System Bus Number, for the bus the controller is
interfacing
with. This value is supplied by the Operating system and may not be defined
for all operating systems.
Parsed from file mylexraid.mib.txt
Company: None
Module: MYLEXRAID-MIB
System Bus Number, for the bus the controller is interfacing
with. This value is supplied by the Operating system and may not be defined
for all operating systems.
Parsed from file MYLEXRAID-MIB.mib
Module: MYLEXRAID-MIB
Vendor: Mylex Corporation
Module: MYLEXRAID-MIB
[Automatically extracted from oidview.com]
a2SystemBusNumber OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "System Bus Number, for the bus the controller is interfacing with. This value is supplied by the Operating system and may not be defined for all operating systems." ::= {eControllerInformation 21}
a2SystemBusNumber OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "System Bus Number, for the bus the controller is interfacing with. This value is supplied by the Operating system and may not be defined for all operating systems." ::= {eControllerInformation 21}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1608.1.1.1.2.1.1 | a2ControllerNumber | 0 | 0 | Controller Number assigned to this controller by the device driver. |
1.3.6.1.4.1.1608.1.1.1.2.1.2 | a2OperationalState | 0 | 0 | Operational state of this controller as seen by the device driver. |
1.3.6.1.4.1.1608.1.1.1.2.1.3 | a2FirmwareRevision | 0 | 0 | Controller Firmware Revision. |
1.3.6.1.4.1.1608.1.1.1.2.1.4 | a2ConfiguredChannels | 0 | 0 | Number of Channels that are part of controller configuration. |
1.3.6.1.4.1.1608.1.1.1.2.1.5 | a2ActualChannels | 0 | 0 | Number of Channels that are physically present on-board the controller. |
1.3.6.1.4.1.1608.1.1.1.2.1.6 | a2MaximumLogicalDrives | 0 | 0 | Maximum number of logical drives that can be configured on this controller. |
1.3.6.1.4.1.1608.1.1.1.2.1.7 | a2MaximumTargetsPerChannel | 0 | 0 | Maximum Number of Physical Target IDs supported per Channel |
1.3.6.1.4.1.1608.1.1.1.2.1.8 | a2MaximumTaggedRequests | 0 | 0 | Maximum Number of Tagged requests that may be sent to a Hard disk device by Controller Firmware. |
1.3.6.1.4.1.1608.1.1.1.2.1.9 | a2MaximumDataTransferSizePerIoRequestInK | 0 | 0 | Maximum amount of data that can be transferred per a single IO request - in KB. |
1.3.6.1.4.1.1608.1.1.1.2.1.10 | a2MaximumConcurrentCommands | 0 | 0 | Maximum number of requests that can be sent to the controller simultaneouly. |
1.3.6.1.4.1.1608.1.1.1.2.1.11 | a2RebuildRate | 0 | 0 | Value of Rebuild Rate. |
1.3.6.1.4.1.1608.1.1.1.2.1.12 | a2LogicalSectorSizeInBytes | 0 | 0 | Logical Sector Size in Bytes (Default: 512 bytes). |
1.3.6.1.4.1.1608.1.1.1.2.1.13 | a2PhysicalSectorSizeInBytes | 0 | 0 | Physical Sector Size in Bytes (Default: 512 bytes). |
1.3.6.1.4.1.1608.1.1.1.2.1.14 | a2CacheLineSizeInBytes | 0 | 0 | Cache Line Size in Bytes. |
1.3.6.1.4.1.1608.1.1.1.2.1.15 | a2CacheSizeInMb | 0 | 0 | Size of Controller Cache Module - in MB. |
1.3.6.1.4.1.1608.1.1.1.2.1.16 | a2CacheMemoryType | 0 | 0 | Controller Cache Memory Type. |
1.3.6.1.4.1.1608.1.1.1.2.1.17 | a2EpromSizeInKb | 0 | 0 | Size of Controller EPROM Module - in KB. |
1.3.6.1.4.1.1608.1.1.1.2.1.18 | a2BusType | 0 | 0 | Controller - System Bus Interface Type. |
1.3.6.1.4.1.1608.1.1.1.2.1.19 | a2ControllerClass | 0 | 0 | Controller Class Type. |
1.3.6.1.4.1.1608.1.1.1.2.1.20 | a2ControllerModel | 0 | 0 | Controller Model Type. |
1.3.6.1.4.1.1608.1.1.1.2.1.22 | a2SlotNumber | 0 | 0 | Slot Number where the controller is physically present. Defined for EISA and MCA controller only. |
1.3.6.1.4.1.1608.1.1.1.2.1.23 | a2InterruptVectorNumber | 0 | 0 | Interrupt Vector Number being used by the controller. This value is a mapped IRQ supplied by Operating System and may not be sam… |
1.3.6.1.4.1.1608.1.1.1.2.1.24 | a2InterruptMode | 0 | 0 | Interrupt Mode - Edge/Level. |
1.3.6.1.4.1.1608.1.1.1.2.1.25 | a2NumberOfPhysicalDevices | 0 | 0 | Number Of Physical Devices detected on this controller. |
1.3.6.1.4.1.1608.1.1.1.2.1.26 | a2NumberOfPhysicalDevicesOffline | 0 | 0 | Number of Physical Devices, whose operational state is Offline. |
1.3.6.1.4.1.1608.1.1.1.2.1.27 | a2NumberOfLogicalDevices | 0 | 0 | Number of Logical Devices currently configured. |
1.3.6.1.4.1.1608.1.1.1.2.1.28 | a2NumberOfLogicalDevicesCritical | 0 | 0 | Number of Logical Devices, whose operational state is Critical. |
1.3.6.1.4.1.1608.1.1.1.2.1.29 | a2NumberOfLogicalDevicesOffline | 0 | 0 | Number of Logical Devices, whose operational state is Offline. |
1.3.6.1.4.1.1608.1.1.1.2.1.30 | a2FaultManagementType | 0 | 0 | Controller Fault Management Type. |
1.3.6.1.4.1.1608.1.1.1.2.1.31 | a2ArrayInformation | 0 | 0 | Information about Array(s) definition. The information is provided in Channel-Target combination form. |
1.3.6.1.4.1.1608.1.1.1.2.1.32 | a2LogicalDriveReadRequests, a2LogicalDriveReadRequestsCount | 0 | 0 | Number of Read Requests to Logical Drives. |
1.3.6.1.4.1.1608.1.1.1.2.1.33 | a2DataReadFromLogicalDrivesInMb | 0 | 0 | Amount of Data Read from all Logical Drives - in MB. |
1.3.6.1.4.1.1608.1.1.1.2.1.34 | a2LogicalDriveWriteRequests, a2LogicalDriveWriteRequestsCount | 0 | 0 | Number of Write Requests to Logical Drives. |
1.3.6.1.4.1.1608.1.1.1.2.1.35 | a2DataWrittenToLogicalDrivesInMb | 0 | 0 | Amount of data written to all Logical Drives - in MB. |
1.3.6.1.4.1.1608.1.1.1.2.1.36 | a2LogicalDrivesReadCacheHitPercentage | 0 | 0 | Logical Drives Read Data Cache Hit Rate. |
1.3.6.1.4.1.1608.1.1.1.2.1.37 | a2PhysicalDriveReadRequests, a2PhysicalDriveReadRequestsCount | 0 | 0 | Number of Read Requests to all physical drives. |
1.3.6.1.4.1.1608.1.1.1.2.1.38 | a2DataReadFromPhysicalDrivesInMb | 0 | 0 | Amount of Data Read from all physical drives - in MB. |
1.3.6.1.4.1.1608.1.1.1.2.1.39 | a2PhysicalDriveWriteRequests, a2PhysicalDriveWriteRequestsCount | 0 | 0 | Number of Write Requests to all physical drives on this controll r. |
1.3.6.1.4.1.1608.1.1.1.2.1.40 | a2DataWrittenToPhysicalDrivesInMb | 0 | 0 | Amount of data written all physical drives on this controller- in MB. |
1.3.6.1.4.1.1608.1.1.1.2.1.41 | a2StorageworksCabinetStatusOnChannel0 | 0 | 0 | StorageWorks Cabinet Status on Channel 0 |
1.3.6.1.4.1.1608.1.1.1.2.1.42 | a2StorageworksCabinetStatusOnChannel1 | 0 | 0 | StorageWorks Cabinet Status on Channel 1 |
1.3.6.1.4.1.1608.1.1.1.2.1.43 | a2StorageworksCabinetStatusOnChannel2 | 0 | 0 | StorageWorks Cabinet Status on Channel 2 |
1.3.6.1.4.1.1608.1.1.1.2.1.44 | a2BatteryBackupUnitStatus | 0 | 0 | Battery Backup Unit Status. |
1.3.6.1.4.1.1608.1.1.1.2.1.45 | a2PartnerControllerNumber | 0 | 0 | Dual Active Partner Controller Number |
1.3.6.1.4.1.1608.1.1.1.2.1.46 | a2WwName | 0 | 0 | Controller World Wide Name. |
1.3.6.1.4.1.1608.1.1.1.2.1.47 | a2HostControllerNumber | 0 | 0 | Host Controller Number. |
1.3.6.1.4.1.1608.1.1.1.2.1.48 | a2HostChannelNumber | 0 | 0 | Host Channel Number. |
1.3.6.1.4.1.1608.1.1.1.2.1.49 | a2HostTargetId | 0 | 0 | Host Target ID. |