OID reference
1.3.6.1.4.1.1206.4.2.1.7.2
<Definition> The value of this object shall specify the maximum number of sequence plans this device supports. <DescriptiveName> NTCIP-1202::ASC.maxSequences <DataConceptType> Data Element <Unit> sequence
Identification
{1 3 6 1 4 1 1206 4 2 1 7 2}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.1.7.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 4 distinct definitions; some records may not include a definition.
maxSequences OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS optional
DESCRIPTION
"<Definition> The value of this object shall specify
the maximum number of sequence plans this device
supports.
<DescriptiveName> NTCIP-1202::ASC.maxSequences
<DataConceptType> Data Element
<Unit> sequence"
::= { ring 2 }maxSequences OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object shall specify the maximum number of sequence plans this device
supports."
::= { ring 2 }maxSequences OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION "<Definition> The value of this object shall specify the
maximum number of sequence plans this device supports.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.1.7.2
<Object Type> S
<Unit> sequence"
::= { ring 2 }maxSequences OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION "<Definition> The value of this object shall specify the
maximum number of sequence plans this device supports.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.1.7.2
<Unit> sequence"
::= { ring 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
<Definition> The value of this object shall specify the maximum number of sequence plans this device supports. <DescriptiveName> NTCIP-1202::ASC.maxSequences <DataConceptType> Data Element <Unit> sequence
NTCIP published standard MIB annexes (reviewed modules)
Description 2
The value of this object shall specify the maximum number of sequence plans this device supports.
NTCIP published standard MIB annexes (reviewed modules)
Description 3
<Definition> The value of this object shall specify the maximum number of sequence plans this device supports. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.7.2 <Object Type> S <Unit> sequence
NTCIP published standard MIB annexes (reviewed modules)
Description 4
<Definition> The value of this object shall specify the maximum number of sequence plans this device supports. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.7.2 <Unit> sequence
NTCIP published standard MIB annexes (reviewed modules)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: optional.
Names: maxSequences
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"maxSequences",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"255",
")",
"ACCESS",
"read-only",
"STATUS",
"optional",
"DESCRIPTION",
"\"<Definition> The value of this object shall specify the maximum number of sequence plans this device supports. <DescriptiveName> NTCIP-1202::ASC.maxSequences <DataConceptType> Data Element <Unit> sequence\"",
"::=",
"{",
"ring",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"optional"
],
[
"DESCRIPTION",
"<Definition> The value of this object shall specify the maximum number of sequence plans this device supports. <DescriptiveName> NTCIP-1202::ASC.maxSequences <DataConceptType> Data Element <Unit> sequence"
],
null,
null,
null,
null
]
}Module: NTCIP1202-200x
See published definition above
{'TMIB-II': ['OwnerString', 'devices'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter']}Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB-II. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1202v0219f.pdf — NTCIP1202-200x (MIB transcription)Related source files and packages:
Status in source: mandatory.
Names: maxSequences
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"maxSequences",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"255",
")",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The value of this object shall specify the maximum number of sequence plans this device supports.\"",
"::=",
"{",
"ring",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The value of this object shall specify the maximum number of sequence plans this device supports."
],
null,
null,
null,
null
]
}Module: ASC_MIB1
See published definition above
{'TMIB': ['devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1202v0107d.pdf — ASC_MIB1 (MIB transcription)Status in source: mandatory.
Names: maxSequences
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"maxSequences",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"255",
")",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> The value of this object shall specify the maximum number of sequence plans this device supports. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.7.2 <Object Type> S <Unit> sequence\"",
"::=",
"{",
"ring",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> The value of this object shall specify the maximum number of sequence plans this device supports. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.7.2 <Object Type> S <Unit> sequence"
],
null,
null,
null,
null
]
}Module: NTCIP1202-v03
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v03.35e-aspublished.pdf — NTCIP1202-v03 (MIB transcription)Status in source: mandatory.
Names: maxSequences
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"maxSequences",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"255",
")",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> The value of this object shall specify the maximum number of sequence plans this device supports. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.7.2 <Unit> sequence\"",
"::=",
"{",
"ring",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> The value of this object shall specify the maximum number of sequence plans this device supports. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.7.2 <Unit> sequence"
],
null,
null,
null,
null
]
}Module: NTCIP1202-v03
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v0328A.pdf — NTCIP1202-v03 (MIB transcription)Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1206.4.2.1.7.1 | maxRings | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.1.7.3 | sequenceTable | 1 | 4 | |
| 1.3.6.1.4.1.1206.4.2.1.7.4 | maxRingControlGroups | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.1.7.5 | ringControlGroupTable | 1 | 10 | |
| 1.3.6.1.4.1.1206.4.2.1.7.6 | ringStatusTable | 1 | 2 |