OID reference
1.3.6.1.4.1.1206.4.2.5.2.9.4.1.3
<Definition>Indicates the type of subsurface. A value of air would indicate a bridge. <SetConstraint>always <DescriptiveName>SubSurfaceSensor.type:code <Data Concept Type>Data Element
Identification
{1 3 6 1 4 1 1206 4 2 5 2 9 4 1 3}
| Value | Name |
|---|---|
| 1 | other |
| 2 | unknown |
| 3 | concrete |
| 4 | asphalt |
| 5 | openGradedAsphalt |
| 6 | gravel |
| 7 | clay |
| 8 | loam |
| 9 | sand |
| 10 | permafrost |
| 11 | variousAggregates |
| 12 | air |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In NTCIP1204-v04, the row index essSubSurfaceSensorIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.1206.4.2.5.2.9.4.1.3.<essSubSurfaceSensorIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.5.2.9.4.1.3
Replace the placeholders with your connection and authentication options. Some definitions do not specify a readable access value. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 5 distinct definitions; some records may not include a definition.
essSubSurfaceType OBJECT-TYPE
SYNTAX INTEGER { other (1),
NTCIP 1204v03.08
unknown (2),
concrete (3),
asphalt (4),
openGradedAsphalt (5),
gravel (6),
clay (7),
loam (8),
sand (9),
permafrost (10),
variousAggregates (11),
air (12)}
ACCESS read-write
STATUS mandatory
DESCRIPTION "<Definition>Indicates the type of subsurface. A value of air
would indicate a bridge.
<SetConstraint>always
<DescriptiveName>SubSurfaceSensor.type:code
<Data Concept Type>Data Element"
::= { essSubSurfaceSensorEntry 3 }essSubSurfaceType OBJECT-TYPE
SYNTAX INTEGER {other (1),
unknown (2),
concrete (3),
asphalt (4),
openGradedAsphalt (5),
gravel (6),
clay (7),
loam (8),
sand (9),
permafrost (10),
variousAggregates (11),
air (12)}
ACCESS read-write
STATUS mandatory
DESCRIPTION “Indicates the type of sub-surface. A value of air would indicate a bridge.”
::= { essSubSurfaceSensorEntry 3}essSubSurfaceType OBJECT-TYPE
SYNTAX INTEGER { other (1),
unknown (2),
concrete (3),
asphalt (4),
openGradedAsphalt (5),
gravel (6),
clay (7),
loam (8),
sand (9),
permafrost (10),
variousAggregates (11),
air (12)}
ACCESS read-write
STATUS mandatory
DESCRIPTION "<Definition>Indicates the type of sub-surface. A value of air
would indicate a bridge.
<SetConstraint>always
<DescriptiveName>SubSurfaceSensor.type:code
<Data Concept Type>Data Element"
::= { essSubSurfaceSensorEntry 3 }essSubSurfaceType OBJECT-TYPE
SYNTAX INTEGER { other (1),
unknown (2),
concrete (3),
asphalt (4),
openGradedAsphalt (5),
gravel (6),
clay (7),
loam (8),
sand (9),
permafrost (10),
variousAggregates (11),
air (12)}
ACCESS read-write
STATUS mandatory
DESCRIPTION "<Definition>Indicates the type of subsurface. A value of air would indicate a bridge.
<DescriptiveName>SubSurfaceSensor.type:code
<Data Concept Type>Data Element
<Object Identifier> 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.3"
::= { essSubSurfaceSensorEntry 3 }essSubSurfaceType OBJECT-TYPE
SYNTAX INTEGER { other (1),
unknown (2),
concrete (3),
asphalt (4),
openGradedAsphalt (5),
gravel (6),
clay (7),
loam (8),
sand (9),
permafrost (10),
variousAggregates (11),
air (12)}
ACCESS read-write
STATUS mandatory
DESCRIPTION "<Definition>Indicates the type of subsurface. A value of air
would indicate a bridge.
<DescriptiveName>SubSurfaceSensor.type:code
<Data Concept Type>Data Element
<Object Identifier> 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.3"
::= { essSubSurfaceSensorEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
<Definition>Indicates the type of subsurface. A value of air would indicate a bridge. <SetConstraint>always <DescriptiveName>SubSurfaceSensor.type:code <Data Concept Type>Data Element
NTCIP published standard MIB annexes (reviewed modules)
Description 2
Indicates the type of sub-surface. A value of air would indicate a bridge.
NTCIP published standard MIB annexes (reviewed modules)
Description 3
<Definition>Indicates the type of sub-surface. A value of air would indicate a bridge. <SetConstraint>always <DescriptiveName>SubSurfaceSensor.type:code <Data Concept Type>Data Element
NTCIP published standard MIB annexes (reviewed modules)
Description 4
<Definition>Indicates the type of subsurface. A value of air would indicate a bridge. <DescriptiveName>SubSurfaceSensor.type:code <Data Concept Type>Data Element <Object Identifier> 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.3
ITE public NTCIP working repository MIBsNTCIP published standard MIB annexes (reviewed modules)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: essSubSurfaceType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"essSubSurfaceType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"NTCIP",
"1204",
"v03",
".",
"08",
"unknown",
"(",
"2",
")",
",",
"concrete",
"(",
"3",
")",
",",
"asphalt",
"(",
"4",
")",
",",
"openGradedAsphalt",
"(",
"5",
")",
",",
"gravel",
"(",
"6",
")",
",",
"clay",
"(",
"7",
")",
",",
"loam",
"(",
"8",
")",
",",
"sand",
"(",
"9",
")",
",",
"permafrost",
"(",
"10",
")",
",",
"variousAggregates",
"(",
"11",
")",
",",
"air",
"(",
"12",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition>Indicates the type of subsurface. A value of air would indicate a bridge. <SetConstraint>always <DescriptiveName>SubSurfaceSensor.type:code <Data Concept Type>Data Element\"",
"::=",
"{",
"essSubSurfaceSensorEntry",
"3",
"}"
]
}Module: NTCIP1204-v03
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004v02': ['ess', 'OerString']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations. The declaration also has invalid SMI syntax; its type constraints were not validated.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1204v0308r3withErrata.pdf — NTCIP1204-v03 (MIB transcription)Related source files and packages:
Status in source: mandatory.
Names: essSubSurfaceType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"essSubSurfaceType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"unknown",
"(",
"2",
")",
",",
"concrete",
"(",
"3",
")",
",",
"asphalt",
"(",
"4",
")",
",",
"openGradedAsphalt",
"(",
"5",
")",
",",
"gravel",
"(",
"6",
")",
",",
"clay",
"(",
"7",
")",
",",
"loam",
"(",
"8",
")",
",",
"sand",
"(",
"9",
")",
",",
"permafrost",
"(",
"10",
")",
",",
"variousAggregates",
"(",
"11",
")",
",",
"air",
"(",
"12",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"“",
"Indicates",
"the",
"type",
"of",
"sub-surface",
".",
"A",
"value",
"of",
"air",
"would",
"indicate",
"a",
"bridge",
".",
"”",
"::=",
"{",
"essSubSurfaceSensorEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"unknown",
2
],
[
"concrete",
3
],
[
"asphalt",
4
],
[
"openGradedAsphalt",
5
],
[
"gravel",
6
],
[
"clay",
7
],
[
"loam",
8
],
[
"sand",
9
],
[
"permafrost",
10
],
[
"variousAggregates",
11
],
[
"air",
12
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Indicates the type of sub-surface. A value of air would indicate a bridge."
],
null,
null,
null,
null
]
}Module: ESS-MIB
See published definition above
{'TMIB': ['devices'], 'NEMA_SMI': ['experimental'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter'], 'RFC1158-SMI': ['DisplayString']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: A typographic closing DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.
Source data warning: A typographic opening DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1204v0113c.pdf — ESS-MIB (MIB transcription)Status in source: mandatory.
Names: essSubSurfaceType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"essSubSurfaceType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"unknown",
"(",
"2",
")",
",",
"concrete",
"(",
"3",
")",
",",
"asphalt",
"(",
"4",
")",
",",
"openGradedAsphalt",
"(",
"5",
")",
",",
"gravel",
"(",
"6",
")",
",",
"clay",
"(",
"7",
")",
",",
"loam",
"(",
"8",
")",
",",
"sand",
"(",
"9",
")",
",",
"permafrost",
"(",
"10",
")",
",",
"variousAggregates",
"(",
"11",
")",
",",
"air",
"(",
"12",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition>Indicates the type of sub-surface. A value of air would indicate a bridge. <SetConstraint>always <DescriptiveName>SubSurfaceSensor.type:code <Data Concept Type>Data Element\"",
"::=",
"{",
"essSubSurfaceSensorEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"unknown",
2
],
[
"concrete",
3
],
[
"asphalt",
4
],
[
"openGradedAsphalt",
5
],
[
"gravel",
6
],
[
"clay",
7
],
[
"loam",
8
],
[
"sand",
9
],
[
"permafrost",
10
],
[
"variousAggregates",
11
],
[
"air",
12
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition>Indicates the type of sub-surface. A value of air would indicate a bridge. <SetConstraint>always <DescriptiveName>SubSurfaceSensor.type:code <Data Concept Type>Data Element"
],
null,
null,
null,
null
]
}Module: NTCIP1204-v02
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004-A-2004': ['ess', 'OerString']}Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004-A-2004. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1204v0224r.pdf — NTCIP1204-v02 (MIB transcription)Related source files and packages:
Status in source: mandatory.
Names: essSubSurfaceType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"essSubSurfaceType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"unknown",
"(",
"2",
")",
",",
"concrete",
"(",
"3",
")",
",",
"asphalt",
"(",
"4",
")",
",",
"openGradedAsphalt",
"(",
"5",
")",
",",
"gravel",
"(",
"6",
")",
",",
"clay",
"(",
"7",
")",
",",
"loam",
"(",
"8",
")",
",",
"sand",
"(",
"9",
")",
",",
"permafrost",
"(",
"10",
")",
",",
"variousAggregates",
"(",
"11",
")",
",",
"air",
"(",
"12",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition>Indicates the type of subsurface. A value of air would indicate a bridge. <DescriptiveName>SubSurfaceSensor.type:code <Data Concept Type>Data Element <Object Identifier> 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.3\"",
"::=",
"{",
"essSubSurfaceSensorEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"unknown",
2
],
[
"concrete",
3
],
[
"asphalt",
4
],
[
"openGradedAsphalt",
5
],
[
"gravel",
6
],
[
"clay",
7
],
[
"loam",
8
],
[
"sand",
9
],
[
"permafrost",
10
],
[
"variousAggregates",
11
],
[
"air",
12
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition>Indicates the type of subsurface. A value of air would indicate a bridge. <DescriptiveName>SubSurfaceSensor.type:code <Data Concept Type>Data Element <Object Identifier> 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.3"
],
null,
null,
null,
null
]
}Module: NTCIP1204-v04
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004v02': ['ess', 'OerString']}Source data warning: This original is published in an ITE NTCIP working repository. Repository publication does not establish that this particular revision is an adopted standard. Consult its native revision history and the NTCIP published standards catalog before implementation. Copyright and distribution notices are retained in the downloadable original.
Source data warning: Potentially inaccurate interpretation of historical NTCIP imports: the original references NTCIP8004v02, which is absent from the public repository snapshot. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1204 — NTCIP1204-Ess.mibModule: NTCIP1204-v04
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004v02': ['ess', 'OerString']}Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: The published normative SMI section omits its module END. The derived parser boundary is placed immediately before section 5.17, whose text explicitly says its items are not SNMP Objects. No declaration or numeric arc is added; the complete PDF is authoritative.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1204v0426b-2021_AsPublished.pdf — NTCIP1204-v04 (MIB transcription)Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.1 | essSubSurfaceSensorIndex | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.2 | essSubSurfaceSensorLocation | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.4 | essSubSurfaceSensorDepth | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.5 | essSubSurfaceTemperature | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.7 | essSubSurfaceMoisture | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.8 | essSubSurfaceSensorError | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.9 | essSubSurfaceSensorLatitude | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.10 | essSubSurfaceSensorLongitude | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.5.2.9.4.1.11 | essSubSurfaceSensorModelInformation | 0 | 0 |