Status in source: deprecated.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"spatStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"65535",
")",
"ACCESS",
"read-only",
"STATUS",
"deprecated",
"DESCRIPTION",
"\"<Definition> For NTCIP 1202 user clarification, if a mode is enabled or active, the associated bit shall be set to (1). The definition of the term 'recent' is defined by the system in use. Bit 0 is equal to Bit 0 of the BIT STRING of DE_IntersectionStatusObject, Bit 1 is equal to Bit 1, etc. Bit 0: Enabled when unitControlStatus is remoteManualControl (9) or localManualControl (10) Bit 1: Enabled when Bit 4: Stop Time in unitAlarmStatus2 is TRUE Bit 2: Enabled when unitFlashStatus is other (1), faultMonitor (5) or mmu (6) Bit 3: Enabled when the preemptState for any preempt is any value other than other (1), notActive (2), or notActiveWithCall (3). Bit 4: Enabled if the CU is servicing a signal priority request. Bit 5: Enabled if the CU is operating in fixedTime mode. This bit and bit 6 are mutually exclusive. Bit 6: Enabled if the CU is operating in an actuated mode. This bit and bit 5 are mutually exclusive. Bit 7: Enabled if the unitFlashStatus is automatic (3), localManual (4) or in startup (7) Bit 8: Controller failure or failure in operation. Bit 9: Reserved Bit 10: Enabled if a spatMapActivationCode value has changed within the previous two coordination cycles. Bit 11: Enabled if the current cycle is the first cycle that a new set of enabledLanesBits is used. Bit 12: Enabled if the mapActivatePlanError is any value other than none (2). Bit 13: Enabled if any spatPortStatus object is any value other than normal (3). <Object Identifier> 1.3.6.1.4.1.1206.4.2.17.1.1\"",
"REFERENCE",
"\"SAE J2735 DE_IntersectionStatusObject\"",
"::=",
"{",
"spat",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"deprecated"
],
[
"DESCRIPTION",
"<Definition> For NTCIP 1202 user clarification, if a mode is enabled or active, the associated bit shall be set to (1). The definition of the term 'recent' is defined by the system in use. Bit 0 is equal to Bit 0 of the BIT STRING of DE_IntersectionStatusObject, Bit 1 is equal to Bit 1, etc. Bit 0: Enabled when unitControlStatus is remoteManualControl (9) or localManualControl (10) Bit 1: Enabled when Bit 4: Stop Time in unitAlarmStatus2 is TRUE Bit 2: Enabled when unitFlashStatus is other (1), faultMonitor (5) or mmu (6) Bit 3: Enabled when the preemptState for any preempt is any value other than other (1), notActive (2), or notActiveWithCall (3). Bit 4: Enabled if the CU is servicing a signal priority request. Bit 5: Enabled if the CU is operating in fixedTime mode. This bit and bit 6 are mutually exclusive. Bit 6: Enabled if the CU is operating in an actuated mode. This bit and bit 5 are mutually exclusive. Bit 7: Enabled if the unitFlashStatus is automatic (3), localManual (4) or in startup (7) Bit 8: Controller failure or failure in operation. Bit 9: Reserved Bit 10: Enabled if a spatMapActivationCode value has changed within the previous two coordination cycles. Bit 11: Enabled if the current cycle is the first cycle that a new set of enabledLanesBits is used. Bit 12: Enabled if the mapActivatePlanError is any value other than none (2). Bit 13: Enabled if any spatPortStatus object is any value other than normal (3). <Object Identifier> 1.3.6.1.4.1.1206.4.2.17.1.1"
],
[
"REFERENCE",
"SAE J2735 DE_IntersectionStatusObject"
],
null,
null,
null
]
}