essReferenceHeight

Status in source: mandatory.

Names: essReferenceHeight

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "essReferenceHeight",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "-",
    "400",
    ".",
    ".",
    "8001",
    ")",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "“",
    "The",
    "reference",
    "elevation",
    "of",
    "the",
    "ESS",
    "in",
    "meters",
    "above",
    "mean",
    "sea",
    "level",
    ".",
    "For",
    "a",
    "permanent",
    "station",
    ",",
    "this",
    "height",
    "shall",
    "be",
    "measured",
    "to",
    "the",
    "base",
    "of",
    "the",
    "structure",
    ";",
    "for",
    "transportable",
    "stations",
    ",",
    "this",
    "height",
    "shall",
    "be",
    "measured",
    "to",
    "the",
    "ground",
    "surface",
    "upon",
    "which",
    "the",
    "station",
    "resides",
    ";",
    "and",
    "for",
    "mobile",
    ",",
    "this",
    "height",
    "shall",
    "be",
    "measured",
    "to",
    "the",
    "surface",
    "under",
    "the",
    "vehicle",
    ".",
    "The",
    "value",
    "8001",
    "shall",
    "indicate",
    "an",
    "missing",
    "value",
    ".",
    "”",
    "REFERENCE",
    "“",
    "Resolution",
    "based",
    "on",
    "WMO",
    "Binary",
    "Code",
    "form",
    "FM",
    "94",
    "BUFR",
    "Table",
    "B",
    "table",
    "reference",
    "descriptor",
    "0",
    "07",
    "001",
    ".",
    "”",
    "::=",
    "{",
    "essNtcipHeight",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            -400,
            8001
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "The reference elevation of the ESS in meters above mean sea level. For a permanent station, this height shall be measured to the base of the structure; for transportable stations, this height shall be measured to the ground surface upon which the station resides; and for mobile, this height shall be measured to the surface under the vehicle. The value 8001 shall indicate an missing value."
    ],
    [
      "REFERENCE",
      "Resolution based on WMO Binary Code form FM 94 BUFR Table B table reference descriptor 0 07 001."
    ],
    null,
    null,
    null
  ]
}

• NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1204:1998, Object Definitions for Environmental Sensor Stations (ESS) Published November 2001 (superceded by NTCIP 1204 v02) — original PDF · Official record

  Module: ESS-MIB

  See published definition above

  Module imports

  {'TMIB': ['devices'], 'NEMA_SMI': ['experimental'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter'], 'RFC1158-SMI': ['DisplayString']}

  Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.

  Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.

  Source data warning: A typographic closing DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.

  Source data warning: A typographic opening DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.

  Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.

  · Download NTCIP1204v0113c.pdf — ESS-MIB (MIB transcription)

  Related source files and packages:

  • NTCIP 1204:1998, Object Definitions for Environmental Sensor Stations (ESS) Published November 2001 (superceded by NTCIP 1204 v02) — original PDF
  • NTCIP 8004 v02 (2010) — normative namespace, pages 43–44
  • RFC 1155 — original SMI enterprise namespace

  Show more related files and packages

  • NTCIP8004-NEMA.mib — ITE namespace dependency
  • NTCIP8004-Transportation.mib — ITE namespace dependency

Status in source: mandatory.

Names: essReferenceHeight

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "essReferenceHeight",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "-",
    "400",
    ".",
    ".",
    "8001",
    ")",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition>The reference elevation of the ESS in meters above mean sea level. For a permanent station, this height shall be measured to the base of the structure; for transportable stations, this height shall be measured to the ground surface upon which the station resides; and for mobile, this height shall be measured to the surface under the vehicle. <SetConstraint>read-only <DescriptiveName>ESS.referenceHeight:quantity <Valid Value Rule> The value of 8001 shall indicate a missing value. <Data Concept Type>Data Element <Unit>meters\"",
    "REFERENCE",
    "\"Resolution based on WMO Binary Code Form FM 94 BUFR Table B item 0 07 001.\"",
    "::=",
    "{",
    "essNtcipHeight",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            -400,
            8001
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition>The reference elevation of the ESS in meters above mean sea level. For a permanent station, this height shall be measured to the base of the structure; for transportable stations, this height shall be measured to the ground surface upon which the station resides; and for mobile, this height shall be measured to the surface under the vehicle. <SetConstraint>read-only <DescriptiveName>ESS.referenceHeight:quantity <Valid Value Rule> The value of 8001 shall indicate a missing value. <Data Concept Type>Data Element <Unit>meters"
    ],
    [
      "REFERENCE",
      "Resolution based on WMO Binary Code Form FM 94 BUFR Table B item 0 07 001."
    ],
    null,
    null,
    null
  ]
}

• NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1204 v03, Environmental Sensor Station (ESS) Interface Protocol Published October 2009 — original PDF · Official record

  Module: NTCIP1204-v03

  See published definition above

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004v02': ['ess', 'OerString']}

  Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.

  Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.

  Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.

  · Download NTCIP1204v0308r3withErrata.pdf — NTCIP1204-v03 (MIB transcription)

  Related source files and packages:

  • NTCIP 1204 v03, Environmental Sensor Station (ESS) Interface Protocol Published October 2009 — original PDF
• NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1204 v02, Object Definitions for Environmental Sensor Station v02 Published May 2008 (superceded by NTCIP 1204 v03) — original PDF · Official record

  Module: NTCIP1204-v02

  Same published definition

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004-A-2004': ['ess', 'OerString']}

  Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.

  Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004-A-2004. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.

  · Download NTCIP1204v0224r.pdf — NTCIP1204-v02 (MIB transcription)

  Related source files and packages:

  • NTCIP 1204 v02, Object Definitions for Environmental Sensor Station v02 Published May 2008 (superceded by NTCIP 1204 v03) — original PDF

Status in source: mandatory.

Names: essReferenceHeight

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "essReferenceHeight",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "-",
    "400",
    ".",
    ".",
    "8001",
    ")",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition>The reference elevation of the ESS in meters above mean sea level. For a permanent station, this height shall be measured to the base of the structure; for transportable stations, this height shall be measured to the ground surface upon which the station resides; and for mobile, this height shall be measured to the surface under the vehicle. <DescriptiveName>ESS.referenceHeight:quantity <Valid Value Rule>The value of 8001 shall indicate a missing value. <Data Concept Type>Data Element <Unit>meters <Object Identifier> 1.3.6.1.4.1.1206.4.2.5.2.3.1\"",
    "REFERENCE",
    "\"Resolution based on WMO Binary Code Form FM 94 BUFR Table B item 0 07 001.\"",
    "::=",
    "{",
    "essNtcipHeight",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            -400,
            8001
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition>The reference elevation of the ESS in meters above mean sea level. For a permanent station, this height shall be measured to the base of the structure; for transportable stations, this height shall be measured to the ground surface upon which the station resides; and for mobile, this height shall be measured to the surface under the vehicle. <DescriptiveName>ESS.referenceHeight:quantity <Valid Value Rule>The value of 8001 shall indicate a missing value. <Data Concept Type>Data Element <Unit>meters <Object Identifier> 1.3.6.1.4.1.1206.4.2.5.2.3.1"
    ],
    [
      "REFERENCE",
      "Resolution based on WMO Binary Code Form FM 94 BUFR Table B item 0 07 001."
    ],
    null,
    null,
    null
  ]
}

• ITE public NTCIP working repository MIBs · Publisher's source file: NTCIP-1204 — NTCIP1204-Ess.mib

  Module: NTCIP1204-v04

  See published definition above

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004v02': ['ess', 'OerString']}

  Source data warning: This original is published in an ITE NTCIP working repository. Repository publication does not establish that this particular revision is an adopted standard. Consult its native revision history and the NTCIP published standards catalog before implementation. Copyright and distribution notices are retained in the downloadable original.

  Source data warning: Potentially inaccurate interpretation of historical NTCIP imports: the original references NTCIP8004v02, which is absent from the public repository snapshot. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.

  · Download NTCIP-1204 — NTCIP1204-Ess.mib
• NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1204 v0426, National Transportation Communications for ITS Protocol Environmental Sensor Station (ESS) Interface Protocol — original PDF · Official record

  Module: NTCIP1204-v04

  See published definition above

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004v02': ['ess', 'OerString']}

  Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.

  Source data warning: The published normative SMI section omits its module END. The derived parser boundary is placed immediately before section 5.17, whose text explicitly says its items are not SNMP Objects. No declaration or numeric arc is added; the complete PDF is authoritative.

  Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.

  · Download NTCIP-1204v0426b-2021_AsPublished.pdf — NTCIP1204-v04 (MIB transcription)

  Related source files and packages:

  • NTCIP 1204 v0426, National Transportation Communications for ITS Protocol Environmental Sensor Station (ESS) Interface Protocol — original PDF