Status in source: optional.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"vehicleDetectorOptions",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"255",
")",
"ACCESS",
"read-write",
"STATUS",
"optional",
"DESCRIPTION",
"\"<Definition> Vehicle Detector Options Parameter as follows (0=Disabled, 1=Enabled): Bit 7: Call - if Enabled, the CU shall place a demand for vehicular service on the assigned phase when the phase is not timing the green interval and an actuation is present. Bit 6: Queue - if Enabled, the CU shall extend the green interval of the assigned phase until a gap occurs (no actuation) or until the green has been active longer than the vehicleDetectorQueueLimit time. This is optional. Bit 5: AddedInitial - if Enabled, the CU shall accumulate detector actuation counts for use in the added initial calculations. Counts shall be accumulated from the beginning of the yellow interval to the beginning of the green interval. Bit 4: Passage - if Enabled, the CU shall maintain a reset to the associated phase passage timer for the duration of the detector actuation when the phase is green. Bit 3: Red Lock Call - if Enabled, the detector will lock a call to the assigned phase if an actuation occurs while the phase is not timing Green or Yellow. This mode is optional. Bit 2: Yellow Lock Call - if Enabled, the detector will lock a call to the assigned phase if an actuation occurs while the phase is not timing Green. Bit 1: Occupancy Detector - if Enabled, the detector collects data for the associated detector occupancy object(s). This capability may not be supported on all detector inputs to a device. Bit 0: Volume Detector - if Enabled, the detector collects data for the associated detector volume object(s). This capability may not be supported on all detector inputs to a device. A SET of both bits 2 & 3 = 1 shall result in bit 2=1 and bit 3=0. <DescriptiveName> NTCIP-1202::ASC.vehicleDetectorOptions <DataConceptType> Data Element\"",
"::=",
"{",
"vehicleDetectorEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"optional"
],
[
"DESCRIPTION",
"<Definition> Vehicle Detector Options Parameter as follows (0=Disabled, 1=Enabled): Bit 7: Call - if Enabled, the CU shall place a demand for vehicular service on the assigned phase when the phase is not timing the green interval and an actuation is present. Bit 6: Queue - if Enabled, the CU shall extend the green interval of the assigned phase until a gap occurs (no actuation) or until the green has been active longer than the vehicleDetectorQueueLimit time. This is optional. Bit 5: AddedInitial - if Enabled, the CU shall accumulate detector actuation counts for use in the added initial calculations. Counts shall be accumulated from the beginning of the yellow interval to the beginning of the green interval. Bit 4: Passage - if Enabled, the CU shall maintain a reset to the associated phase passage timer for the duration of the detector actuation when the phase is green. Bit 3: Red Lock Call - if Enabled, the detector will lock a call to the assigned phase if an actuation occurs while the phase is not timing Green or Yellow. This mode is optional. Bit 2: Yellow Lock Call - if Enabled, the detector will lock a call to the assigned phase if an actuation occurs while the phase is not timing Green. Bit 1: Occupancy Detector - if Enabled, the detector collects data for the associated detector occupancy object(s). This capability may not be supported on all detector inputs to a device. Bit 0: Volume Detector - if Enabled, the detector collects data for the associated detector volume object(s). This capability may not be supported on all detector inputs to a device. A SET of both bits 2 & 3 = 1 shall result in bit 2=1 and bit 3=0. <DescriptiveName> NTCIP-1202::ASC.vehicleDetectorOptions <DataConceptType> Data Element"
],
null,
null,
null,
null
]
}