lampTestActivation

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "lampTestActivation",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "noTest",
    "(",
    "2",
    ")",
    ",",
    "test",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "deprecated",
    "DESCRIPTION",
    "\"<Definition> Indicates the state of the lamp testing. The actual test routine can vary among different manufacturers. The results of the lamp failure test shall be stored appropriately, in the lampFailureStuckOn- and/or in the lampFailureStuckOff-objects. In v02, the enumerated value of 'other' was deprecated to improve interoperability. Setting the value to test starts the test, meaning this test is executed once. The sign controller shall automatically set the value of this object back to noTest after completion. Activation of lamp test shall clear the object lampFailureStuckOn and lampFailureStuckOff, the lamp status table, and the 'lamp fail' error bit in shortErrorStatus. Results of the lamp test shall update these two objects, the table and the error bit. <Superseded by> ISO26048-1-Srsa:fdSrsaTypeTestActivation.MLS <Informative> This object was deprecated in NTCIP 1203 v04 and replaced with the more universal SRSA object. <Parameter Type> Control <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.7\"",
    "DEFVAL",
    "{",
    "noTest",
    "}",
    "::=",
    "{",
    "statError",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "noTest",
            2
          ],
          [
            "test",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "deprecated"
    ],
    [
      "DESCRIPTION",
      "<Definition> Indicates the state of the lamp testing. The actual test routine can vary among different manufacturers. The results of the lamp failure test shall be stored appropriately, in the lampFailureStuckOn- and/or in the lampFailureStuckOff-objects. In v02, the enumerated value of 'other' was deprecated to improve interoperability. Setting the value to test starts the test, meaning this test is executed once. The sign controller shall automatically set the value of this object back to noTest after completion. Activation of lamp test shall clear the object lampFailureStuckOn and lampFailureStuckOff, the lamp status table, and the 'lamp fail' error bit in shortErrorStatus. Results of the lamp test shall update these two objects, the table and the error bit. <Superseded by> ISO26048-1-Srsa:fdSrsaTypeTestActivation.MLS <Informative> This object was deprecated in NTCIP 1203 v04 and replaced with the more universal SRSA object. <Parameter Type> Control <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.7"
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "noTest"
    ]
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "lampTestActivation",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "noTest",
    "(",
    "2",
    ")",
    ",",
    "test",
    "(",
    "3",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "“",
    "Indicates",
    "the",
    "state",
    "of",
    "the",
    "lamp",
    "testing",
    ".",
    "The",
    "actual",
    "test",
    "routine",
    "can",
    "vary",
    "among",
    "different",
    "manufacturers",
    ".",
    "The",
    "results",
    "of",
    "the",
    "lamp",
    "failure",
    "test",
    "shall",
    "be",
    "stored",
    "appropriately",
    ",",
    "either",
    "in",
    "the",
    "lampFailureStuckOn-",
    "or",
    "in",
    "the",
    "lampFailureStuckOff-objects",
    ".",
    "Setting",
    "the",
    "value",
    "to",
    "test",
    "will",
    "start",
    "the",
    "test",
    ",",
    "meaning",
    "this",
    "test",
    "will",
    "be",
    "executed",
    "once",
    ".",
    "The",
    "sign",
    "controller",
    "shall",
    "automatically",
    "set",
    "the",
    "value",
    "of",
    "this",
    "object",
    "back",
    "to",
    "noTest",
    "after",
    "completion",
    ".",
    "”",
    "::=",
    "{",
    "statError",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "noTest",
            2
          ],
          [
            "test",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "Indicates the state of the lamp testing. The actual test routine can vary among different manufacturers. The results of the lamp failure test shall be stored appropriately, either in the lampFailureStuckOn- or in the lampFailureStuckOff-objects. Setting the value to test will start the test, meaning this test will be executed once. The sign controller shall automatically set the value of this object back to noTest after completion."
    ],
    null,
    null,
    null,
    null
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "lampTestActivation",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "noTest",
    "(",
    "2",
    ")",
    ",",
    "test",
    "(",
    "3",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Indicates the state of the lamp testing. The actual test routine can vary among different manufacturers. The results of the lamp failure test shall be stored appropriately, in the lampFailureStuckOn- and/or in the lampFailureStuckOff-objects. Setting the value to test will start the test, meaning this test will be executed once. The sign controller shall automatically set the value of this object back to noTest after completion. Activation of lamp test shall clear the object lampFailureStuckOn and lampFailureStuckOff, the lamp status table, and the 'lamp fail' error bit in shortErrorStatus. Results of the lamp test should update these two objects, the table and the error bit. <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.7\"",
    "DEFVAL",
    "{",
    "noTest",
    "}",
    "::=",
    "{",
    "statError",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "noTest",
            2
          ],
          [
            "test",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Indicates the state of the lamp testing. The actual test routine can vary among different manufacturers. The results of the lamp failure test shall be stored appropriately, in the lampFailureStuckOn- and/or in the lampFailureStuckOff-objects. Setting the value to test will start the test, meaning this test will be executed once. The sign controller shall automatically set the value of this object back to noTest after completion. Activation of lamp test shall clear the object lampFailureStuckOn and lampFailureStuckOff, the lamp status table, and the 'lamp fail' error bit in shortErrorStatus. Results of the lamp test should update these two objects, the table and the error bit. <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.7"
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "noTest"
    ]
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "lampTestActivation",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "noTest",
    "(",
    "2",
    ")",
    ",",
    "test",
    "(",
    "3",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Indicates the state of the lamp testing. The actual test routine can vary among different manufacturers. The results of the lamp failure test shall be stored appropriately, in the lampFailureStuckOn- and/or in the lampFailureStuckOff-objects. Setting the value to test starts the test, meaning this test is executed once. The sign controller shall automatically set the value of this object back to noTest after completion. Activation of lamp test shall clear the object lampFailureStuckOn and lampFailureStuckOff, the lamp status table, and the 'lamp fail' error bit in shortErrorStatus. Results of the lamp test shall update these two objects, the table and the error bit. <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.7\"",
    "DEFVAL",
    "{",
    "noTest",
    "}",
    "::=",
    "{",
    "statError",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "noTest",
            2
          ],
          [
            "test",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Indicates the state of the lamp testing. The actual test routine can vary among different manufacturers. The results of the lamp failure test shall be stored appropriately, in the lampFailureStuckOn- and/or in the lampFailureStuckOff-objects. Setting the value to test starts the test, meaning this test is executed once. The sign controller shall automatically set the value of this object back to noTest after completion. Activation of lamp test shall clear the object lampFailureStuckOn and lampFailureStuckOff, the lamp status table, and the 'lamp fail' error bit in shortErrorStatus. Results of the lamp test shall update these two objects, the table and the error bit. <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.7"
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "noTest"
    ]
  ]
}