OID reference
1.3.6.1.4.1.1206.4.2.1.6.2.1.26
<Definition> This object is used to configure the sequenceNumber to run during the preempt's dwell duration. This value shall not exceed the maxSequences object value. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.6.2.1.26 <Unit> sequence
Identification
{1 3 6 1 4 1 1206 4 2 1 6 2 1 26}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In NTCIP1202-v03, the row index preemptNumber is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.1206.4.2.1.6.2.1.26.<preemptNumber>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.1.6.2.1.26
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
preemptSequenceNumber OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION "<Definition> This object is used to configure the
sequenceNumber to run during the preempt's dwell duration. This
value shall not exceed the maxSequences object value.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.1.6.2.1.26
<Unit> sequence"
::= { preemptEntry 26 }preemptSequenceNumber OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION "<Definition> This object is used to configure the
sequenceNumber to run during the preempt's dwell duration. This
value shall not exceed the maxSequences object value.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.1.6.2.1.26
<Object Type> P
<Unit> sequence"
::= { preemptEntry 26 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
<Definition> This object is used to configure the sequenceNumber to run during the preempt's dwell duration. This value shall not exceed the maxSequences object value. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.6.2.1.26 <Unit> sequence
NTCIP published standard MIB annexes (reviewed modules)
Description 2
<Definition> This object is used to configure the sequenceNumber to run during the preempt's dwell duration. This value shall not exceed the maxSequences object value. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.6.2.1.26 <Object Type> P <Unit> sequence
NTCIP published standard MIB annexes (reviewed modules)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: preemptSequenceNumber
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"preemptSequenceNumber",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"255",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> This object is used to configure the sequenceNumber to run during the preempt's dwell duration. This value shall not exceed the maxSequences object value. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.6.2.1.26 <Unit> sequence\"",
"::=",
"{",
"preemptEntry",
"26",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> This object is used to configure the sequenceNumber to run during the preempt's dwell duration. This value shall not exceed the maxSequences object value. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.6.2.1.26 <Unit> sequence"
],
null,
null,
null,
null
]
}Module: NTCIP1202-v03
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v0328A.pdf — NTCIP1202-v03 (MIB transcription)Related source files and packages:
Status in source: mandatory.
Names: preemptSequenceNumber
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"preemptSequenceNumber",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"255",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> This object is used to configure the sequenceNumber to run during the preempt's dwell duration. This value shall not exceed the maxSequences object value. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.6.2.1.26 <Object Type> P <Unit> sequence\"",
"::=",
"{",
"preemptEntry",
"26",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> This object is used to configure the sequenceNumber to run during the preempt's dwell duration. This value shall not exceed the maxSequences object value. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.6.2.1.26 <Object Type> P <Unit> sequence"
],
null,
null,
null,
null
]
}Module: NTCIP1202-v03
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v03.35e-aspublished.pdf — NTCIP1202-v03 (MIB transcription)Registration