Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"spatStatus2",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"65535",
")",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> For NTCIP 1202 user clarification, if a mode is enabled or active, the associated bit shall be set to (1). Bit 0 is equal to Bit 0 of the BIT STRING of DE_IntersectionStatusObject, Bit 1 is equal to Bit 1, etc. Bit 0: Manual Control. Enabled when unitControlStatus is remoteManualControl (9) or localManualControl (10). Bit 1: Stop Time. Enabled when Bit 4: Stop Time in unitAlarmStatus2 is TRUE. Bit 2: Failure Flash. Enabled when unitFlashStatus is localManual (4), faultMonitor (5), or mmu (6). This bit may also be enabled if the preemptState is other (1) and indeterminate. Bit 3: Preempt. Enabled when the preemptState for any preempt is any value other than notActive (2) or notActiveWithCall (3). This bit may also be enabled if the preemptState is other (1) and determinate. Bit 4: Signal Priority. Enabled when the priorityStrategyRequestStatusInCO for any priority request is a value of requestQueued (2), or activeProcessing (4). Bit 5: Fixed Time. Enabled if the CU is operating in fixedTime mode. This bit and Bit 6 cannot both be simultaneously active. Bit 6: Traffic Dependent. Enabled if the CU is operating in an actuated mode. This bit and Bit 5 cannot both be simultaneously active. Bit 7: Standby. Enabled if the unitFlashStatus is automatic (3), startup (7), or preempt (8). Bit 8: Failure Mode. Controller failure or failure in operation. Bit 9: Reserved. SET to 0. Bit 10: Reserved. SET to 1. Bit 11: Reserved. SET to 1. Bit 12: Invalid MAP. Enabled if spatOptions Bit 2 is FALSE, or the spatPortOptions Bit 2 is FALSE. Bit 13: Invalid SPaT. Enabled if any spatPortStatus object is any value other than normal (3), if spatOptions Bit 1 is FALSE, or the spatPortOptions Bit 1 is FALSE. Bits 14-15: Reserved The default bit value for Bits 10 and 11 is enabled (1). The default bit value for all other Bits is disabled (0). See Annex F.3.3.4 for additional guidance. <Object Identifier> 1.3.6.1.4.1.1206.4.2.17.1.10 <Object Type> S\"",
"REFERENCE",
"\"SAE J2735 DE_IntersectionStatusObject\"",
"::=",
"{",
"spat",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> For NTCIP 1202 user clarification, if a mode is enabled or active, the associated bit shall be set to (1). Bit 0 is equal to Bit 0 of the BIT STRING of DE_IntersectionStatusObject, Bit 1 is equal to Bit 1, etc. Bit 0: Manual Control. Enabled when unitControlStatus is remoteManualControl (9) or localManualControl (10). Bit 1: Stop Time. Enabled when Bit 4: Stop Time in unitAlarmStatus2 is TRUE. Bit 2: Failure Flash. Enabled when unitFlashStatus is localManual (4), faultMonitor (5), or mmu (6). This bit may also be enabled if the preemptState is other (1) and indeterminate. Bit 3: Preempt. Enabled when the preemptState for any preempt is any value other than notActive (2) or notActiveWithCall (3). This bit may also be enabled if the preemptState is other (1) and determinate. Bit 4: Signal Priority. Enabled when the priorityStrategyRequestStatusInCO for any priority request is a value of requestQueued (2), or activeProcessing (4). Bit 5: Fixed Time. Enabled if the CU is operating in fixedTime mode. This bit and Bit 6 cannot both be simultaneously active. Bit 6: Traffic Dependent. Enabled if the CU is operating in an actuated mode. This bit and Bit 5 cannot both be simultaneously active. Bit 7: Standby. Enabled if the unitFlashStatus is automatic (3), startup (7), or preempt (8). Bit 8: Failure Mode. Controller failure or failure in operation. Bit 9: Reserved. SET to 0. Bit 10: Reserved. SET to 1. Bit 11: Reserved. SET to 1. Bit 12: Invalid MAP. Enabled if spatOptions Bit 2 is FALSE, or the spatPortOptions Bit 2 is FALSE. Bit 13: Invalid SPaT. Enabled if any spatPortStatus object is any value other than normal (3), if spatOptions Bit 1 is FALSE, or the spatPortOptions Bit 1 is FALSE. Bits 14-15: Reserved The default bit value for Bits 10 and 11 is enabled (1). The default bit value for all other Bits is disabled (0). See Annex F.3.3.4 for additional guidance. <Object Identifier> 1.3.6.1.4.1.1206.4.2.17.1.10 <Object Type> S"
],
[
"REFERENCE",
"SAE J2735 DE_IntersectionStatusObject"
],
null,
null,
null
]
}