Slot Number where the controller is physically
present. Defined for EISA and MCA controller only.
Parsed from file mylexraid.mib.txt
Company: None
Module: MYLEXRAID-MIB
Slot Number where the controller is physically present. Defined
for EISA and MCA controller only.
Parsed from file MYLEXRAID-MIB.mib
Module: MYLEXRAID-MIB
Vendor: Mylex Corporation
Module: MYLEXRAID-MIB
[Automatically extracted from oidview.com]
a2SlotNumber OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Slot Number where the controller is physically present. Defined for EISA and MCA controller only. " ::= {eControllerInformation 22}
a2SlotNumber OBJECT-TYPE SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Slot Number where the controller is physically present. Defined for EISA and MCA controller only. " ::= {eControllerInformation 22}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1608.1.1.1.2.1.1 | a2ControllerNumber | 0 | 0 | Controller Number assigned to this controller by the device driver. |
1.3.6.1.4.1.1608.1.1.1.2.1.2 | a2OperationalState | 0 | 0 | Operational state of this controller as seen by the device driver. |
1.3.6.1.4.1.1608.1.1.1.2.1.3 | a2FirmwareRevision | 0 | 0 | Controller Firmware Revision. |
1.3.6.1.4.1.1608.1.1.1.2.1.4 | a2ConfiguredChannels | 0 | 0 | Number of Channels that are part of controller configuration. |
1.3.6.1.4.1.1608.1.1.1.2.1.5 | a2ActualChannels | 0 | 0 | Number of Channels that are physically present on-board the controller. |
1.3.6.1.4.1.1608.1.1.1.2.1.6 | a2MaximumLogicalDrives | 0 | 0 | Maximum number of logical drives that can be configured on this controller. |
1.3.6.1.4.1.1608.1.1.1.2.1.7 | a2MaximumTargetsPerChannel | 0 | 0 | Maximum Number of Physical Target IDs supported per Channel |
1.3.6.1.4.1.1608.1.1.1.2.1.8 | a2MaximumTaggedRequests | 0 | 0 | Maximum Number of Tagged requests that may be sent to a Hard disk device by Controller Firmware. |
1.3.6.1.4.1.1608.1.1.1.2.1.9 | a2MaximumDataTransferSizePerIoRequestInK | 0 | 0 | Maximum amount of data that can be transferred per a single IO request - in KB. |
1.3.6.1.4.1.1608.1.1.1.2.1.10 | a2MaximumConcurrentCommands | 0 | 0 | Maximum number of requests that can be sent to the controller simultaneouly. |
1.3.6.1.4.1.1608.1.1.1.2.1.11 | a2RebuildRate | 0 | 0 | Value of Rebuild Rate. |
1.3.6.1.4.1.1608.1.1.1.2.1.12 | a2LogicalSectorSizeInBytes | 0 | 0 | Logical Sector Size in Bytes (Default: 512 bytes). |
1.3.6.1.4.1.1608.1.1.1.2.1.13 | a2PhysicalSectorSizeInBytes | 0 | 0 | Physical Sector Size in Bytes (Default: 512 bytes). |
1.3.6.1.4.1.1608.1.1.1.2.1.14 | a2CacheLineSizeInBytes | 0 | 0 | Cache Line Size in Bytes. |
1.3.6.1.4.1.1608.1.1.1.2.1.15 | a2CacheSizeInMb | 0 | 0 | Size of Controller Cache Module - in MB. |
1.3.6.1.4.1.1608.1.1.1.2.1.16 | a2CacheMemoryType | 0 | 0 | Controller Cache Memory Type. |
1.3.6.1.4.1.1608.1.1.1.2.1.17 | a2EpromSizeInKb | 0 | 0 | Size of Controller EPROM Module - in KB. |
1.3.6.1.4.1.1608.1.1.1.2.1.18 | a2BusType | 0 | 0 | Controller - System Bus Interface Type. |
1.3.6.1.4.1.1608.1.1.1.2.1.19 | a2ControllerClass | 0 | 0 | Controller Class Type. |
1.3.6.1.4.1.1608.1.1.1.2.1.20 | a2ControllerModel | 0 | 0 | Controller Model Type. |
1.3.6.1.4.1.1608.1.1.1.2.1.21 | a2SystemBusNumber | 0 | 0 | System Bus Number, for the bus the controller is interfacing with. This value is supplied by the Operating system and may not be… |
1.3.6.1.4.1.1608.1.1.1.2.1.23 | a2InterruptVectorNumber | 0 | 0 | Interrupt Vector Number being used by the controller. This value is a mapped IRQ supplied by Operating System and may not be sam… |
1.3.6.1.4.1.1608.1.1.1.2.1.24 | a2InterruptMode | 0 | 0 | Interrupt Mode - Edge/Level. |
1.3.6.1.4.1.1608.1.1.1.2.1.25 | a2NumberOfPhysicalDevices | 0 | 0 | Number Of Physical Devices detected on this controller. |
1.3.6.1.4.1.1608.1.1.1.2.1.26 | a2NumberOfPhysicalDevicesOffline | 0 | 0 | Number of Physical Devices, whose operational state is Offline. |
1.3.6.1.4.1.1608.1.1.1.2.1.27 | a2NumberOfLogicalDevices | 0 | 0 | Number of Logical Devices currently configured. |
1.3.6.1.4.1.1608.1.1.1.2.1.28 | a2NumberOfLogicalDevicesCritical | 0 | 0 | Number of Logical Devices, whose operational state is Critical. |
1.3.6.1.4.1.1608.1.1.1.2.1.29 | a2NumberOfLogicalDevicesOffline | 0 | 0 | Number of Logical Devices, whose operational state is Offline. |
1.3.6.1.4.1.1608.1.1.1.2.1.30 | a2FaultManagementType | 0 | 0 | Controller Fault Management Type. |
1.3.6.1.4.1.1608.1.1.1.2.1.31 | a2ArrayInformation | 0 | 0 | Information about Array(s) definition. The information is provided in Channel-Target combination form. |
1.3.6.1.4.1.1608.1.1.1.2.1.32 | a2LogicalDriveReadRequests, a2LogicalDriveReadRequestsCount | 0 | 0 | Number of Read Requests to Logical Drives. |
1.3.6.1.4.1.1608.1.1.1.2.1.33 | a2DataReadFromLogicalDrivesInMb | 0 | 0 | Amount of Data Read from all Logical Drives - in MB. |
1.3.6.1.4.1.1608.1.1.1.2.1.34 | a2LogicalDriveWriteRequests, a2LogicalDriveWriteRequestsCount | 0 | 0 | Number of Write Requests to Logical Drives. |
1.3.6.1.4.1.1608.1.1.1.2.1.35 | a2DataWrittenToLogicalDrivesInMb | 0 | 0 | Amount of data written to all Logical Drives - in MB. |
1.3.6.1.4.1.1608.1.1.1.2.1.36 | a2LogicalDrivesReadCacheHitPercentage | 0 | 0 | Logical Drives Read Data Cache Hit Rate. |
1.3.6.1.4.1.1608.1.1.1.2.1.37 | a2PhysicalDriveReadRequests, a2PhysicalDriveReadRequestsCount | 0 | 0 | Number of Read Requests to all physical drives. |
1.3.6.1.4.1.1608.1.1.1.2.1.38 | a2DataReadFromPhysicalDrivesInMb | 0 | 0 | Amount of Data Read from all physical drives - in MB. |
1.3.6.1.4.1.1608.1.1.1.2.1.39 | a2PhysicalDriveWriteRequests, a2PhysicalDriveWriteRequestsCount | 0 | 0 | Number of Write Requests to all physical drives on this controll r. |
1.3.6.1.4.1.1608.1.1.1.2.1.40 | a2DataWrittenToPhysicalDrivesInMb | 0 | 0 | Amount of data written all physical drives on this controller- in MB. |
1.3.6.1.4.1.1608.1.1.1.2.1.41 | a2StorageworksCabinetStatusOnChannel0 | 0 | 0 | StorageWorks Cabinet Status on Channel 0 |
1.3.6.1.4.1.1608.1.1.1.2.1.42 | a2StorageworksCabinetStatusOnChannel1 | 0 | 0 | StorageWorks Cabinet Status on Channel 1 |
1.3.6.1.4.1.1608.1.1.1.2.1.43 | a2StorageworksCabinetStatusOnChannel2 | 0 | 0 | StorageWorks Cabinet Status on Channel 2 |
1.3.6.1.4.1.1608.1.1.1.2.1.44 | a2BatteryBackupUnitStatus | 0 | 0 | Battery Backup Unit Status. |
1.3.6.1.4.1.1608.1.1.1.2.1.45 | a2PartnerControllerNumber | 0 | 0 | Dual Active Partner Controller Number |
1.3.6.1.4.1.1608.1.1.1.2.1.46 | a2WwName | 0 | 0 | Controller World Wide Name. |
1.3.6.1.4.1.1608.1.1.1.2.1.47 | a2HostControllerNumber | 0 | 0 | Host Controller Number. |
1.3.6.1.4.1.1608.1.1.1.2.1.48 | a2HostChannelNumber | 0 | 0 | Host Channel Number. |
1.3.6.1.4.1.1608.1.1.1.2.1.49 | a2HostTargetId | 0 | 0 | Host Target ID. |