Description 1
Wave shape of station clock source signal.
Sources for this description
Netdisco MIB archive copiesRAD MIB copies (Observium Community)
OID reference
1.3.6.1.4.1.164.6.2.15.5.1.1.15
Wave shape of station clock source signal.
Identification
{1 3 6 1 4 1 164 6 2 15 5 1 1 15}
| Value | Name |
|---|---|
| 1 | notApplicable |
| 2 | sine |
| 3 | square |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RAD-MIB, the row index prtParamIdx is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.164.6.2.15.5.1.1.15.<prtParamIdx>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.6.2.15.5.1.1.15
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
prtParamClkWaveShape OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
sine (2),
square (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wave shape of station clock source signal."
::= { prtParamEntry 15 }prtParamClkWaveShape OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
sine (2),
square (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wave shape of station clock source signal.
This parameter is applicable only when prtParamInterfaceType value
is one of the following: f1544kHz(15), f2048kHz(16)."
::= { prtParamEntry 15 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Wave shape of station clock source signal.
Netdisco MIB archive copiesRAD MIB copies (Observium Community)
Description 2
Wave shape of station clock source signal. This parameter is applicable only when prtParamInterfaceType value is one of the following: f1544kHz(15), f2048kHz(16).
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: prtParamClkWaveShape
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"prtParamClkWaveShape",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notApplicable",
"(",
"1",
")",
",",
"sine",
"(",
"2",
")",
",",
"square",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Wave shape of station clock source signal.\"",
"::=",
"{",
"prtParamEntry",
"15",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notApplicable",
1
],
[
"sine",
2
],
[
"square",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Wave shape of station clock source signal."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'InterfaceIndexOrZero', 'ifDescr'], 'APS-MIB': ['apsConfigEntry'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'aal5VccVpi', 'aal5VccVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3ConfigEntry', 'dsx3LoopbackStatus'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'MAU-MIB': ['rpMauMediaAvailable'], 'ATMF-CES': ['atmfCESCbrIndex', 'atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['TimeStamp', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'TruthValue', 'RowPointer'], 'ATM-TC-MIB': ['AtmTrafficDescrParamIndex'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'enterprises', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RFC1381-MIB': ['IfIndexType'], 'DIFFSERV-MIB': ['IndexIntegerNextFree', 'IndexInteger'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanStaticEntry'], 'DS0BUNDLE-MIB': ['dsx0BundleEntry'], 'FRNETSERV-MIB': ['frPVCEndptDLCIIndex'], 'FDDI-SMT73-MIB': ['fddimibPORTPCMState'], 'IANAifType-MIB': ['IANAifType'], 'MPLS-TC-STD-MIB': ['MplsLabel', 'MplsTunnelIndex', 'MplsOwner', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-REPEATER-MIB': ['rptrGroupOperStatus', 'rptrPortOperStatus'], 'MULTI-MEDIA-MIB-TC': ['MmTAddressTag', 'MmEndpointID', 'MmAliasAddress', 'MmH323EndpointType', 'MmGatekeeperID', 'MmAliasTag'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry'], 'HDSL2-SHDSL-LINE-MIB': ['hdsl2ShdslEndpointCurrEntry', 'hdsl2ShdslInvIndex', 'hdsl2ShdslEndpointSide', 'hdsl2ShdslSpanConfProfileEntry'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: RAD-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'ifDescr'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry'], 'DS1-MIB': ['dsx1CurrentIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LineIndex', 'dsx1TotalIndex', 'dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3LoopbackStatus', 'dsx3ConfigEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['RowStatus', 'DateAndTime', 'TimeStamp', 'TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'RowPointer', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter64'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanId', 'PortList', 'dot1qVlanStaticEntry'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Related source files and packages:
Status in source: current.
Names: prtParamClkWaveShape
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"prtParamClkWaveShape",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notApplicable",
"(",
"1",
")",
",",
"sine",
"(",
"2",
")",
",",
"square",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Wave shape of station clock source signal. This parameter is applicable only when prtParamInterfaceType value is one of the following: f1544kHz(15), f2048kHz(16).\"",
"::=",
"{",
"prtParamEntry",
"15",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notApplicable",
1
],
[
"sine",
2
],
[
"square",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Wave shape of station clock source signal. This parameter is applicable only when prtParamInterfaceType value is one of the following: f1544kHz(15), f2048kHz(16)."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-GEN-MIB
See published definition above
{'IF-MIB': ['ifAlias', 'ifIndex'], 'RAD-TC': ['FileType', 'RadEntityType', 'AlarmForwardingCause'], 'SNMPv2-TC': ['TimeStamp', 'TDomain', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'RowPointer', 'MacAddress'], 'ENTITY-MIB': ['entPhysicalAlias', 'entPhysicalDescr', 'PhysicalIndexOrZero'], 'SNMPv2-MIB': ['sysName'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RAD-SMI-MIB': ['radGen', 'radSpecificDevices', 'systems', 'fileTransfer'], 'IANAifType-MIB': ['IANAifType'], 'BFD-TC-STD-MIB-R': ['BfdDiagTC', 'BfdIntervalTC'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.2.15.5.1.1.1 | prtParamIdx | 0 | 0 | This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. … |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.2 | prtControlCnfg | 0 | 0 | This object may be used for port RW general parameter/s. For detailed meaning, see product's spec. Supported by: PRBi-E3/T3. For … |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.3 | prtParamClkSrc | 0 | 0 | The source of Transmit Clock. 'loopTiming' or 'loopback' indicates that the recovered receive clock is used as the transmit clock… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.4 | prtParamPhantom | 0 | 0 | Power feeding to another device. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.5 | prtParamResetStatsCmd | 0 | 0 | Reset statistics of the selected port. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.6 | prtParamLastResetStatsTime | 0 | 0 | The value of MIB II's sysUpTime object at the last time that prtParamResetStatsCmd was Set to on(3) for this port. If prtParamRes… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.7 | prtParamInterfaceType | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.8 | prtParamClearAlarm | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.9 | prtParamLeds | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.10 | prtParamLineLength | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.11 | prtParamUsage | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.12 | prtParamMappingMode | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.13 | prtParamAlarmIndication | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.14 | prtParamClkQualityLevel | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.16 | prtParamStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.17 | prtParamSignalLevel | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.18 | prtParamClkUserQualityLevel | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.19 | prtParamDataRate | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.20 | prtParamLoopDetect | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.21 | prtParamActUponLoopDetect | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.22 | prtParamPSNLayer | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.23 | prtParamRxSsm | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.24 | prtParamClkSsmRxSource | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.26 | prtParamFarEndDevice | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.27 | prtParamTxClk | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.28 | prtParamSdBerThreshold | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.29 | prtParamLoopDetectStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.30 | prtParamSupportedFeatures | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.31 | prtParamPortStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.34 | prtParamSsmTx | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.36 | prtParamAlias | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.38 | prtParamTxClockInstance | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.41 | prtParamEntPhysicalIndex | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.45 | prtParamSsmTxType | 0 | 0 |