Power Supply elapsed time since powerup
Parsed from file amperion.mib.txt
Company: None
Module: Amperion-MIB
Power Supply elapsed time since powerup
Parsed from file Amperion-MIB.mib
Module: Amperion-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
psEt OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Power Supply elapsed time since powerup" ::= { psGroup 30 }
psEt OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Power Supply elapsed time since powerup" ::= { psGroup 30 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13995.4.30.0 | psEt | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13995.4.1 | acLineVoltage | 1 | 1 | State of AC Line voltage (on/off) |
| 1.3.6.1.4.1.13995.4.2 | plus12v | 1 | 1 | Regulated 12 volt supply |
| 1.3.6.1.4.1.13995.4.3 | minus8point5v | 1 | 1 | Regulated -8.5 volt supply |
| 1.3.6.1.4.1.13995.4.4 | plus5v | 1 | 1 | Regulated +5 volt supply |
| 1.3.6.1.4.1.13995.4.5 | plus3point3v | 1 | 1 | Regulated +3.3 volt supply |
| 1.3.6.1.4.1.13995.4.6 | batteryCaseTemp | 1 | 1 | Battery Case Temperature |
| 1.3.6.1.4.1.13995.4.7 | internalMcuTemp | 1 | 1 | Internal Micro Controller Unit Temperature |
| 1.3.6.1.4.1.13995.4.8 | batteryCurrent | 1 | 1 | Battery Current |
| 1.3.6.1.4.1.13995.4.9 | batteryVoltage | 1 | 1 | Battery Voltage |
| 1.3.6.1.4.1.13995.4.10 | mcuSoftwareVersion | 1 | 1 | Micro Controller Unit Software Version |
| 1.3.6.1.4.1.13995.4.11 | powerCycleNpu | 1 | 1 | Power Cycle the Network Processor Unit |
| 1.3.6.1.4.1.13995.4.12 | psMode | 1 | 1 | Power Supply mode, normal mode is protocol; dump mode is a debug mode which displays debug prints from the MCU |
| 1.3.6.1.4.1.13995.4.13 | shutdownNpu | 1 | 1 | Shut down 12v, -8.5v, 3.3v and 5v regulators driving the Network Processor Unit. This should only be used if one of the voltages… |
| 1.3.6.1.4.1.13995.4.14 | psImageChecksumError | 0 | 0 | The power supply is notifying the main digital board that its main image crc is incorrect. The main digital board needs to repr… |
| 1.3.6.1.4.1.13995.4.15 | criticalBatteryShutdownWarning | 0 | 0 | The power supply is warning the main digital board that we have lost AC Line voltage and the battery is running low. The system … |
| 1.3.6.1.4.1.13995.4.16 | p12vOutOfRange | 0 | 0 | The power supply is warning the main digital board that the +12v regulator is out of range. If the condition is such that it is … |
| 1.3.6.1.4.1.13995.4.17 | m8point5vOutOfRange | 0 | 0 | The power supply is warning the main digital board that the -8.5v regulator is out of range. Note that the -8.5v regulator is th… |
| 1.3.6.1.4.1.13995.4.18 | p5vOutOfRange | 0 | 0 | The power supply is warning the main digital board that the +5v regulator is out of range. If the condition is such that it is t… |
| 1.3.6.1.4.1.13995.4.19 | p3point3vOutOfRange | 0 | 0 | The power supply is warning the main digital board that the +3.3v regulator is out of range. If the condition is such that it is… |
| 1.3.6.1.4.1.13995.4.20 | batteryVoltsOutOfRange | 0 | 0 | The power supply is warning the main digital board that the battery voltage is out of range. |
| 1.3.6.1.4.1.13995.4.21 | mcuTempOutOfRange | 0 | 0 | The power supply is warning the main digital board that the microcontroller unit core temperature is out of range. |
| 1.3.6.1.4.1.13995.4.22 | batteryTempOutOfRange | 0 | 0 | The power supply is warning the main digital board that the battery temperature is out of range |
| 1.3.6.1.4.1.13995.4.23 | psDetectedCommLapse | 0 | 0 | Power Supply notifies main digital board that it did not communnicate to the power supply within the agreed upon periodic inter… |
| 1.3.6.1.4.1.13995.4.24 | criticalRequestAborted | 0 | 0 | The power supply is notifying the main digital board that one of the critical requests was aborted due to not receiving it twice… |
| 1.3.6.1.4.1.13995.4.25 | powerSupplyInternalError | 0 | 0 | Power Supply / netmgt (PS thread) detected an internal error condition |
| 1.3.6.1.4.1.13995.4.26 | psBatteryNotConnected | 0 | 0 | Power Supply Battery Not Connected. There is no battery backup for the system. |
| 1.3.6.1.4.1.13995.4.27 | psAcOnOff | 0 | 0 | Power Supply detected AC going ON / OFF |
| 1.3.6.1.4.1.13995.4.28 | psHardwareVersion | 1 | 1 | Hardware Version of the Power SUpply |
| 1.3.6.1.4.1.13995.4.29 | psHardwareError | 0 | 0 | The power supply is notifying the main digital board that it incurred a hardware error |
| 1.3.6.1.4.1.13995.4.31 | npuEt | 1 | 1 | Power Supply elapsed time since powerup |
| 1.3.6.1.4.1.13995.4.32 | npuPuTimes | 1 | 1 | Number of times the Network Processing Unit has been powered up. |
| 1.3.6.1.4.1.13995.4.33 | eventDescription | 1 | 1 | Description of the Last Event - Used in sending traps |
| 1.3.6.1.4.1.13995.4.34 | npuDetectedCommLapse | 0 | 0 | Network processing unit could not communnicate to the power supply |