pixelTestActivation

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "pixelTestActivation",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "noTest",
    "(",
    "2",
    ")",
    ",",
    "test",
    "(",
    "3",
    ")",
    ",",
    "clearTable",
    "(",
    "4",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "“",
    "Indicates",
    "the",
    "state",
    "of",
    "the",
    "pixel",
    "testing",
    ".",
    "The",
    "actual",
    "test",
    "routine",
    "can",
    "vary",
    "among",
    "different",
    "manufacturers",
    ".",
    "The",
    "results",
    "of",
    "the",
    "pixel",
    "failure",
    "test",
    "shall",
    "be",
    "stored",
    "in",
    "the",
    "pixel",
    "failure",
    "table",
    ".",
    "The",
    "pixel",
    "failure",
    "table",
    "will",
    "be",
    "cleared",
    ",",
    "when",
    "a",
    "pixel",
    "test",
    "is",
    "started",
    "(",
    "test",
    ")",
    ".",
    "Setting",
    "the",
    "value",
    "to",
    "test",
    "will",
    "start",
    "the",
    "test",
    ",",
    "meaning",
    "this",
    "test",
    "will",
    "be",
    "executed",
    "once",
    ".",
    "The",
    "sign",
    "controller",
    "will",
    "automatically",
    "set",
    "the",
    "value",
    "of",
    "this",
    "object",
    "back",
    "to",
    "noTest",
    "after",
    "completion",
    ".",
    "”",
    "::=",
    "{",
    "statError",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "noTest",
            2
          ],
          [
            "test",
            3
          ],
          [
            "clearTable",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. The pixel failure table will be cleared, when a pixel test is started (test). Setting the value to test will start the test, meaning this test will be executed once. The sign controller will automatically set the value of this object back to noTest after completion."
    ],
    null,
    null,
    null,
    null
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "pixelTestActivation",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "noTest",
    "(",
    "2",
    ")",
    ",",
    "test",
    "(",
    "3",
    ")",
    ",",
    "clearTable",
    "(",
    "4",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. The pixel failure table, pixelFailureTableNumRows objects are cleared (both messageDisplay and pixelTest types), when a pixel test is started (test) or a table is cleared (clearTable). Setting the value to test starts the test, meaning this test is executed once. Pixel failures identified by setting this object to test are entered into the pixelTest type of the pixelFailureDetectionType. The sign controller automatically sets the value of this object back to noTest after completion. <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.4\"",
    "DEFVAL",
    "{",
    "noTest",
    "}",
    "::=",
    "{",
    "statError",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "noTest",
            2
          ],
          [
            "test",
            3
          ],
          [
            "clearTable",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. The pixel failure table, pixelFailureTableNumRows objects are cleared (both messageDisplay and pixelTest types), when a pixel test is started (test) or a table is cleared (clearTable). Setting the value to test starts the test, meaning this test is executed once. Pixel failures identified by setting this object to test are entered into the pixelTest type of the pixelFailureDetectionType. The sign controller automatically sets the value of this object back to noTest after completion. <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.4"
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "noTest"
    ]
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "pixelTestActivation",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "noTest",
    "(",
    "2",
    ")",
    ",",
    "test",
    "(",
    "3",
    ")",
    ",",
    "clearTable",
    "(",
    "4",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. The pixel failure table, pixelFailureTableNumRows objects will be cleared (both messageDisplay and pixelTest types), when a pixel test is started (test) or a table is cleared (clearTable). Setting the value to test will start the test, meaning this test will be executed once. Pixel failures identified by setting this object to test are entered into the pixelTest type of the pixelFailureDetectionType. The sign controller will automatically set the value of this object back to noTest after completion. Page 201 NTCIP 1203 v02.35 <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.4\"",
    "DEFVAL",
    "{",
    "noTest",
    "}",
    "::=",
    "{",
    "statError",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "noTest",
            2
          ],
          [
            "test",
            3
          ],
          [
            "clearTable",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. The pixel failure table, pixelFailureTableNumRows objects will be cleared (both messageDisplay and pixelTest types), when a pixel test is started (test) or a table is cleared (clearTable). Setting the value to test will start the test, meaning this test will be executed once. Pixel failures identified by setting this object to test are entered into the pixelTest type of the pixelFailureDetectionType. The sign controller will automatically set the value of this object back to noTest after completion. Page 201 NTCIP 1203 v02.35 <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.4"
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "noTest"
    ]
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "pixelTestActivation",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "noTest",
    "(",
    "2",
    ")",
    ",",
    "test",
    "(",
    "3",
    ")",
    ",",
    "clearTable",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"<Definition> Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. <Format> other: the meaning of this value is not defined in this document; this value was deprecated in NTCIP 1203 v02. noTest: Receiving this value in response to a GetRequest indicates that the sign is not currently undergoing a pixel test. The value 'noTest' is not valid in a SetRequest. test: Setting the value to 'test' clears both the pixel failure table and the pixelFailureTableNumRows object (for both 'messageDisplay' and 'pixelTest' types) and starts the pixel test, meaning this test is executed once. Pixel failures identified by this test are entered into the pixelFailureTable with pixelFailureDetectionType equal to 'pixelTest'. The sign controller automatically sets the value of this object back to 'noTest' after completion. Receiving this value in response to a GetRequest indicates that the sign is still undergoing a previous test. clearTable: Setting the value to 'clearTable' clears both the pixel failure table and the pixelFailureTableNumRows object for both 'messageDisplay' and 'pixelTest' types. The sign controller automatically sets the value of this object back to 'noTest' after completion. Receiving this value in response to a GetRequest indicates that the sign is still clearing the table from a previous command. <Informative> Versions of this object prior to NTCIP 1203 v04 were ambiguous regarding (1) the device transitioning the value 'clearTable' to 'noTest' once the table was cleared, (2) the possibility of using the 'noTest' value in a SetRequest, and (3) the meaning of a 'clearTable' value in a response to a GetRequest. In v02, the enumerated value of 'other' is RETIRED to improve interoperability. <Parameter Type> Control <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.4\"",
    "DEFVAL",
    "{",
    "noTest",
    "}",
    "::=",
    "{",
    "statError",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "noTest",
            2
          ],
          [
            "test",
            3
          ],
          [
            "clearTable",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "<Definition> Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. <Format> other: the meaning of this value is not defined in this document; this value was deprecated in NTCIP 1203 v02. noTest: Receiving this value in response to a GetRequest indicates that the sign is not currently undergoing a pixel test. The value 'noTest' is not valid in a SetRequest. test: Setting the value to 'test' clears both the pixel failure table and the pixelFailureTableNumRows object (for both 'messageDisplay' and 'pixelTest' types) and starts the pixel test, meaning this test is executed once. Pixel failures identified by this test are entered into the pixelFailureTable with pixelFailureDetectionType equal to 'pixelTest'. The sign controller automatically sets the value of this object back to 'noTest' after completion. Receiving this value in response to a GetRequest indicates that the sign is still undergoing a previous test. clearTable: Setting the value to 'clearTable' clears both the pixel failure table and the pixelFailureTableNumRows object for both 'messageDisplay' and 'pixelTest' types. The sign controller automatically sets the value of this object back to 'noTest' after completion. Receiving this value in response to a GetRequest indicates that the sign is still clearing the table from a previous command. <Informative> Versions of this object prior to NTCIP 1203 v04 were ambiguous regarding (1) the device transitioning the value 'clearTable' to 'noTest' once the table was cleared, (2) the possibility of using the 'noTest' value in a SetRequest, and (3) the meaning of a 'clearTable' value in a response to a GetRequest. In v02, the enumerated value of 'other' is RETIRED to improve interoperability. <Parameter Type> Control <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.4"
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "noTest"
    ]
  ]
}