Status in source: deprecated.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zoneOutputDelayEnable",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"1",
")",
")",
"ACCESS",
"read-write",
"STATUS",
"deprecated",
"DESCRIPTION",
"\"<Definition> A bit-mapped value as defined below to enable and disable the delay time for the sensor zone output, as follows: <Format> bit 7 0 = NO, 1 = YES HIGH on output 1 Arming Pin to enable delay time for the zone (MSB), bit 6 0 = NO, 1 = YES HIGH on output 2 Arming Pin to enable delay time for the zone, bit 5 0 = NO, 1 = YES HIGH on output 3 Arming Pin to enable delay time for the zone, bit 4 0 = NO, 1 = YES HIGH on output 4 Arming Pin to enable delay time for the zone, bit 3 0 = NO, 1 = YES LOW on output 1 Arming Pin to enable delay time for the zone (MSB), bit 2 0 = NO, 1 = YES LOW on output 2 Arming Pin to enable delay time for the zone, bit 1 0 = NO, 1 = YES LOW on output 3 Arming Pin to enable delay time for the zone, bit 0 0 = NO, 1 = YES LOW on output 4 Arming Pin to enable delay time for the zone, Delay time is always enabled for the zone if all bits are zero (0). If this object is supported, it is required to use the same data that is used by the new objects outputConditioningEntry.sensorZoneOutputDelayMode and outputConditioningEntry.sensorZoneOutputDelayEnables to the extent possible. <Object Identifier> 1.3.6.1.4.1.1206.4.2.4.4.2.1.6\"",
"REFERENCE",
"\"NEMA TS2 Clause 6.5.2.8.7, 6.5.2.24 and 6.5.2.25.6\"",
"::=",
"{",
"loopOutputConditioningEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"deprecated"
],
[
"DESCRIPTION",
"<Definition> A bit-mapped value as defined below to enable and disable the delay time for the sensor zone output, as follows: <Format> bit 7 0 = NO, 1 = YES HIGH on output 1 Arming Pin to enable delay time for the zone (MSB), bit 6 0 = NO, 1 = YES HIGH on output 2 Arming Pin to enable delay time for the zone, bit 5 0 = NO, 1 = YES HIGH on output 3 Arming Pin to enable delay time for the zone, bit 4 0 = NO, 1 = YES HIGH on output 4 Arming Pin to enable delay time for the zone, bit 3 0 = NO, 1 = YES LOW on output 1 Arming Pin to enable delay time for the zone (MSB), bit 2 0 = NO, 1 = YES LOW on output 2 Arming Pin to enable delay time for the zone, bit 1 0 = NO, 1 = YES LOW on output 3 Arming Pin to enable delay time for the zone, bit 0 0 = NO, 1 = YES LOW on output 4 Arming Pin to enable delay time for the zone, Delay time is always enabled for the zone if all bits are zero (0). If this object is supported, it is required to use the same data that is used by the new objects outputConditioningEntry.sensorZoneOutputDelayMode and outputConditioningEntry.sensorZoneOutputDelayEnables to the extent possible. <Object Identifier> 1.3.6.1.4.1.1206.4.2.4.4.2.1.6"
],
[
"REFERENCE",
"NEMA TS2 Clause 6.5.2.8.7, 6.5.2.24 and 6.5.2.25.6"
],
null,
null,
null
]
}