Description 1
The type of the port.
Sources for this description
Netdisco MIB archive copiesRAD MIB copies (Observium Community)
OID reference
1.3.6.1.4.1.164.6.2.15.5.1.1.7
The type of the port.
Identification
{1 3 6 1 4 1 164 6 2 15 5 1 1 7}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it. Notes below names come from selected MIB definitions.
| Value | Name and source notes | Source variants |
|---|---|---|
| 1 | notApplicable | 1, 2, 3 |
| 2 | e1 | 1, 2, 3 |
| 3 | t1 | 1, 2, 3 |
| 4 | fr | 1, 2, 3 |
| 5 | hdlc | 1, 2, 3 |
| 6 | hdsl2 | 1, 2 |
| 7 | shdsl | 1, 2 |
| 8 | adsl | 1, 2 |
| 9 | adsl2 | 1, 2 |
| 10 | reAdsl2 | 1, 2 |
| 11 | mPair | 1, 2 |
| 12 | efm 64-65 Octets | 1, 2 |
| 13 | atmIma | 1, 2 |
| 14 | ds1 | 1, 2 |
| 15 | f1544kHz 1.544 MHz | 2 |
| 16 | f2048kHz 2.048 MHz | 2 |
| 17 | f64kHz | 2 |
| 18 | gps | 2 |
| 19 | j1 | 2 |
| 20 | ethernet All ethernet interfaces | 2 |
| 21 | svi Service virtual interface | 2 |
| 22 | logicalMac | 2 |
| 23 | lag Link aggregation group | 2 |
| 24 | sag Service aggregation group | 2 |
| 25 | sap Service aggregation point | 2 |
| 26 | etpTransport ETP Transport port | 2 |
| 27 | etpSubscriber ETP Subscriber port | 2 |
| 28 | r1pps | 2 |
| 29 | miniBnc | 2 |
| 30 | e3 | 2 |
| 31 | t3 | 2 |
| 32 | sonetSdh | 2 |
| 33 | ds1Opt C.37.94 link of MP-4 VS-6/C.37 Card | 2 |
| 34 | tdmBridge TDM Bridge of MP-4 VS cards | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ACE2002-MIB, the row index prtParamIdx is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.164.6.2.15.5.1.1.7.<prtParamIdx>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.6.2.15.5.1.1.7
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
prtParamInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
e1 (2),
t1 (3),
fr (4),
hdlc (5),
hdsl2 (6),
shdsl (7),
adsl (8),
adsl2 (9),
reAdsl2 (10),
mPair (11),
efm (12), --64-65 Octets
atmIma (13),
ds1 (14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the port."
::= { prtParamEntry 7 }prtParamInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
e1 (2),
t1 (3),
fr (4),
hdlc (5),
hdsl2 (6),
shdsl (7),
adsl (8),
adsl2 (9),
reAdsl2 (10),
mPair (11),
efm (12), --64-65 Octets
atmIma (13),
ds1 (14),
f1544kHz (15), -- 1.544 MHz
f2048kHz (16), -- 2.048 MHz
f64kHz (17),
gps (18),
j1 (19),
ethernet (20), -- All ethernet interfaces
svi (21), -- Service virtual interface
logicalMac (22),
lag (23), -- Link aggregation group
sag (24), -- Service aggregation group
sap (25), -- Service aggregation point
etpTransport (26), -- ETP Transport port
etpSubscriber (27), -- ETP Subscriber port
r1pps (28),
miniBnc (29),
e3 (30),
t3 (31),
sonetSdh (32),
ds1Opt (33), -- C.37.94 link of MP-4 VS-6/C.37 Card
tdmBridge (34) -- TDM Bridge of MP-4 VS cards
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface type of the port, or the frequency used as
clock reference. Clock reference values may be either e1(2)
or t1(3), gps (18) or wave with the specified frequency:
f1544kHz(15), f2048kHz(16) or f64kHz (17).
f1544kHz = 1.544 Mhz (T1 rate),
f2048kHz = 2.048 Mhz = (E1 rate).
When one of the frequency values (15), (16) is used, Clock
reference signal may be have either Sine or Square waveshape
Waveshape is defined by other object of this table:
prtParamClkWaveShape."
::= { prtParamEntry 7 }prtParamInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
e1 (2),
t1 (3),
fr (4),
hdlc (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the port."
::= { prtParamEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The type of the port.
Netdisco MIB archive copiesRAD MIB copies (Observium Community)
Description 2
The interface type of the port, or the frequency used as clock reference. Clock reference values may be either e1(2) or t1(3), gps (18) or wave with the specified frequency: f1544kHz(15), f2048kHz(16) or f64kHz (17). f1544kHz = 1.544 Mhz (T1 rate), f2048kHz = 2.048 Mhz = (E1 rate). When one of the frequency values (15), (16) is used, Clock reference signal may be have either Sine or Square waveshape Waveshape is defined by other object of this table: prtParamClkWaveShape.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: prtParamInterfaceType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"prtParamInterfaceType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notApplicable",
"(",
"1",
")",
",",
"e1",
"(",
"2",
")",
",",
"t1",
"(",
"3",
")",
",",
"fr",
"(",
"4",
")",
",",
"hdlc",
"(",
"5",
")",
",",
"hdsl2",
"(",
"6",
")",
",",
"shdsl",
"(",
"7",
")",
",",
"adsl",
"(",
"8",
")",
",",
"adsl2",
"(",
"9",
")",
",",
"reAdsl2",
"(",
"10",
")",
",",
"mPair",
"(",
"11",
")",
",",
"efm",
"(",
"12",
")",
",",
"atmIma",
"(",
"13",
")",
",",
"ds1",
"(",
"14",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The type of the port.\"",
"::=",
"{",
"prtParamEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notApplicable",
1
],
[
"e1",
2
],
[
"t1",
3
],
[
"fr",
4
],
[
"hdlc",
5
],
[
"hdsl2",
6
],
[
"shdsl",
7
],
[
"adsl",
8
],
[
"adsl2",
9
],
[
"reAdsl2",
10
],
[
"mPair",
11
],
[
"efm",
12
],
[
"atmIma",
13
],
[
"ds1",
14
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The type of the port."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'InterfaceIndexOrZero', 'ifDescr'], 'APS-MIB': ['apsConfigEntry'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'aal5VccVpi', 'aal5VccVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3ConfigEntry', 'dsx3LoopbackStatus'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'MAU-MIB': ['rpMauMediaAvailable'], 'ATMF-CES': ['atmfCESCbrIndex', 'atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['TimeStamp', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'TruthValue', 'RowPointer'], 'ATM-TC-MIB': ['AtmTrafficDescrParamIndex'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'enterprises', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RFC1381-MIB': ['IfIndexType'], 'DIFFSERV-MIB': ['IndexIntegerNextFree', 'IndexInteger'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanStaticEntry'], 'DS0BUNDLE-MIB': ['dsx0BundleEntry'], 'FRNETSERV-MIB': ['frPVCEndptDLCIIndex'], 'FDDI-SMT73-MIB': ['fddimibPORTPCMState'], 'IANAifType-MIB': ['IANAifType'], 'MPLS-TC-STD-MIB': ['MplsLabel', 'MplsTunnelIndex', 'MplsOwner', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-REPEATER-MIB': ['rptrGroupOperStatus', 'rptrPortOperStatus'], 'MULTI-MEDIA-MIB-TC': ['MmTAddressTag', 'MmEndpointID', 'MmAliasAddress', 'MmH323EndpointType', 'MmGatekeeperID', 'MmAliasTag'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry'], 'HDSL2-SHDSL-LINE-MIB': ['hdsl2ShdslEndpointCurrEntry', 'hdsl2ShdslInvIndex', 'hdsl2ShdslEndpointSide', 'hdsl2ShdslSpanConfProfileEntry'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: RAD-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'ifDescr'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry'], 'DS1-MIB': ['dsx1CurrentIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LineIndex', 'dsx1TotalIndex', 'dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3LoopbackStatus', 'dsx3ConfigEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['RowStatus', 'DateAndTime', 'TimeStamp', 'TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'RowPointer', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter64'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanId', 'PortList', 'dot1qVlanStaticEntry'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Related source files and packages:
Status in source: current.
Names: prtParamInterfaceType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"prtParamInterfaceType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notApplicable",
"(",
"1",
")",
",",
"e1",
"(",
"2",
")",
",",
"t1",
"(",
"3",
")",
",",
"fr",
"(",
"4",
")",
",",
"hdlc",
"(",
"5",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The type of the port.\"",
"::=",
"{",
"prtParamEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notApplicable",
1
],
[
"e1",
2
],
[
"t1",
3
],
[
"fr",
4
],
[
"hdlc",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The type of the port."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: ACE2002-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex'], 'ATM-MIB': ['atmVclEntry', 'aal5VccEntry', 'aal5VccVpi', 'aal5VccVci', 'atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'ATMF-CES': ['atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TimeStamp', 'DateAndTime', 'TruthValue'], 'BRIDGE-MIB': ['dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Counter64', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Status in source: current.
Names: prtParamInterfaceType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"prtParamInterfaceType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notApplicable",
"(",
"1",
")",
",",
"e1",
"(",
"2",
")",
",",
"t1",
"(",
"3",
")",
",",
"fr",
"(",
"4",
")",
",",
"hdlc",
"(",
"5",
")",
",",
"hdsl2",
"(",
"6",
")",
",",
"shdsl",
"(",
"7",
")",
",",
"adsl",
"(",
"8",
")",
",",
"adsl2",
"(",
"9",
")",
",",
"reAdsl2",
"(",
"10",
")",
",",
"mPair",
"(",
"11",
")",
",",
"efm",
"(",
"12",
")",
",",
"atmIma",
"(",
"13",
")",
",",
"ds1",
"(",
"14",
")",
",",
"f1544kHz",
"(",
"15",
")",
",",
"f2048kHz",
"(",
"16",
")",
",",
"f64kHz",
"(",
"17",
")",
",",
"gps",
"(",
"18",
")",
",",
"j1",
"(",
"19",
")",
",",
"ethernet",
"(",
"20",
")",
",",
"svi",
"(",
"21",
")",
",",
"logicalMac",
"(",
"22",
")",
",",
"lag",
"(",
"23",
")",
",",
"sag",
"(",
"24",
")",
",",
"sap",
"(",
"25",
")",
",",
"etpTransport",
"(",
"26",
")",
",",
"etpSubscriber",
"(",
"27",
")",
",",
"r1pps",
"(",
"28",
")",
",",
"miniBnc",
"(",
"29",
")",
",",
"e3",
"(",
"30",
")",
",",
"t3",
"(",
"31",
")",
",",
"sonetSdh",
"(",
"32",
")",
",",
"ds1Opt",
"(",
"33",
")",
",",
"tdmBridge",
"(",
"34",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The interface type of the port, or the frequency used as clock reference. Clock reference values may be either e1(2) or t1(3), gps (18) or wave with the specified frequency: f1544kHz(15), f2048kHz(16) or f64kHz (17). f1544kHz = 1.544 Mhz (T1 rate), f2048kHz = 2.048 Mhz = (E1 rate). When one of the frequency values (15), (16) is used, Clock reference signal may be have either Sine or Square waveshape Waveshape is defined by other object of this table: prtParamClkWaveShape.\"",
"::=",
"{",
"prtParamEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notApplicable",
1
],
[
"e1",
2
],
[
"t1",
3
],
[
"fr",
4
],
[
"hdlc",
5
],
[
"hdsl2",
6
],
[
"shdsl",
7
],
[
"adsl",
8
],
[
"adsl2",
9
],
[
"reAdsl2",
10
],
[
"mPair",
11
],
[
"efm",
12
],
[
"atmIma",
13
],
[
"ds1",
14
],
[
"f1544kHz",
15
],
[
"f2048kHz",
16
],
[
"f64kHz",
17
],
[
"gps",
18
],
[
"j1",
19
],
[
"ethernet",
20
],
[
"svi",
21
],
[
"logicalMac",
22
],
[
"lag",
23
],
[
"sag",
24
],
[
"sap",
25
],
[
"etpTransport",
26
],
[
"etpSubscriber",
27
],
[
"r1pps",
28
],
[
"miniBnc",
29
],
[
"e3",
30
],
[
"t3",
31
],
[
"sonetSdh",
32
],
[
"ds1Opt",
33
],
[
"tdmBridge",
34
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The interface type of the port, or the frequency used as clock reference. Clock reference values may be either e1(2) or t1(3), gps (18) or wave with the specified frequency: f1544kHz(15), f2048kHz(16) or f64kHz (17). f1544kHz = 1.544 Mhz (T1 rate), f2048kHz = 2.048 Mhz = (E1 rate). When one of the frequency values (15), (16) is used, Clock reference signal may be have either Sine or Square waveshape Waveshape is defined by other object of this table: prtParamClkWaveShape."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-GEN-MIB
See published definition above
{'IF-MIB': ['ifAlias', 'ifIndex'], 'RAD-TC': ['FileType', 'RadEntityType', 'AlarmForwardingCause'], 'SNMPv2-TC': ['TimeStamp', 'TDomain', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'RowPointer', 'MacAddress'], 'ENTITY-MIB': ['entPhysicalAlias', 'entPhysicalDescr', 'PhysicalIndexOrZero'], 'SNMPv2-MIB': ['sysName'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RAD-SMI-MIB': ['radGen', 'radSpecificDevices', 'systems', 'fileTransfer'], 'IANAifType-MIB': ['IANAifType'], 'BFD-TC-STD-MIB-R': ['BfdDiagTC', 'BfdIntervalTC'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.2.15.5.1.1.1 | prtParamIdx | 0 | 0 | This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. … |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.2 | prtControlCnfg | 0 | 0 | This object may be used for port RW general parameter/s. For detailed meaning, see product's spec. Supported by: PRBi-E3/T3. For … |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.3 | prtParamClkSrc | 0 | 0 | The source of Transmit Clock. 'loopTiming' or 'loopback' indicates that the recovered receive clock is used as the transmit clock… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.4 | prtParamPhantom | 0 | 0 | Power feeding to another device. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.5 | prtParamResetStatsCmd | 0 | 0 | Reset statistics of the selected port. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.6 | prtParamLastResetStatsTime | 0 | 0 | The value of MIB II's sysUpTime object at the last time that prtParamResetStatsCmd was Set to on(3) for this port. If prtParamRes… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.8 | prtParamClearAlarm | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.9 | prtParamLeds | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.10 | prtParamLineLength | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.11 | prtParamUsage | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.12 | prtParamMappingMode | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.13 | prtParamAlarmIndication | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.14 | prtParamClkQualityLevel | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.15 | prtParamClkWaveShape | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.16 | prtParamStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.17 | prtParamSignalLevel | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.18 | prtParamClkUserQualityLevel | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.19 | prtParamDataRate | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.20 | prtParamLoopDetect | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.21 | prtParamActUponLoopDetect | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.22 | prtParamPSNLayer | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.23 | prtParamRxSsm | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.24 | prtParamClkSsmRxSource | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.26 | prtParamFarEndDevice | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.27 | prtParamTxClk | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.28 | prtParamSdBerThreshold | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.29 | prtParamLoopDetectStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.30 | prtParamSupportedFeatures | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.31 | prtParamPortStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.34 | prtParamSsmTx | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.36 | prtParamAlias | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.38 | prtParamTxClockInstance | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.41 | prtParamEntPhysicalIndex | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.45 | prtParamSsmTxType | 0 | 0 |