The HBA caching module. 'Embedded' means
that the disk array function is built inside the HBA
(SmartRAID products.)
Parsed from file Dpt.mib.txt
Company: None
Module: DPT-SCSI-MIB
The controller caching module. 'Embedded' means
that the disk array function is built inside the controller
(SmartRAID products.)
Parsed from file DPT-SCSI-MIB.mib
Module: DPT-SCSI-MIB
Vendor: Distributed Processing Technology
Module: DPT-SCSI-MIB
[Automatically extracted from oidview.com]
dptScsiHbaCachingModule OBJECT-TYPE SYNTAX CachingModule ACCESS read-only STATUS mandatory DESCRIPTION "The HBA caching module. 'Embedded' means that the disk array function is built inside the HBA (SmartRAID products.)" ::= { dptScsiHbaEntry 13 }
dptScsiHbaCachingModule OBJECT-TYPE SYNTAX CachingModule ACCESS read-only STATUS deprecated DESCRIPTION "The controller caching module. 'Embedded' means that the disk array function is built inside the controller (SmartRAID products.)" ::= { dptScsiHbaEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1597.1.2.1.1.1 | dptScsiHbaNumber | 0 | 0 | An index that uniquely identifies a row in dptHbaTable that pertains to a particular controller. The value of this object is the … |
| 1.3.6.1.4.1.1597.1.2.1.1.2 | dptScsiHbaVendor | 0 | 0 | The name of the vendor of the HBA. |
| 1.3.6.1.4.1.1597.1.2.1.1.3 | dptScsiHbaModel | 0 | 0 | The controller model identifier. |
| 1.3.6.1.4.1.1597.1.2.1.1.4 | dptScsiHbaFirmware | 0 | 0 | The controller firmware version. |
| 1.3.6.1.4.1.1597.1.2.1.1.5 | dptScsiHbaSerialNumber | 0 | 0 | The controller serial number. |
| 1.3.6.1.4.1.1597.1.2.1.1.6 | dptScsiHbaAddress, dptScsiHbaIOAddress | 0 | 0 | The controller Address (normally displayed in hex.) It is a 32-bit value representing the memory address used by the controller |
| 1.3.6.1.4.1.1597.1.2.1.1.7 | dptScsiHbaHostBusType | 0 | 0 | The type of the host computer's system bus this HBA is attached to. |
| 1.3.6.1.4.1.1597.1.2.1.1.8 | dptScsiHbaHostBusMaxTransferRate | 0 | 0 | The host bus maximum possible transfer rate in MB/s. |
| 1.3.6.1.4.1.1597.1.2.1.1.9 | dptScsiHbaIrq | 0 | 0 | The controller interrupt level. |
| 1.3.6.1.4.1.1597.1.2.1.1.10 | dptScsiHbaIrqType | 0 | 0 | The Host Bus Adapter(HBA) interrupt type. |
| 1.3.6.1.4.1.1597.1.2.1.1.11 | dptScsiHbaDrq | 0 | 0 | The Host Bus Adapter(HBA) DMA channel. This object is only applicable for ISA HBAs. Its value is 'notApplicable' for the other ty… |
| 1.3.6.1.4.1.1597.1.2.1.1.12 | dptScsiHbaRaidModule | 0 | 0 | The HBA RAID module type. The addition of a DM4000 RAID module and caching module (SmarCache III products) or an RC4040 or RC4041… |
| 1.3.6.1.4.1.1597.1.2.1.1.14 | dptScsiHbaAudibleAlarmOn | 0 | 0 | This returns the current status of the controller alarm. |
| 1.3.6.1.4.1.1597.1.2.1.1.15 | dptScsiHbaUpTime | 0 | 0 | Time elapsed (in hundredths of a second) since the controller was last booted. |
| 1.3.6.1.4.1.1597.1.2.1.1.16 | dptScsiHbaEccEnabled | 0 | 0 | Shows if ECC is enabled on the HBA. Setting this allows the enabling and disabling of ECC. |
| 1.3.6.1.4.1.1597.1.2.1.1.17 | dptScsiHbaBackgroundTaskPriority | 0 | 0 | This object controls the priority of background tasks such as diagnostics, array verification and array rebuilds for this HBA. Se… |
| 1.3.6.1.4.1.1597.1.2.1.1.18 | dptScsiHbaExclusionPeriodEnabled | 0 | 0 | HBA exclution period is the time span during which it devotes 100% of its time fulfilling requests for data reads/writes and zero… |
| 1.3.6.1.4.1.1597.1.2.1.1.19 | dptScsiHbaExclusionPeriodStart | 0 | 0 | Hour of beginning of the exclusion period. For example, a value of 0 means that the exclusion starts at 12 a.m. The maximum durat… |
| 1.3.6.1.4.1.1597.1.2.1.1.20 | dptScsiHbaExclusionPeriodEnd | 0 | 0 | Hour when exclusion period ends. For example, a value of 23 means that the exclusion ends at 11 p.m. The maximum duration of an e… |
| 1.3.6.1.4.1.1597.1.2.1.1.21 | dptScsiHbaMaxReadAheadPercentage | 0 | 0 | Max percentage of HBA cache RAM devoted to read-ahead pages. |
| 1.3.6.1.4.1.1597.1.2.1.1.22 | dptScsiHbaMaxDirtyPagesPercentage | 0 | 0 | Max percentage of HBA cache RAM that may contain dirty pages. |
| 1.3.6.1.4.1.1597.1.2.1.1.23 | dptScsiHbaWriteBackDelay | 0 | 0 | Write-back delay in milliseconds. |
| 1.3.6.1.4.1.1597.1.2.1.1.24 | dptScsiHbaTemperature | 0 | 0 | Temperature as measured by the HBA. |
| 1.3.6.1.4.1.1597.1.2.1.1.25 | dptScsiHbaVoltage | 0 | 0 | Voltage as measured by the HBA. |
| 1.3.6.1.4.1.1597.1.2.1.1.26 | dptScsiHbaBadMemoryAddress | 0 | 0 | If the controller detects a cache RAM error, the address of the most recent error is stored here. Otherwise it indicates that no … |
| 1.3.6.1.4.1.1597.1.2.1.1.27 | dptScsiHbaBatteryModule | 0 | 0 | The Battery Backup Module preserves all controller cache and local memory contents in the event of power loss to the system |
| 1.3.6.1.4.1.1597.1.2.1.1.28 | dptScsiHbaBatteryStatus | 0 | 0 | Battery status reported by the controller. |
| 1.3.6.1.4.1.1597.1.2.1.1.29 | dptScsiHbaHighestBusWithDevices | 0 | 0 | The bus number of the highest numbered bus on this controller which has devices currently attached to it. |
| 1.3.6.1.4.1.1597.1.2.1.1.30 | dptScsiHbaGeneralStatus | 0 | 0 | General controller status. The following are the possible values: ok - the controller and all components attached to… |
| 1.3.6.1.4.1.1597.1.2.1.1.31 | dptScsiHbaSmorSignature | 0 | 0 | The controller S.M.O.R. revision information. Not available for SmartRAID IV and earlier controllers. |
| 1.3.6.1.4.1.1597.1.2.1.1.32 | dptScsiHbaBiosSignature | 0 | 0 | The controller B.I.O.S. revision information. Not available for SmartRAID IV and earlier controllers. |
| 1.3.6.1.4.1.1597.1.2.1.1.33 | dptScsiHbaNvramLayout | 0 | 0 | The controller NVRAM layout revision. |