple values are set to true, then any basic safety messages that satisfy ANY ONE of those values will result in an actuation, exchanged, or stored (i.e., this is an OR object). Bit 15: braking active Bit 14: brake boost assist engaged Bit 13: auxiliary brake engaged Bit 12: Air bags deployed Bit 11: Vehicle disabled Bit 10: Flat tire Bit 9: Status of wiper (front or back) changed within last the 2 seconds Bit 8: Status of the exterior lights changed within the last 2 seconds Bit 7: Hard braking (greater than 0.4 g) Bit 6: Reserved Bit 5: Carrying hazardous materials and placarded as such Bit 4: Stability control active and exceeding 100 mSec Bit 3: Traction control active and exceeding 100 mSec Bit 2: Anti Lock Brakes active and exceeding 100 mSec Bit 1: Stop line violation Bit 0: Hazard lights are active <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.17.2.3.1.13"
],
[
"REFERENCE",
"SAE J2735 DF_BrakeSystemStatus DE_VehicleEventFlags"
],
null,
null,
[
"DEFVAL",
0
]
]
}