Status in source: mandatory.
Names: volumeOccupancyPeriodV3
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"volumeOccupancyPeriodV3",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"65535",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> This object indicates the number of seconds (0-3600 seconds) that comprise the Volume/Occupancy/Speed collection period. When the collection period expires the device shall increment the volumeOccupancySequence, update the volumeOccupancyTable entries and reset the volume occupancy timer. If the value is 0, the value in volumeOccupancyPeriod is used if indicated (has a valid non-zero value). If both the volumeOccupancyPeriod and volumeOccupancyPeriodV3 are 0, then no sampling is to be performed. If both the volumeOccupancyPeriod and volumeOccupancyPeriodV3 are non-zero then the volumeOccupancyPeriod takes precedence. A value of 65535 indicates that the sample period equal to current cycle length recorded at local zero. If the sample period is configured to use the cycle length but the ASC is running in Free mode, then no data collection is performed. Value Indication 0 Value of volumeOccupancyPeriod is used if indicated 1-3600 Volume/Occupancy/Speed period in seconds 3601-65534 Reserved 65535 Sample period is same as cycle period recorded at local zero. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.2.5.5 <Unit> second\"",
"::=",
"{",
"volumeOccupancyReport",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> This object indicates the number of seconds (0-3600 seconds) that comprise the Volume/Occupancy/Speed collection period. When the collection period expires the device shall increment the volumeOccupancySequence, update the volumeOccupancyTable entries and reset the volume occupancy timer. If the value is 0, the value in volumeOccupancyPeriod is used if indicated (has a valid non-zero value). If both the volumeOccupancyPeriod and volumeOccupancyPeriodV3 are 0, then no sampling is to be performed. If both the volumeOccupancyPeriod and volumeOccupancyPeriodV3 are non-zero then the volumeOccupancyPeriod takes precedence. A value of 65535 indicates that the sample period equal to current cycle length recorded at local zero. If the sample period is configured to use the cycle length but the ASC is running in Free mode, then no data collection is performed. Value Indication 0 Value of volumeOccupancyPeriod is used if indicated 1-3600 Volume/Occupancy/Speed period in seconds 3601-65534 Reserved 65535 Sample period is same as cycle period recorded at local zero. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.2.5.5 <Unit> second"
],
null,
null,
null,
null
]
}
- NTCIP published standard MIB annexes (reviewed modules)
· Publisher's source file: NTCIP 1202 v03A, Object Definitions for Actuated Signal Controllers (ASC) Interface Published May 2019 — original PDF
· Official record
Module: NTCIP1202-v03
See published definition above
Module imports
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v0328A.pdf — NTCIP1202-v03 (MIB transcription)
Related source files and packages: