OID reference
1.3.6.1.4.1.164.6.2.15.5.1.1.26
Programmed Far-End device connected to this port. This object is relevant for products having multiple DBs. It will enable configuring offline, the relevant data. For MP-4100, LRS-102 OP-108/106 cards, the options will be: 1 = None (when a port is not connected to any remote device) 2 = OP-108 3 = OP-108/ETH 4 = OP-10…
Identification
{1 3 6 1 4 1 164 6 2 15 5 1 1 26}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RAD-MIB, the row index prtParamIdx is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.164.6.2.15.5.1.1.26.<prtParamIdx>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.6.2.15.5.1.1.26
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
prtParamFarEndDevice OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Programmed Far-End device connected to this port.
This object is relevant for products having multiple DBs.
It will enable configuring offline, the relevant data.
For MP-4100, LRS-102 OP-108/106 cards, the options will be:
1 = None (when a port is not connected to any remote device)
2 = OP-108
3 = OP-108/ETH
4 = OP-106
5 = OP-106/ETH
6 = card of MP or LRS-102"
::= { prtParamEntry 26}prtParamFarEndDevice OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Programmed Far-End device connected to this port.
This object is relevant for products having multiple DBs.
It will enable configuring offline, the relevant data.
For MP-4100, LRS-102 OP-108/106 cards, the options will be:
1 = None (when a port is not connected to any remote device)
2 = OP-108
3 = OP-108/ETH
4 = OP-106
5 = OP-106/ETH
6 = card of MP or LRS-102"
::= { prtParamEntry 26}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Programmed Far-End device connected to this port. This object is relevant for products having multiple DBs. It will enable configuring offline, the relevant data. For MP-4100, LRS-102 OP-108/106 cards, the options will be: 1 = None (when a port is not connected to any remote device) 2 = OP-108 3 = OP-108/ETH 4 = OP-106 5 = OP-106/ETH 6 = card of MP or LRS-102
Netdisco MIB archive copiesRAD MIB copies (Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: prtParamFarEndDevice
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"prtParamFarEndDevice",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Programmed Far-End device connected to this port. This object is relevant for products having multiple DBs. It will enable configuring offline, the relevant data. For MP-4100, LRS-102 OP-108/106 cards, the options will be: 1 = None (when a port is not connected to any remote device) 2 = OP-108 3 = OP-108/ETH 4 = OP-106 5 = OP-106/ETH 6 = card of MP or LRS-102\"",
"::=",
"{",
"prtParamEntry",
"26",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Programmed Far-End device connected to this port. This object is relevant for products having multiple DBs. It will enable configuring offline, the relevant data. For MP-4100, LRS-102 OP-108/106 cards, the options will be: 1 = None (when a port is not connected to any remote device) 2 = OP-108 3 = OP-108/ETH 4 = OP-106 5 = OP-106/ETH 6 = card of MP or LRS-102"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'InterfaceIndexOrZero', 'ifDescr'], 'APS-MIB': ['apsConfigEntry'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'aal5VccVpi', 'aal5VccVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3ConfigEntry', 'dsx3LoopbackStatus'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'MAU-MIB': ['rpMauMediaAvailable'], 'ATMF-CES': ['atmfCESCbrIndex', 'atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['TimeStamp', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'TruthValue', 'RowPointer'], 'ATM-TC-MIB': ['AtmTrafficDescrParamIndex'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'enterprises', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RFC1381-MIB': ['IfIndexType'], 'DIFFSERV-MIB': ['IndexIntegerNextFree', 'IndexInteger'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanStaticEntry'], 'DS0BUNDLE-MIB': ['dsx0BundleEntry'], 'FRNETSERV-MIB': ['frPVCEndptDLCIIndex'], 'FDDI-SMT73-MIB': ['fddimibPORTPCMState'], 'IANAifType-MIB': ['IANAifType'], 'MPLS-TC-STD-MIB': ['MplsLabel', 'MplsTunnelIndex', 'MplsOwner', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-REPEATER-MIB': ['rptrGroupOperStatus', 'rptrPortOperStatus'], 'MULTI-MEDIA-MIB-TC': ['MmTAddressTag', 'MmEndpointID', 'MmAliasAddress', 'MmH323EndpointType', 'MmGatekeeperID', 'MmAliasTag'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry'], 'HDSL2-SHDSL-LINE-MIB': ['hdsl2ShdslEndpointCurrEntry', 'hdsl2ShdslInvIndex', 'hdsl2ShdslEndpointSide', 'hdsl2ShdslSpanConfProfileEntry'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-GEN-MIB
See published definition above
{'IF-MIB': ['ifAlias', 'ifIndex'], 'RAD-TC': ['FileType', 'RadEntityType', 'AlarmForwardingCause'], 'SNMPv2-TC': ['TimeStamp', 'TDomain', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'RowPointer', 'MacAddress'], 'ENTITY-MIB': ['entPhysicalAlias', 'entPhysicalDescr', 'PhysicalIndexOrZero'], 'SNMPv2-MIB': ['sysName'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RAD-SMI-MIB': ['radGen', 'radSpecificDevices', 'systems', 'fileTransfer'], 'IANAifType-MIB': ['IANAifType'], 'BFD-TC-STD-MIB-R': ['BfdDiagTC', 'BfdIntervalTC'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Vendor MIB copy from the Netdisco archive.
Module: RAD-MIB
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'ifDescr'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry'], 'DS1-MIB': ['dsx1CurrentIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LineIndex', 'dsx1TotalIndex', 'dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3LoopbackStatus', 'dsx3ConfigEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['RowStatus', 'DateAndTime', 'TimeStamp', 'TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'RowPointer', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter64'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanId', 'PortList', 'dot1qVlanStaticEntry'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.2.15.5.1.1.1 | prtParamIdx | 0 | 0 | This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. … |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.2 | prtControlCnfg | 0 | 0 | This object may be used for port RW general parameter/s. For detailed meaning, see product's spec. Supported by: PRBi-E3/T3. For … |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.3 | prtParamClkSrc | 0 | 0 | The source of Transmit Clock. 'loopTiming' or 'loopback' indicates that the recovered receive clock is used as the transmit clock… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.4 | prtParamPhantom | 0 | 0 | Power feeding to another device. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.5 | prtParamResetStatsCmd | 0 | 0 | Reset statistics of the selected port. |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.6 | prtParamLastResetStatsTime | 0 | 0 | The value of MIB II's sysUpTime object at the last time that prtParamResetStatsCmd was Set to on(3) for this port. If prtParamRes… |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.7 | prtParamInterfaceType | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.8 | prtParamClearAlarm | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.9 | prtParamLeds | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.10 | prtParamLineLength | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.11 | prtParamUsage | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.12 | prtParamMappingMode | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.13 | prtParamAlarmIndication | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.14 | prtParamClkQualityLevel | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.15 | prtParamClkWaveShape | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.16 | prtParamStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.17 | prtParamSignalLevel | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.18 | prtParamClkUserQualityLevel | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.19 | prtParamDataRate | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.20 | prtParamLoopDetect | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.21 | prtParamActUponLoopDetect | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.22 | prtParamPSNLayer | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.23 | prtParamRxSsm | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.24 | prtParamClkSsmRxSource | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.27 | prtParamTxClk | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.28 | prtParamSdBerThreshold | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.29 | prtParamLoopDetectStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.30 | prtParamSupportedFeatures | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.31 | prtParamPortStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.34 | prtParamSsmTx | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.36 | prtParamAlias | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.38 | prtParamTxClockInstance | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.41 | prtParamEntPhysicalIndex | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.5.1.1.45 | prtParamSsmTxType | 0 | 0 |