sysSSelftestResult
View at oid-info.com
The test is performed by the active Common Logic card.
The result will be a sum of 2**n according to the following
bit convention:
For DXC:
bit 0 Database 1 Checksum Error (LSB)
bit 1 Database 2 Checksum Error
bit 2 I/O Expander Error
bit 3 Counter Error
bit 4 Matrix DPR Error
bit 5 PS-A 5 Volt Error
bit 6 PS-A 12 Volt Error
bit 7 PS-B 5 Volt Error
bit 8 PS-B 12 Volt Error
bit 9 EPROM Failure
For FCD:
bit 0 I/O Expander Error (LSB)
bit 1 Counter Error
bit 2 EPROM Failure
bit 3 Illegal Sys Config
bit 4 SFIFO
bit 5 EPIC Failure (ISDN)
bit 6 XL Flash Fail
bit 7 XL MITEL Fail
bit 8 XL Framer Fail
bit 9 XL DSP Fail
For LRS52 - refer to product's spec
When a bit is ('1'), the error exists.
When NO ERROR is encountered, this object's value will be 0.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
The test is performed by the active Common Logic card.
The result will be a sum of 2**n according to the following
bit convention:
For DXC:
bit 0 Database 1 Checksum Error (LSB)
bit 1 Database 2 Checksum Error
bit 2 I/O Expander Error
bit 3 Counter Error
bit 4 Matrix DPR Error
bit 5 PS-A 5 Volt Error
bit 6 PS-A 12 Volt Error
bit 7 PS-B 5 Volt Error
bit 8 PS-B 12 Volt Error
bit 9 EPROM Failure
For FCD:
bit 0 I/O Expander Error (LSB)
bit 1 Counter Error
bit 2 EPROM Failure
bit 3 Illegal Sys Config
bit 4 SFIFO
bit 5 EPIC Failure (ISDN)
bit 6 XL Flash Fail
bit 7 XL MITEL Fail
bit 8 XL Framer Fail
bit 9 XL DSP Fail
For LRS52 - refer to product's spec
When a bit is ('1'), the error exists.
When NO ERROR is encountered, this object's value will be 0.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications Ltd.
Module: DACS-MIB
[Automatically extracted from oidview.com]
sysSSelfTestResult OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The test is performed by the active Common Logic card. The result will be a sum of 2**n according to the following bit convention: For DXC: bit 0 Database 1 Checksum Error (LSB) bit 1 Database 2 Checksum Error bit 2 I/O Expander Error bit 3 Counter Error bit 4 Matrix DPR Error bit 5 PS-A 5 Volt Error bit 6 PS-A 12 Volt Error bit 7 PS-B 5 Volt Error bit 8 PS-B 12 Volt Error bit 9 EPROM Failure For FCD: bit 0 I/O Expander Error (LSB) bit 1 Counter Error bit 2 EPROM Failure bit 3 Illegal Sys Config bit 4 SFIFO bit 5 EPIC Failure (ISDN) bit 6 XL Flash Fail bit 7 XL MITEL Fail bit 8 XL Framer Fail bit 9 XL DSP Fail For LRS52 - refer to product's spec When a bit is ('1'), the error exists. When NO ERROR is encountered, this object's value will be 0." ::= { sysStatus 15 }
sysSSelfTestResult OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The test is performed by the active Common Logic card. The result will be a sum of 2**n according to the following bit convention: For DXC: bit 0 Database 1 Checksum Error (LSB) bit 1 Database 2 Checksum Error bit 2 I/O Expander Error bit 3 Counter Error bit 4 Matrix DPR Error bit 5 PS-A 5 Volt Error bit 6 PS-A 12 Volt Error bit 7 PS-B 5 Volt Error bit 8 PS-B 12 Volt Error bit 9 EPROM Failure For FCD: bit 0 I/O Expander Error (LSB) bit 1 Counter Error bit 2 EPROM Failure bit 3 Illegal Sys Config bit 4 SFIFO bit 5 EPIC Failure (ISDN) bit 6 XL Flash Fail bit 7 XL MITEL Fail bit 8 XL Framer Fail bit 9 XL DSP Fail For LRS52 - refer to product's spec When a bit is ('1'), the error exists. When NO ERROR is encountered, this object's value will be 0." ::= { sysStatus 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.3.1.3.15.0 | sysSSelfTestResult | 0 | 0 | sysSSelftestResult |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.3.1.3.1 | sysSDateFormat | 1 | 1 | This object indicates the date and time format used for the sysSDateAndTimeCmd and for the alarm buffer report. |
| 1.3.6.1.4.1.164.3.3.1.3.2 | sysSDateCmd | 1 | 1 | This object indicates the current date as it is known by the agent using its own real-time clock. The format would be as specifie… |
| 1.3.6.1.4.1.164.3.3.1.3.3 | sysSTimeCmd | 1 | 1 | This object indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for … |
| 1.3.6.1.4.1.164.3.3.1.3.4 | sysSActiveCnfg | 1 | 1 | This object specifies the configuration number, that is currently active and running. |
| 1.3.6.1.4.1.164.3.3.1.3.5 | sysSEditCnfg | 1 | 1 | This object indicates the unique configuration number that is currently loaded into the tmp working space for manipulation and … |
| 1.3.6.1.4.1.164.3.3.1.3.6 | sysSEditBy | 1 | 1 | This entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operatio… |
| 1.3.6.1.4.1.164.3.3.1.3.7 | sysSClkSrc | 1 | 1 | This entry indicates the source of the system clock. |
| 1.3.6.1.4.1.164.3.3.1.3.8 | sysSAlrStatus | 1 | 1 | Indicates the current alarm state only for system level. This object will be : - critical(7): when there is at least one active (… |
| 1.3.6.1.4.1.164.3.3.1.3.9 | sysSAlrStatusAll | 1 | 1 | Indicates the current alarm state including all levels: system, card, port. - critical(7): when there is at least one active (ON)… |
| 1.3.6.1.4.1.164.3.3.1.3.10 | sysSTestStatus | 1 | 1 | Indicates the current test status (for all levels: system, card, port). This attribute will be set to: - on(3): when there is at l… |
| 1.3.6.1.4.1.164.3.3.1.3.11 | sysSSanityCheckStatus | 1 | 1 | Upon completion of the Sanity Check process on the TmpCnfg this object will be set to: - fail(2): when there is at least one erro… |
| 1.3.6.1.4.1.164.3.3.1.3.12 | sysSNoOfSanityCheckErr | 1 | 1 | This object indicates the number of errors/warnings discovered by the last Sanity Check process. |
| 1.3.6.1.4.1.164.3.3.1.3.13 | sysSErrListTable | 1 | 4 | A table. |
| 1.3.6.1.4.1.164.3.3.1.3.14 | sysSMaxNoOfCnfg | 1 | 1 | Maximum number of configurations that can be defined and stored in the DACS agent. If the DACS agent has a large capacity, the ma… |
| 1.3.6.1.4.1.164.3.3.1.3.16 | sysSRelayState | 1 | 1 | Indicates the current state of the alarm relay. notApplicable - for agents that do not support this object. |
| 1.3.6.1.4.1.164.3.3.1.3.17 | sysSInvertedAlr | 1 | 1 | Indicates if there is any Inverted alarm at any level of the system (sys, card, port). notApplicable - for agents that do not sup… |
| 1.3.6.1.4.1.164.3.3.1.3.18 | sysSRdnFlipTable | 1 | 7 | This table includes all the Flip events due to I/O Redundancy since last Clear command of this table. |
| 1.3.6.1.4.1.164.3.3.1.3.19 | sysSRdnFlipTableClearCmd | 1 | 1 | This command, when Set to 'on', clears the Redundancy Flip table (sysSRdnFlipTable). After clear is performed, the agent will tu… |
| 1.3.6.1.4.1.164.3.3.1.3.20 | sysSRdnFlipCmd | 1 | 1 | This object enables the user to send a command to the Agent, to Flip from a current Online IO card to its Redundant card. The val… |
| 1.3.6.1.4.1.164.3.3.1.3.21 | sysSBusTable | 1 | 5 | This table includes data and status about the internal DXC BUS. |
| 1.3.6.1.4.1.164.3.3.1.3.22 | sysSRdnCmdTable | 1 | 2 | This table includes commands used for IO Redundancy. |