The power supply is notifying the main digital board that its main image
crc is incorrect. The main digital board needs to reprogram the new
power supply image again, or revert back to an older good image
Parsed from file amperion.mib.txt
Company: None
Module: Amperion-MIB
The power supply is notifying the main digital board that its main image
crc is incorrect. The main digital board needs to reprogram the new
power supply image again, or revert back to an older good image
Parsed from file Amperion-MIB.mib
Module: Amperion-MIB
psImageChecksumError NOTIFICATION-TYPE OBJECTS { eventDescription } STATUS current DESCRIPTION "The power supply is notifying the main digital board that its main image crc is incorrect. The main digital board needs to reprogram the new power supply image again, or revert back to an older good image" ::= { psGroup 14 }
psImageChecksumError NOTIFICATION-TYPE OBJECTS { eventDescription } STATUS current DESCRIPTION "The power supply is notifying the main digital board that its main image crc is incorrect. The main digital board needs to reprogram the new power supply image again, or revert back to an older good image" ::= { psGroup 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13995.4.1 | acLineVoltage | 1 | 1 | State of AC Line voltage (on/off) |
| 1.3.6.1.4.1.13995.4.2 | plus12v | 1 | 1 | Regulated 12 volt supply |
| 1.3.6.1.4.1.13995.4.3 | minus8point5v | 1 | 1 | Regulated -8.5 volt supply |
| 1.3.6.1.4.1.13995.4.4 | plus5v | 1 | 1 | Regulated +5 volt supply |
| 1.3.6.1.4.1.13995.4.5 | plus3point3v | 1 | 1 | Regulated +3.3 volt supply |
| 1.3.6.1.4.1.13995.4.6 | batteryCaseTemp | 1 | 1 | Battery Case Temperature |
| 1.3.6.1.4.1.13995.4.7 | internalMcuTemp | 1 | 1 | Internal Micro Controller Unit Temperature |
| 1.3.6.1.4.1.13995.4.8 | batteryCurrent | 1 | 1 | Battery Current |
| 1.3.6.1.4.1.13995.4.9 | batteryVoltage | 1 | 1 | Battery Voltage |
| 1.3.6.1.4.1.13995.4.10 | mcuSoftwareVersion | 1 | 1 | Micro Controller Unit Software Version |
| 1.3.6.1.4.1.13995.4.11 | powerCycleNpu | 1 | 1 | Power Cycle the Network Processor Unit |
| 1.3.6.1.4.1.13995.4.12 | psMode | 1 | 1 | Power Supply mode, normal mode is protocol; dump mode is a debug mode which displays debug prints from the MCU |
| 1.3.6.1.4.1.13995.4.13 | shutdownNpu | 1 | 1 | Shut down 12v, -8.5v, 3.3v and 5v regulators driving the Network Processor Unit. This should only be used if one of the voltages… |
| 1.3.6.1.4.1.13995.4.15 | criticalBatteryShutdownWarning | 0 | 0 | The power supply is warning the main digital board that we have lost AC Line voltage and the battery is running low. The system … |
| 1.3.6.1.4.1.13995.4.16 | p12vOutOfRange | 0 | 0 | The power supply is warning the main digital board that the +12v regulator is out of range. If the condition is such that it is … |
| 1.3.6.1.4.1.13995.4.17 | m8point5vOutOfRange | 0 | 0 | The power supply is warning the main digital board that the -8.5v regulator is out of range. Note that the -8.5v regulator is th… |
| 1.3.6.1.4.1.13995.4.18 | p5vOutOfRange | 0 | 0 | The power supply is warning the main digital board that the +5v regulator is out of range. If the condition is such that it is t… |
| 1.3.6.1.4.1.13995.4.19 | p3point3vOutOfRange | 0 | 0 | The power supply is warning the main digital board that the +3.3v regulator is out of range. If the condition is such that it is… |
| 1.3.6.1.4.1.13995.4.20 | batteryVoltsOutOfRange | 0 | 0 | The power supply is warning the main digital board that the battery voltage is out of range. |
| 1.3.6.1.4.1.13995.4.21 | mcuTempOutOfRange | 0 | 0 | The power supply is warning the main digital board that the microcontroller unit core temperature is out of range. |
| 1.3.6.1.4.1.13995.4.22 | batteryTempOutOfRange | 0 | 0 | The power supply is warning the main digital board that the battery temperature is out of range |
| 1.3.6.1.4.1.13995.4.23 | psDetectedCommLapse | 0 | 0 | Power Supply notifies main digital board that it did not communnicate to the power supply within the agreed upon periodic inter… |
| 1.3.6.1.4.1.13995.4.24 | criticalRequestAborted | 0 | 0 | The power supply is notifying the main digital board that one of the critical requests was aborted due to not receiving it twice… |
| 1.3.6.1.4.1.13995.4.25 | powerSupplyInternalError | 0 | 0 | Power Supply / netmgt (PS thread) detected an internal error condition |
| 1.3.6.1.4.1.13995.4.26 | psBatteryNotConnected | 0 | 0 | Power Supply Battery Not Connected. There is no battery backup for the system. |
| 1.3.6.1.4.1.13995.4.27 | psAcOnOff | 0 | 0 | Power Supply detected AC going ON / OFF |
| 1.3.6.1.4.1.13995.4.28 | psHardwareVersion | 1 | 1 | Hardware Version of the Power SUpply |
| 1.3.6.1.4.1.13995.4.29 | psHardwareError | 0 | 0 | The power supply is notifying the main digital board that it incurred a hardware error |
| 1.3.6.1.4.1.13995.4.30 | psEt | 1 | 1 | Power Supply elapsed time since powerup |
| 1.3.6.1.4.1.13995.4.31 | npuEt | 1 | 1 | Power Supply elapsed time since powerup |
| 1.3.6.1.4.1.13995.4.32 | npuPuTimes | 1 | 1 | Number of times the Network Processing Unit has been powered up. |
| 1.3.6.1.4.1.13995.4.33 | eventDescription | 1 | 1 | Description of the Last Event - Used in sending traps |
| 1.3.6.1.4.1.13995.4.34 | npuDetectedCommLapse | 0 | 0 | Network processing unit could not communnicate to the power supply |