eqlMemberHealthFanSpeedHighthreshold NOTIFICATION-TYPE
OBJECTS{
eqlMemberHealthDetailsFanName,
eqlMemberHealthDetailsFanValue,
eqlMemberHealthDetailsFanCurrentState,
eqlMemberHealthDetailsFanHighCriticalThreshold,
eqlMemberHealthDetailsFanHighWarningThreshold,
eqlMemberHealthDetailsFanNameID
}
STATUS current
DESCRIPTION
"Sent when a high threshold has been exceeded for any of the
enclosure fan speed sensors. The implementation of this trap should
not send more than one notification of this type for a sensor
in any 10 minute time span"
View at oid-info.com
Sent when a high threshold has been exceeded for any of the
enclosure fan speed sensors. The implementation of this trap should
not send more than one notification of this type for a sensor
in any 10 minute time span
Parsed from file eqlmember.mib.txt
Company: equallogic
Module: EQLMEMBER-MIB
eqlMemberHealthFanSpeedHighThreshold NOTIFICATION-TYPE OBJECTS{ eqlMemberHealthDetailsFanName, eqlMemberHealthDetailsFanValue, eqlMemberHealthDetailsFanCurrentState, eqlMemberHealthDetailsFanHighCriticalThreshold, eqlMemberHealthDetailsFanHighWarningThreshold } STATUS current DESCRIPTION "Sent when a high threshold has been exceeded for any of the enclosure fan speed sensors. The implementation of this trap should not send more than one notification of this type for a sensor in any 10 minute time span" ::= { eqlMemberEnclosureMgmtNotifications 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.12740.2.2.1.1 | eqlMemberHealthTempSensorHighThreshold | 0 | 0 | Sent when a high threshold has been exceeded for any of the enclosure temp sensors. The implementation of this trap should not se… |
| 1.3.6.1.4.1.12740.2.2.1.2 | eqlMemberHealthTempSensorLowThreshold | 0 | 0 | Sent when a low threshold has been exceeded for any of the enclosure temp sensors. The implementation of this trap should not sen… |
| 1.3.6.1.4.1.12740.2.2.1.4 | eqlMemberHealthFanSpeedLowThreshold | 0 | 0 | Sent when a low threshold has been exceeded for any of the enclosure fan speed sensors. The implementation of this trap should no… |
| 1.3.6.1.4.1.12740.2.2.1.5 | eqlMemberHealthPowerSupplyFanFailure | 0 | 0 | Sent when a failure has been detected on any of the power supply fan speed sensors. The implementation of this trap should not se… |
| 1.3.6.1.4.1.12740.2.2.1.6 | eqlMemberHealthPowerSupplyFailure | 0 | 0 | Sent when a failure has been detected on any of the power supplys in the PSA. The implementation of this trap should not send mor… |
| 1.3.6.1.4.1.12740.2.2.1.7 | eqlMemberHealthRAIDSetDoubleFaulted | 0 | 0 | Sent when the raid set has been detected to have double faulted. When this occurs, the array will not come up. User intervention … |
| 1.3.6.1.4.1.12740.2.2.1.8 | eqlMemberHealthBothFanTraysRemoved | 0 | 0 | Sent when both of the fan trays have been removed from the chassis. This results in overheating |
| 1.3.6.1.4.1.12740.2.2.1.9 | eqlMemberHealthRAIDlostCache | 0 | 0 | Sent because the RAID driver is unable to recover the battery-backed cache. The disk array will not initialize without user inte… |
| 1.3.6.1.4.1.12740.2.2.1.10 | eqlMemberHealthFanTrayRemoved | 0 | 0 | Sent when one of the fan trays have been removed from the chassis. This results in overheating |
| 1.3.6.1.4.1.12740.2.2.1.11 | eqlMemberHealthRAIDSetLostBlkTableFull | 0 | 0 | Sent when the RAID lost block table is full. This usually is an indication of lost data. |
| 1.3.6.1.4.1.12740.2.2.1.12 | eqlMemberHealthBatteryLessThan72Hours | 0 | 0 | Sent when the battery has insufficient charge to survive a 72 hour power outage. |
| 1.3.6.1.4.1.12740.2.2.1.13 | eqlMemberHealthRaidOrphanCache | 0 | 0 | Sent when the RAID driver finds data in the battery-backed cache with no matching disk array. Initialization will not proceed … |
| 1.3.6.1.4.1.12740.2.2.1.14 | eqlMemberHealthRaidMultipleRaidSets | 0 | 0 | Sent when multiple valid RAIDsets were found. The array cannot choose which one to initialize. Remove all but one valid RAIDs… |
| 1.3.6.1.4.1.12740.2.2.1.15 | eqlMemberHealthNVRAMBatteryFailed | 0 | 0 | Sent when the NVRAM battery fails . The NVRAM can no longer be used. |
| 1.3.6.1.4.1.12740.2.2.1.16 | eqlMemberHealthhwComponentFailedCrit | 0 | 0 | Sent when a critical hardware component has failed. |
| 1.3.6.1.4.1.12740.2.2.1.17 | eqlMemberHealthincompatControlModule | 0 | 0 | Sent when An incorrect control module has been inserted into the chassis. |
| 1.3.6.1.4.1.12740.2.2.1.18 | eqlMemberHealthlowAmbientTemp | 0 | 0 | Sent when one or more sensors is below its critical temperature range. |
| 1.3.6.1.4.1.12740.2.2.1.19 | eqlMemberHealthopsPanelFailure | 0 | 0 | Sent when Ops Panel is missing or broken. |
| 1.3.6.1.4.1.12740.2.2.1.20 | eqlMemberHealthemmLinkFailure | 0 | 0 | Sent when enclosure management services are unavailable. |
| 1.3.6.1.4.1.12740.2.2.1.21 | eqlMemberHealthhighBatteryTemperature | 0 | 0 | Sent when the cache battery temperature exceeds upper limit; battery charger is disabled. |
| 1.3.6.1.4.1.12740.2.2.1.22 | eqlMemberHealthenclosureOpenPerm | 0 | 0 | eqlMemberHealthenclosureOpenPerm NOTIFICATION-TYPE OBJECTS{ eqlMemberHealthStatus } STATUS current DESCRIPTION "Sent when the e… |
| 1.3.6.1.4.1.12740.2.2.1.23 | eqlMemberHealthsumoChannelBothMissing | 0 | 0 | eqlMemberHealthsumoChannelBothMissing NOTIFICATION-TYPE OBJECTS{ eqlMemberHealthStatus } STATUS current DESCRIPTION "Sent when … |
| 1.3.6.1.4.1.12740.2.2.1.24 | eqlMemberHealthsumoEIPFailureCOndition | 0 | 0 | eqlMemberHealthsumoEIPFailureCOndition NOTIFICATION-TYPE OBJECTS{ eqlMemberHealthStatus } STATUS current DESCRIPTION "Sent when… |
| 1.3.6.1.4.1.12740.2.2.1.25 | eqlMemberHealthsumoChannelBothFailed | 0 | 0 | eqlMemberHealthsumoChannelBothFailed NOTIFICATION-TYPE OBJECTS{ eqlMemberHealthStatus } STATUS current DESCRIPTION "Sent when b… |