eqlMemberHealthRAIDSetDoubleFaulted NOTIFICATION-TYPE
OBJECTS{
eqlMemberHealthStatus
}
STATUS current
DESCRIPTION
"Sent when the raid set has been detected to have double faulted. When
this occurs, the array will not come up.
User intervention is required to correct the issue"
View at oid-info.com
Sent when the raid set has been detected to have double faulted. When
this occurs, the array will not come up.
User intervention is required to correct the issue
Parsed from file eqlmember.mib.txt
Company: equallogic
Module: EQLMEMBER-MIB
eqlMemberHealthRAIDSetDoubleFaulted NOTIFICATION-TYPE OBJECTS{ eqlMemberHealthStatus } STATUS current DESCRIPTION "Sent when the raid set has been detected to have double faulted. When this occurs, the array will not come up. User intervention is required to correct the issue" ::= { eqlMemberEnclosureMgmtNotifications 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.12740.2.2.1.1 | eqlMemberHealthTempSensorHighThreshold | 0 | 0 | Sent when a high threshold has been exceeded for any of the enclosure temp sensors. The implementation of this trap should not se… |
| 1.3.6.1.4.1.12740.2.2.1.2 | eqlMemberHealthTempSensorLowThreshold | 0 | 0 | Sent when a low threshold has been exceeded for any of the enclosure temp sensors. The implementation of this trap should not sen… |
| 1.3.6.1.4.1.12740.2.2.1.3 | eqlMemberHealthFanSpeedHighThreshold | 0 | 0 | Sent when a high threshold has been exceeded for any of the enclosure fan speed sensors. The implementation of this trap should n… |
| 1.3.6.1.4.1.12740.2.2.1.4 | eqlMemberHealthFanSpeedLowThreshold | 0 | 0 | Sent when a low threshold has been exceeded for any of the enclosure fan speed sensors. The implementation of this trap should no… |
| 1.3.6.1.4.1.12740.2.2.1.5 | eqlMemberHealthPowerSupplyFanFailure | 0 | 0 | Sent when a failure has been detected on any of the power supply fan speed sensors. The implementation of this trap should not se… |
| 1.3.6.1.4.1.12740.2.2.1.6 | eqlMemberHealthPowerSupplyFailure | 0 | 0 | Sent when a failure has been detected on any of the power supplys in the PSA. The implementation of this trap should not send mor… |
| 1.3.6.1.4.1.12740.2.2.1.8 | eqlMemberHealthBothFanTraysRemoved | 0 | 0 | Sent when both of the fan trays have been removed from the chassis. This results in overheating |
| 1.3.6.1.4.1.12740.2.2.1.9 | eqlMemberHealthRAIDlostCache | 0 | 0 | Sent because the RAID driver is unable to recover the battery-backed cache. The disk array will not initialize without user inte… |
| 1.3.6.1.4.1.12740.2.2.1.10 | eqlMemberHealthFanTrayRemoved | 0 | 0 | Sent when one of the fan trays have been removed from the chassis. This results in overheating |
| 1.3.6.1.4.1.12740.2.2.1.11 | eqlMemberHealthRAIDSetLostBlkTableFull | 0 | 0 | Sent when the RAID lost block table is full. This usually is an indication of lost data. |
| 1.3.6.1.4.1.12740.2.2.1.12 | eqlMemberHealthBatteryLessThan72Hours | 0 | 0 | Sent when the battery has insufficient charge to survive a 72 hour power outage. |
| 1.3.6.1.4.1.12740.2.2.1.13 | eqlMemberHealthRaidOrphanCache | 0 | 0 | Sent when the RAID driver finds data in the battery-backed cache with no matching disk array. Initialization will not proceed … |
| 1.3.6.1.4.1.12740.2.2.1.14 | eqlMemberHealthRaidMultipleRaidSets | 0 | 0 | Sent when multiple valid RAIDsets were found. The array cannot choose which one to initialize. Remove all but one valid RAIDs… |
| 1.3.6.1.4.1.12740.2.2.1.15 | eqlMemberHealthNVRAMBatteryFailed | 0 | 0 | Sent when the NVRAM battery fails . The NVRAM can no longer be used. |
| 1.3.6.1.4.1.12740.2.2.1.16 | eqlMemberHealthhwComponentFailedCrit | 0 | 0 | Sent when a critical hardware component has failed. |
| 1.3.6.1.4.1.12740.2.2.1.17 | eqlMemberHealthincompatControlModule | 0 | 0 | Sent when An incorrect control module has been inserted into the chassis. |
| 1.3.6.1.4.1.12740.2.2.1.18 | eqlMemberHealthlowAmbientTemp | 0 | 0 | Sent when one or more sensors is below its critical temperature range. |
| 1.3.6.1.4.1.12740.2.2.1.19 | eqlMemberHealthopsPanelFailure | 0 | 0 | Sent when Ops Panel is missing or broken. |
| 1.3.6.1.4.1.12740.2.2.1.20 | eqlMemberHealthemmLinkFailure | 0 | 0 | Sent when enclosure management services are unavailable. |
| 1.3.6.1.4.1.12740.2.2.1.21 | eqlMemberHealthhighBatteryTemperature | 0 | 0 | Sent when the cache battery temperature exceeds upper limit; battery charger is disabled. |
| 1.3.6.1.4.1.12740.2.2.1.22 | eqlMemberHealthenclosureOpenPerm | 0 | 0 | eqlMemberHealthenclosureOpenPerm NOTIFICATION-TYPE OBJECTS{ eqlMemberHealthStatus } STATUS current DESCRIPTION "Sent when the e… |
| 1.3.6.1.4.1.12740.2.2.1.23 | eqlMemberHealthsumoChannelBothMissing | 0 | 0 | eqlMemberHealthsumoChannelBothMissing NOTIFICATION-TYPE OBJECTS{ eqlMemberHealthStatus } STATUS current DESCRIPTION "Sent when … |
| 1.3.6.1.4.1.12740.2.2.1.24 | eqlMemberHealthsumoEIPFailureCOndition | 0 | 0 | eqlMemberHealthsumoEIPFailureCOndition NOTIFICATION-TYPE OBJECTS{ eqlMemberHealthStatus } STATUS current DESCRIPTION "Sent when… |
| 1.3.6.1.4.1.12740.2.2.1.25 | eqlMemberHealthsumoChannelBothFailed | 0 | 0 | eqlMemberHealthsumoChannelBothFailed NOTIFICATION-TYPE OBJECTS{ eqlMemberHealthStatus } STATUS current DESCRIPTION "Sent when b… |