Status in source: deprecated.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zoneOutputExtendEnable",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"1",
")",
")",
"ACCESS",
"read-write",
"STATUS",
"deprecated",
"DESCRIPTION",
"\"<Definition> A bit-mapped value as defined below to enable and disable the extend time for the sensor zone output, as follows: <Format> bit 7 0 = NO, 1 = YES HIGH on output 1 Arming Pin to enable extend time for the zone (MSB), bit 6 0 = NO, 1 = YES HIGH on output 2 Arming Pin to enable extend time for the zone, bit 5 0 = NO, 1 = YES HIGH on output 3 Arming Pin to enable extend time for the zone, bit 4 0 = NO, 1 = YES HIGH on output 4 Arming Pin to enable extend time for the zone, bit 3 0 = NO, 1 = YES LOW on output 1 Arming Pin to enable extend time for the zone (MSB), bit 2 0 = NO, 1 = YES LOW on output 2 Arming Pin to enable extend time for the zone, bit 1 0 = NO, 1 = YES LOW on output 3 Arming Pin to enable extend time for the zone, bit 0 0 = NO, 1 = YES LOW on output 4 Arming Pin to enable extend time for the zone (LSB). Extend time is always enabled for the zone if all bits are zero (0). If this object is supported, it must use the same data that will be used by the new objects outputConditioningEntry.sensorZoneOutputExtendMode and outputConditioningEntry.sensorZoneOutputExtendEnables to the extent possible. <Object Identifier> 1.3.6.1.4.1.1206.4.2.4.4.2.1.5\"",
"REFERENCE",
"\"NEMA TS2 Clause 6.5.2.8.7, 6.5.2.24 and 6.5.2.25.6\"",
"::=",
"{",
"loopOutputConditioningEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"deprecated"
],
[
"DESCRIPTION",
"<Definition> A bit-mapped value as defined below to enable and disable the extend time for the sensor zone output, as follows: <Format> bit 7 0 = NO, 1 = YES HIGH on output 1 Arming Pin to enable extend time for the zone (MSB), bit 6 0 = NO, 1 = YES HIGH on output 2 Arming Pin to enable extend time for the zone, bit 5 0 = NO, 1 = YES HIGH on output 3 Arming Pin to enable extend time for the zone, bit 4 0 = NO, 1 = YES HIGH on output 4 Arming Pin to enable extend time for the zone, bit 3 0 = NO, 1 = YES LOW on output 1 Arming Pin to enable extend time for the zone (MSB), bit 2 0 = NO, 1 = YES LOW on output 2 Arming Pin to enable extend time for the zone, bit 1 0 = NO, 1 = YES LOW on output 3 Arming Pin to enable extend time for the zone, bit 0 0 = NO, 1 = YES LOW on output 4 Arming Pin to enable extend time for the zone (LSB). Extend time is always enabled for the zone if all bits are zero (0). If this object is supported, it must use the same data that will be used by the new objects outputConditioningEntry.sensorZoneOutputExtendMode and outputConditioningEntry.sensorZoneOutputExtendEnables to the extent possible. <Object Identifier> 1.3.6.1.4.1.1206.4.2.4.4.2.1.5"
],
[
"REFERENCE",
"NEMA TS2 Clause 6.5.2.8.7, 6.5.2.24 and 6.5.2.25.6"
],
null,
null,
null
]
}